Aksesuāri uzlādes stacijām

Specification

Brand: Akyga
Colour: Black
Cablelength: 3 m
Connectors:
- CEE 7/7 (straight plug)
- IEC C5 ("cloverleaf" type connector)

Warranty: 24 months

Description
Akyga® The AK-NB-10A power cable is the perfect solution for replacing a damaged or too short original cable. The 3 metre long cable provides easy access to even the most remote sockets, giving you the freedom to choose where you want to place your equipment. The cable is distinguished by its high-quality manufacture and robust insulation. It has a Schuko (CEE 7/7) plug on one end and an IEC C5 connector ("clover" type) on the other end for powering a variety of computers and multimedia equipment, including laptops, printers and monitors.

Description

EcoFlow AC Charging Cable

Specifications

Category code: PWA
Model: 5008004035
Color: Black
Packaging box height: 0.04 m
Packaging box length: 0.235 m
Packaging box width: 0.14 m
Number of units per shipping box: 1
Calculated volume: 0.001316 m³
Net weight: 0.3 kg
Calculated weight: 0.3 kg

Description:

Connection to a portable power station

The EcoFlow Alternator Charger XT60 Output Cable is a 1-meter-long connection cable designed to connect the EcoFlow Alternator Charger to a portable power station equipped with an XT60 input port. The cable connects to the charger’s port on the Portable Power Station and to the power station’s XT60 input.

Also compatible with power plants from other manufacturers

The cable is compatible not only with EcoFlow but also with portable power stations from other manufacturers, provided they have a compatible XT60 input port and their electrical specifications meet the charger's requirements.

Charging power up to 500 W

When using this XT60 cable, the EcoFlow Alternator Charger operates in charging mode and provides a maximum output power of up to 500 W. The actual charging power also depends on the rated parameters of the connected power station’s XT60 input.

An important requirement for 24-volt vehicles

If the vehicle's starter battery or the camper's internal battery operates at 24 V, the maximum allowable voltage at the power station's XT60 input must be greater than 48 V. Otherwise, the cable may not function properly.

A 1-meter-long cable

ELKO specifies a cable length of 1 m and a black color. This is a compact connection solution for the EcoFlow Alternator Charger system when the power generator is located near the charger.

Specifications:

Product Type: Connection Cable
Connection Type: Alternator Charger to XT60 Input
Cable Length: 1 m
Maximum Output Power: up to 500 W
Operating Mode with This Cable: Charging mode
Compatibility: EcoFlow and other manufacturers’ portable power stations with an XT60 input port
Color: black
Net weight: 1 kg
EAN: 4895251628990

Description

EcoFlow DELTA Pro Additional Battery Connection Cable.

Specifications

Category code: PWA
Packaging box height: 0.045 m
Packaging box length: 0.355 m
Packaging box width: 0.205 m
Product type:
Cable Cable length: 0.75 m
Number of units per shipping box: 1
Estimated volume: 0.003275 m³
Net weight: 0.85 kg
Estimated weight: 0.858 kg

Description

EcoFlow PowerStream microinverter connection cable to the Delta Pro power station.

Specifications

Category code: PWA
Package box height: 0.12 m
Package box length: 0.165 m
Package box width: 0.05 m
Product type:
Cable Cable length: 0.5 m
Number of units per shipping box: 1
Estimated volume: 0.00099 m³
Net weight: 0.35 kg
Estimated weight: 0.358 kg

Description:

Connection to the EcoFlow Smart Home Panel

The EcoFlow Infinity Cable is designed to connect the EcoFlow DELTA Pro portable power station to the EcoFlow Smart Home Panel. The cable ensures easy integration of the DELTA Pro into your home’s backup power system. ELKO product ID 1398181 refers specifically to the EcoFlow Infinity Cable.

Quick Disconnection of the DELTA Pro

The Infinity Cable design allows the DELTA Pro to be quickly disconnected from the Smart Home Panel if the power station needs to be used elsewhere or moved for off-grid power supply outside the home.

Smart Energy Management

When the DELTA Pro is connected to the Smart Home Panel via an Infinity cable, you can use the EcoFlow app to manage your home’s backup power system, plan your electricity usage, and set charging times.

Charging the DELTA Pro from the electrical grid

The connection to the Smart Home Panel allows the DELTA Pro to be charged directly from the home's electrical grid. Thus, the Infinity cable serves not only to supply power to the home's backup system, but also to charge the power station.

A 2-meter-long high-current cable

This particular cable is 2 m long, with a rated voltage of 300 V and a rated current of 30 A. The cable is black and is designed specifically for the EcoFlow DELTA Pro and Smart Home Panel system.

Specifications:

Product Type: Infinity Connection Cable
Application: For connecting the EcoFlow DELTA Pro to the Smart Home Panel
Cable Length: 2 m
Rated Voltage: 300 V
Rated current: 30 A
Color: black
Compatibility: EcoFlow DELTA Pro, EcoFlow Smart Home Panel
Net weight: 1.1 kg
Package width: 20.5 cm
Package depth: 36 cm
Package height: 5.5 cm
Package weight: 1.126 kg
Package volume: 0.004059 m³
Quantity per shipping package: 1 pc.
EAN: 4897082668091

Product Specifications

Category code: PWA
Product type: cable
Cable length: 1.5 m
Box height: 0.055 m
Box length: 0.25 m
Box width: 0.21 m
Number of units per pallet: 0
Number of units per box: 20
Calculated volume: 0.003128 m³
Net weight: 1.1 kg
Calculated weight: 1.16 kg

Description: EcoFlow MM100

Description:

Connecting Solar Panels to the EcoFlow Power Hub

The EcoFlow Power Hub Solar Charge Cable is a 6-meter-long cable designed to connect photovoltaic solar panels to the EcoFlow Power Hub. It allows the Power Hub system to receive electrical energy from solar panels and is designed for installation with the EcoFlow Power Kit system.

6-meter cable length

The cable is 6 meters long, providing more flexibility in positioning solar panels relative to the EcoFlow Power Hub. This is particularly useful for installations in vehicles, RVs, and other off-grid power systems.

Durable and compact design

The cable is designed for long-term use and has a relatively slim profile, which helps minimize the space required for installation.

For the EcoFlow Power Hub system

This is not a standard XT60i cable, nor is it a Sharkoon product. It is specifically the EcoFlow Power Hub Solar Charge Cable 6m, with EAN 4895251602723.

Specifications:
Product Type: Solar panel charging cable
Application: Connecting solar panels to the EcoFlow Power Hub
Cable Length: 6 m
Color: Black
Manufacturer Code: 5008004052
Product Designation: LPV-B-6M
EAN code: 4895251602723

Description:

Connecting the EcoFlow PowerStream Microinverter to the Power Grid

The EcoFlow BKW-AC cable is designed to connect the EcoFlow PowerStream microinverter to the home's electrical grid. The cable provides an AC connection between the microinverter and the electrical grid so that the solar energy generated by the PowerStream system can be used to power household appliances. EcoFlow officially states that the BKW-AC cable is specifically designed to connect the PowerStream Microinverter to the electrical grid.

3 meters long

This particular version is equipped with a 3-meter-long cable, which provides sufficient installation flexibility when positioning the PowerStream microinverter in a suitable location relative to the electrical outlet. ELKO product ID 1397896 corresponds to the EcoFlow 3-meter AC cable with EAN 4895251607698.

Genuine EcoFlow PowerStream accessory

The cable is designed for the PowerStream system and provides a proper connection to the microinverter's AC output port. The PowerStream microinverter converts the direct current from the solar panels and the connected energy storage system into alternating current compatible with the power grid, while the BKW-AC cable provides the connection to the power grid.

Secure ground connection

The EcoFlow PowerStream documentation states that the BKW-AC cable has an integrated ground conductor; therefore, when using a standard BKW-AC cable, the microinverter is grounded through this connection.

Designed specifically for network connection

Although the manufacturer classifies this product as an AC Charging Cable, its function within the PowerStream system is to connect the microinverter to the electrical grid. EcoFlow offers this BKW-AC cable in 3 m, 5 m, and 15 m lengths; ELKO product ID 1397896 is the 3 m version.

Specifications:
Product Type: AC grid connection cable
Cable Type: BKW-AC
Application: For connecting the EcoFlow PowerStream microinverter to the electrical grid
Cable Length: 3 m
Compatibility: EcoFlow PowerStream Microinverter
Color: black
Connector type at one end: straight
Connector type at the other end: angled
Quantity per package: 1 pc.
Net weight: 0.42 kg
Package width: 8.5 cm
Package length: 26.5 cm
Package height: 5 cm
Package volume: 0.0011263 m³
EAN: 4895251607698

Description:

Connecting the EcoFlow PowerStream Microinverter to the Power Grid

The EcoFlow BKW-AC cable is designed to connect the EcoFlow PowerStream microinverter to the electrical grid. It provides an AC connection between the PowerStream system and the home’s electrical grid, allowing the solar energy generated by the microinverter to be used to power household appliances.

5 meters in length

This particular version of the cable is 5 m long, which provides greater installation flexibility in situations where the microinverter is located farther from the utility grid connection point. The ELKO product data for this SKU specifies a cable length of exactly 5 m.

Genuine EcoFlow PowerStream accessory

The cable is designed for use with the EcoFlow PowerStream Microinverter system, ensuring a proper and reliable connection. EcoFlow refers to this product as the BKW-AC cable, which is intended for connecting the PowerStream microinverter to the electrical grid.

Black, compact design

The cable is black and has straight connectors on both ends. It is suitable for installing the PowerStream balcony solar power system in homes and other compatible installations.

Specifications:
Product Type: AC grid connection cable
Cable Type: BKW-AC
Application: For connecting the EcoFlow PowerStream microinverter to the power grid
Cable Length: 5 m
Compatibility: EcoFlow PowerStream Microinverter
Color: black
Connector type: straight on both ends
Net weight: 0.6 kg
Package weight: 0.629 kg
Package width: 8.5 cm
Package length: 35.5 cm
Package height: 5 cm
Package volume: 0.001509 m³
Quantity per shipping package: 1 piece
EAN: 4895251607704

Description:

Extremely fast charging with up to 240W

The EcoFlow RAPID Pro USB-C–USB-C cable provides up to 240W of charging power and is designed for fast charging of high-power USB-C devices. It is suitable for laptops, smartphones, power banks, cameras, portable game consoles, and other USB-C devices. ELKO product 1444385 corresponds to EcoFlow code 5021204005 and EAN 4895251645447.

USB-C to USB-C connection

Both ends of the cable have USB-C connectors. The cable supports both fast charging and data transfer, so it can be used to charge devices and transfer files.

Integrated E-Marker chip

The cable features a built-in E-Marker chip that detects the power requirements of connected devices and helps ensure proper and safe USB-C Power Delivery charging.

Durable nylon weave

The cable has a durable nylon-braided outer sheath. The reinforced connector areas are designed for regular, everyday use and help reduce the risk of cable damage from repeated bending.

Flexible and tangle-free design

The flexible construction allows the cable to be easily coiled and stored, while the tangle-free design makes it easy to use at home, in the office, and while traveling. The package also includes a silicone cable tie for easier storage.

1.8 m long

According to the manufacturer's specifications, the cable is 1.8 meters long, ensuring convenient connection of devices even when the charger or power source is not located right next to the device.

Wide compatibility with USB-C devices

EcoFlow states that it is compatible with 99% of USB-C electronic devices on the market. The cable can be used with laptops, phones, power banks, cameras, portable game consoles, and other compatible devices.

Reliable performance under various conditions

The cable is designed for use in various environmental conditions. The manufacturer specifies a normal operating temperature range of 0°C to +25°C and verified operation in an extreme range of -12°C to +37°C.

Specifications:
Product Type: USB-C Charging and Data Cable
Connection: USB-C–USB-C
Maximum Charging Power: 240W
Cable Length: 1.8 m
Material: Nylon Braid
E-Marker Chip: Yes
Data transfer: Yes
Compatibility: USB-C devices
Color: Black, Silver-Gray
ELKO net weight: 0.1 kg
Package dimensions: 140x100x30 mm
Estimated package volume: 0.00042 m³
Estimated package weight: 0.12 kg
EAN code: 4895251645447

Description:

Connecting Solar Panels to the EcoFlow Alternator Charger Plus 1000

The EcoFlow Solar Input Cable is specifically designed for the EcoFlow Alternator Charger Plus 1000. The cable allows you to connect compatible solar panels directly to the charger’s solar input, thereby adding solar charging capability to your vehicle’s power system. ELKO product ID 1463788 corresponds exactly to this 5-meter cable with EAN 4895251665988.

Additional solar charging source

Using this cable, the Alternator Charger Plus 1000 can also draw power from solar panels. In the EcoFlow system, connecting solar panels directly to the Alternator Charger Plus keeps the portable power station’s solar input free and allows for more flexible combinations of charging from the vehicle’s generator and solar power.

Up to 300 W solar power input

The EcoFlow Alternator Charger Plus 1000 supports up to 300 W of solar power input in solar charging mode. Under optimal conditions, the system can combine up to 700 W of power from the vehicle’s alternator with up to 300 W from solar panels, reaching a total charging capacity of up to 1000 W.

5 meters long for easy installation

The cable is 5 m long, providing sufficient flexibility to position the solar panels farther away from the charger and the vehicle. This is particularly useful in campers, RVs, and other mobile power systems, where solar panels need to be positioned in the optimal spot to capture sunlight.

For efficient energy transmission

The cable uses conductors with a cross-sectional area of approximately 3.31 mm², designed for efficient power transmission with reduced losses. EcoFlow notes that the cable is designed for stable and reliable operation in solar power systems.

Specifications:

Product Type: Solar Panel Input Cable
Application: For connecting solar panels to the EcoFlow Alternator Charger Plus 1000 charger
Cable Length: 5 m
Conductor Cross-Section: approximately 3.31 mm²
Supported solar power input: up to 300 W
Compatibility: EcoFlow Alternator Charger Plus 1000
Net weight: 0.5 kg
Package width: 23 cm
Package length: 30 cm
Package height: 5 cm
Package weight: 0.64 kg
Package volume: 0.00345 m³
Quantity per shipping package: 1 pc.
EAN: 4895251665988

Description:

For connecting solar panels in parallel

The EcoFlow Solar Parallel Connection Cable is a set of connection cables designed for connecting multiple solar panels in parallel to EcoFlow DELTA and RIVER series portable power stations. A parallel connection allows you to increase the solar charging current and use the energy generated by multiple panels more efficiently.

MC4 connectors

The cables are equipped with standard MC4 solar panel connectors, which ensure a secure and stable connection to compatible photovoltaic panels. Each cable is approximately 0.3 m long.

Designed for the DELTA and RIVER series

EcoFlow notes that the parallel cable is required to connect four solar panels in parallel to DELTA series power stations or two solar panels to RIVER series power stations.

Two cables included in the set

The kit includes two parallel connection cables that provide the necessary positive and negative connections between the solar panels.

A Compact Solution for a Solar Energy System

This short 0.3 m connector is designed specifically to connect panels to each other without creating unnecessarily long cable runs. This is an original EcoFlow accessory suitable for portable solar power systems and for charging EcoFlow power stations.

Specifications:

Product type: solar panel parallel connection cable
Cable length: 0.3 m
Connector type: MC4
Number of cables in the set: 2 pcs.
Color: black
Connection type: parallel
Application: for connecting solar panels in parallel
Compatibility: EcoFlow DELTA and RIVER series power stations
Net weight: 0.16 kg
Package weight: 0.209 kg
EAN: 4897082661290

🔌 A secure connection for shorter distances

This 2-meter XT60 cable is the ideal solution when you need a compact yet powerful connection between batteries, solar panels, or electrical devices.

⭐ Key Benefits

⚡ High performance (12 AWG)

• ensures a stable power supply
• reduces energy loss
• safe to use even under heavier loads

🔥 Reliable in any conditions

Operating temperature:

• ❄️ down to -50°C
• 🔥 up to +200°C

👉 suitable for both outdoor and indoor use

🧵 Premium-quality material

Silicon-coated copper provides:

• high conductivity
• corrosion protection
• resistance to oxidation
• flame-retardant properties

🔄 Flexible and easy to use

• an especially soft cable
• easy to fold and store
• doesn't get tangled

🔌 Universal Compatibility

Compatible with:

• 🔋 batteries and rechargeable batteries
• ☀️ solar panels
• 🚗 for automotive and RV systems
• ⚡ portable power stations

📊 Specifications

• 📏 Length: 2 meters (200 cm)
• 🔌 Connection: XT60 male → female
• ⚡ Cable type: 12 AWG
• 🧵 Material: silicon-coated copper
• 🌡️ Temperature: -50°C to +200°C

📦 Included in the set:

• 1x XT60 extension cable (2 m)

🚘 Ideal for:

• For compact installations
• For Cars and RVs
• Solar Energy Systems
• For DIY projects

⚡ The Perfect Combination for Solar Panels and a Power Station

This XT90-to-MC4 cable allows you to safely and efficiently connect solar panels to portable power stations (Bluetti, EcoFlow, etc.).

⭐ Key Benefits

☀️ Compatible with solar panels (MC4)

• Standard connection for solar systems
• Quick and easy connection
• stable power transmission

🔌 XT90 connection

• suitable for power station equipment
• a secure and durable connection
• high-current connection

⚡ 12 AWG thick cable

• designed for high power
• minimal energy loss
• reliable operation even under heavy loads

🌧️ Durable and suitable for outdoor use

• high-quality insulation material
• weather-resistant
• suitable for off-grid systems

📏 Available lengths

• 1 m (3 ft)
• 2 m (6.5 ft)
  👉 —choose as needed

📊 Specifications

• 🔌 Connection: XT90 (female) → MC4
• ⚡ Cable: 12 AWG (high-current)
• 📏 Length: 1 m / 2 m
• 🎨 Color: red/black
• ☀️ Applications: solar panels, power stations

🚘 Ideal for:

• To connect solar panels ☀️
• For portable charging stations ⚡
• For camping and off-grid systems 🏕️
• Backup Power Solutions

📦 Included in the set:

• 1x XT90 → MC4 cable

🔥 Why choose this cable?

👉 Reliable connection for solar systems
👉 Suitable for high power
👉 Universal compatibility

🛒 Order now!

A simple way to connect solar power to your power station.

👉 Click “Add to Cart” and make the most of solar energy! ☀️⚡

🔌 A stable connection in any situation

This XT60 extension cable is designed to provide a safe and stable power supply to your devices—from cars to solar panels and portable power stations.

⭐ Key Benefits

⚡ High Performance and Safety

A 12 AWG wire provides:

• a steady current
• less resistance
• safer use

🔥 Durable in extreme conditions

Operating temperatures:

• ❄️ down to -50°C
• 🔥 up to +200°C

👉 Perfect for both cold and hot weather

🧵 Premium material

Made of silicone-coated copper:

• high conductivity
• corrosion resistance
• oxidation protection
• flame-retardant material

🔄 Flexible and easy to use

Extra-soft cable:

• easily bendable
• easy to store
• doesn't get tangled

🔌 Universal compatibility

Compatible with:

• 🔋 batteries
• ☀️ solar panels
• 🚗 for automotive and RV systems
• ⚡ portable power stations

📊 Specifications

• 📏 Length: 3 meters (300 cm)
• 🔌 Connection: XT60 (male to female)
• ⚡ Cable type: 12 AWG
• 🧵 Material: silicon-coated copper
• 🌡️ Operating temperature: -50°C to +200°C

📦 Included in the set:

• 1x XT60 extension cable (3 m)

🚘 Ideal for:

• Solar Panel Systems
• For connecting batteries
• Cars / RVs
• For DIY projects

🔥 Why choose this cable?

It combines power, security, and flexibility, making it a reliable solution for both professionals and everyday users.

⚡ Fast and reliable connectivity for your devices

This XT60 → DC 5.5×2.1 cable is the ideal solution for connecting batteries to various devices—it’s compact, durable, and easy to use.

⭐ Key Benefits

🔌 Universal Compatibility

Suitable for:

• FPV displays
• solar panels
• portable power stations
• for motorcycles and cars

👨🔧 The set includes both connectors (Mom + Dad)

• XT60 male (dad) → DC 5.5×2.1 male
  

👉 Complete set—ready to use without any additional purchases

📏 Compact size

• Length: 0.3 meters
• Ideal for short connections
• Easy to carry

⚡ High-quality materials

• pure copper wire (20 AWG)
• stable power supply
• long service life

🔄 Easy to use

• easy to connect and disconnect
• “plug & play”
• without tools

📊 Specifications

• 📏 Length: 0.3 m
• ⚡ Cable: 20 AWG (0.5 mm²)
• 🧵 Material: pure copper
• 🔌 Connections: XT60 ↔ DC 5.5×2.1 (male + female)

⚡ Maximum flexibility for connections

This 6-meter XT60 extension cable (12 AWG) allows you to conveniently connect solar panels, batteries, and portable charging stations even over longer distances.

⭐ Key Benefits

📏 6 meters – long operating range

• Perfect for solar panels ☀️
• Place the panel in the optimal location
• more flexibility in installation

⚡ 12 AWG cable

• designed for high power
• minimal energy loss
• stable power transmission

🔌 XT60 connectors (male + female)

• universal standard
• secure and stable connection
• quick connection

🔥 High quality

• tinned copper wires
• low resistance
• reliable performance

🌧️ Durable design

• PVC/nylon insulation
• wear- and weather-resistant
• suitable for outdoor use

📊 Specifications

• 🔌 Connection: XT60 male → XT60 female
• ⚡ Cable: 12 AWG
• 📏 Length: 6 meters (20 ft)
• ⚡ Voltage: up to 300 V
• 🎨 Color: red/black
• ☀️ Applications: solar panels, power stations, batteries

🔋 Compatibility:

• EcoFlow
• Bluetti
• ALLPOWERS
• Anker SOLIX
• DJI
  (and other devices with an XT60 connection)

🚘 Ideal for:

• To connect solar panels ☀️
• Power plant systems ⚡
• For camping and off-grid living 🏕️
• DIY Energy Projects

📦 Included in the set:

• 1x XT60 extension cable (6 m)

🔥 Why choose this cable?

👉 longer range without power loss
👉 secure and versatile connection
👉 suitable for professional use

🛒 Order now!

Arrange your equipment freely and efficiently.

👉 Click “Add to Cart” and connect without limits! ⚡

⚡ A fast and secure connection for any battery

This XT60-to-alligator clip cable (12 AWG) is the ideal solution for connecting batteries to portable charging stations, cars, or other power sources.

⭐ Key Benefits

🔌 Versatile applications

• car and motorcycle batteries
• portable charging stations
• solar energy systems
• For DIY projects

⚡ 12 AWG thick cable

• designed for high current
• stable and reliable energy transmission
• minimal losses

🔒 XT60 connector

• secure and stable connection
• A popular standard for power station equipment
• easy connection

🐊 Crocodile Clamps (Strong Grip)

• is firmly attached to the battery
• does not slip or come loose
• ease of use

🧵 Flexible and durable

• high-quality insulation material
• easily bendable
• long-lasting

📊 Specifications

• 🔌 Connection: XT60 (female)
• 🐊 Clamps: crocodile-type
• ⚡ Cable: 12 AWG
• 📏 Length: 1 m (3 ft)
• 🎨 Color: red/black
• 🔋 Applications: batteries, cars, power stations

🚘 Ideal for:

• For connecting car batteries 🚗
• For use with the Power Station ⚡
• Solar systems ☀️
• For emergencies

📦 Included in the set:

• 1x XT60-to-alligator clip cable

🔥 Why choose this cable?

👉 secure connection
👉 high-current support
👉 universal compatibility

🛒 Order now!

A simple solution for fast and secure connectivity.

👉 Click “Add to Cart” and enjoy it hassle-free! ⚡

Description

Get Set Kit:
Power Hub – 1
Power Hub Cable Kit – 1
Power Hub Mounting Kit – 2
RJ-45 CAN bus terminator – 2
Any battery configuration

Specifications

Category code: PWA
Packaging box height: 0.35 m
Packaging box length: 0.575 m
Packaging box width: 0.395 m
Number of units per shipping box: 1
Estimated volume: 0.07949 m³
Net weight: 23 kg
Estimated weight: 23.9 kg

Description:

Charging the EcoFlow DELTA Pro at electric vehicle charging stations

The EcoFlow EV X-Stream Adapter is designed to charge the EcoFlow DELTA Pro portable power station from Level 2 AC electric vehicle charging stations. It expands the DELTA Pro’s charging capabilities, allowing it to be used at both public and private EV charging stations. ELKO code 1381137 corresponds to EcoFlow product 5004701003.

Extremely fast charging up to 3,400 W

The adapter provides a maximum charging power of up to 3,400 W. The manufacturer states that, when used with a compatible EV charging station, the EcoFlow DELTA Pro can be fully charged in approximately 1.7 hours.

Type 2 Mennekes connector

The European version uses a Type 2 (Mennekes) connector, which is widely used at AC electric vehicle charging stations in Europe. The Type 2 connector is also specifically mentioned in the description of ELKO product 1381137.

100–240 V AC operating voltage

The adapter's input and output voltage range is 100–240 V AC at a frequency of 50/60 Hz, while the maximum input/output power is 3,400 W.

Designed for the EcoFlow DELTA Pro

This adapter is designed specifically for the EcoFlow DELTA Pro power station. It provides a connection between the DELTA Pro and a compatible AC charging station for electric vehicles.

Compact and lightweight

The adapter weighs approximately 0.3 kg. ELKO specifies the package dimensions as 60 x 70 x 170 mm, making the adapter easy to store and transport along with the power station.

Package Contents

The set includes an EcoFlow EV X-Stream adapter and a user manual.

Specifications:
Product Type: EV Charging Adapter
Compatibility: EcoFlow DELTA Pro
Connector Type: Type 2 Mennekes
Input/Output Voltage: 100–240V AC
Frequency: 50/60Hz
Maximum Input/output power: 3,400 W
Full DELTA Pro charging time: approximately 1.7 hours
Net weight: 0.3 kg
Package dimensions: 60x70x170 mm
Package contents: EV X-Stream adapter, user manual

Description:

EcoFlow Solar Panel Extension Cable

The EcoFlow Solar Extension Cable is a 3-meter extension cable designed to extend the connection between solar panels. It extends the EcoFlow Solar XT60’s 3.5-meter solar panel cable by an additional 3 meters, allowing for more flexible placement of solar panels and the portable power station.

To make it easier to place the power plant in the shade

The extra cable length allows you to place the EcoFlow portable power station in the shade or another sheltered location while the solar panels are in direct sunlight. This makes it easier to set up the solar power system and reduces the need to place the power station right next to the panels.

MC4 connectors

The cable is equipped with MC4 connectors, which are widely used in solar power systems. In the ELKO specifications, it is listed as a 3-meter solar panel cable with Solar/MC4 connectors.

The set includes two cables

The package includes two EcoFlow Solar Extension Cables, designed to extend the positive and negative connections of the solar panel.

Specifications:

Product Type: Solar Panel Extension Cable
Cable Length: 3 m
Connectors: Solar / MC4
Number of Cables in Set: 2 pcs.
Net weight: 0.5 kg
Package weight: 0.53 kg
Package width: 14 cm
Package depth: 23 cm
Package height: 4 cm
Package volume: 0.001288 m³
Quantity per shipping package: 1 pc.
EAN: 4897082661832

Description:

Smart 12V and 24V Car Battery Charger

The EcoFlow Smart Auto Battery Charger is a compact charger and battery maintainer designed for 12V and 24V vehicle batteries. The EAN code 4897082667155 listed for ELKO product 1406826 corresponds to the EcoFlow model MA001-IN.

Works with EcoFlow RIVER and DELTA power stations

The charger is designed for use with compatible EcoFlow RIVER and DELTA series portable power stations. It allows you to charge or maintain your vehicle’s battery even in places where a standard power grid is not available.

Support for 12V and 24V batteries

The device has a switchable 12V/24V operating mode, making it suitable for various passenger cars, SUVs, motorcycles, trucks, and other vehicles equipped with a battery of the appropriate voltage.

Smart Automatic Charging Control

The charger uses intelligent multi-stage charging control, which automatically adjusts the voltage and current to the battery's charging process. This allows the device to be used both for charging a discharged battery and for regular battery maintenance.

Protection Against Incorrect Polarity

If the battery terminals are connected in reverse, the protection system stops charging and indicates the incorrect connection with a red indicator light. The device also features protection against short circuits, overcurrent, overvoltage, and overheating.

LED Status Indicators

The built-in LED indicators allow you to monitor the connection, charging, and warning statuses, providing clear information about the battery charging process.

Compact and lightweight

The device measures just 128x72x26 mm and weighs 103 g. Its compact design makes it easy to store the charger in a vehicle and use it as needed.

XT60 connector

The charger output uses an XT60 connector. The kit includes an XT60 cable with battery terminals designed for connection to the vehicle's battery.

Package Contents

The set includes an EcoFlow Smart Auto Battery Charger and an XT60 cable with battery terminals.

Specifications:
Product Type: Smart Car Battery Charger and Maintainer
Supported Battery Voltage: 12/24V
12V Input Voltage: 11–15V DC
Maximum input current: 7.25A
Output voltage: 14.2V or 28.2V DC
Output current at 14.2V: 6.2A
Output current at 28.2V: 3.2A
Output connector: XT60
Indicator: LED
Reverse polarity protection: Yes
Compatibility: EcoFlow RIVER and DELTA series portable power stations
Color: Black
Dimensions: 128x72x26mm
Net weight: 103g
Package contents: charger, XT60 cable with battery terminals
EAN code: 4897082667155

Product Specifications

Category code: PWA
Box height: 0.075 m
Box length: 0.14 m
Box width: 0.085 m
Number of units per pallet: 0
Number of units per box: 48
Calculated volume: 0.001112 m³
Net weight: 0.15 kg
Calculated weight: 0.229 kg

Description: 16 A relay module (for a smart home panel)

Diversity is important. The smart home panel can connect up to 10 home electrical circuits for backup power, with varying current ratings depending on the connected loads.

Easy installation. After consulting with an electrician and determining the reserve loads, installing and replacing the relay modules is easy.

Replacement without affecting other circuits. Each module has two circuits and a separate overload fuse for each circuit. This means that one module can be replaced without affecting the other circuits. If a replacement is needed, the EcoFlow app and the device’s LED indicator will notify you of any potential errors.

Specifications

Dimensions: 340 × 230 × 260 mm

Weight: 1.00 kg (net weight 920 g)

Specifications

Dimensions: 455 × 240 × 260 mm

Weight: 1.58 kg (net weight 1.33 kg)

Product Specifications

Category code: PWA
Box height: 0.04 m
Box length: 0.36 m
Box width: 0.19 m
Number of units per pallet: 0
Number of units per box: 9
Calculated volume: 0.003541 m³
Net weight: 1.5 kg
Calculated weight: 1.86 kg

Description: Mounting strap for power station

Product Specifications

Category code: PWA
Box height: 0.04 m
Box length: 0.515 m
Box width: 0.19 m
Number of units per pallet: 0
Number of units per box: 9
Calculated volume: 0.004811 m³
Net weight: 2 kg
Calculated weight: 2.47 kg

Description: Mounting strap for power station