Chemicals for machinery care

Wheel and tire care/cleaning kit with a microfiber cloth. The kit includes:

4AUTOMOTIVE IRON-EX 500 ml - Wheel Cleaner and De-Ironizer

4AUTOMOTIVE FRESH TYRE 500ml - Tire Care Product

Microfiber Towel

IRON-EX is a premium solution for safely removing iron particles from automotive surfaces, including wheels, tires, paint, and clear coat. Dirt and iron particles from brakes penetrate deep into the paint, creating corrosive compounds that cause premature corrosion. IRON-EX’s unique combination of ingredients ensures deep and safe cleaning, preventing premature corrosion. Acid-free formula.

Instructions for Use:

Shake the bottle well before use, and thoroughly treat the surface to be cleaned with IRON-EX.
Allow the product to act for 2–4 minutes.
Rinse thoroughly with water using high-pressure washing.
Dry the surface.
Avoid using IRON-EX on hot surfaces or in direct sunlight.
Avoid using on anodized, unknown-finish, and fabric surfaces.
Before cleaning, it is recommended to test the product on a small, inconspicuous area.

Safety Information:

Signal word: CAUTION! Contains: ammonium mercaptoacetate.

Hazard symbols:

H302 Harmful if swallowed. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction.

Safety requirement symbols:

P280 Wear protective gloves and eye/face protection. P261 Avoid inhaling dust/fumes/gas/smoke/vapors/aerosols. P333+P313 If skin irritation or a rash occurs: seek medical attention. P337+P313 If eye irritation persists: seek medical attention. P264 After use . . . wash thoroughly. P362+P364 Remove contaminated clothing and wash before reuse.

FRESH TYRE is a quick-application tire care product that is easy to apply to dry tire sidewalls, giving them a perfectly satin finish. The improved formula ensures a long-lasting “like-new” look for your tires.

Instructions for Use:

Clean the tires of dirt and other debris using TYRE & WHEEL CLEANER.
Apply FRESH TIRE evenly to the dry sidewalls of the tires using a special tire applicator or a microfiber cloth.
Allow the product to dry for 30 minutes.
Before use, it is recommended to test the product on a small, inconspicuous area.

Car interior cleaning kit with a microfiber cloth. The kit includes:

4AUTOMOTIVE FAB:ULOUS 4-in-1 Car Interior Cleaner

4AUTOMOTIVE Screen Clean

Microfiber Towel

4AUTOMOTIVE FAB:ULOUS 4-in-1 Car Interior Cleaner, pH-neutral, for fabric upholstery, Alcantara, and leather, odor-neutralizing, ready to use, 500 ml

Professional 4-in-1 Car Interior Cleaner

4AUTOMOTIVE FAB:ULOUS is a professional-grade car interior cleaner designed for the regular maintenance of various interior surfaces. The link provided shows the 500 ml ready-to-use version with a spray nozzle. The product code is RIX108052-05SP, EAN 4751047061283.

Suitable for fabric upholstery, Alcantara, and leather

This product is designed for cleaning car fabric upholstery, Alcantara, and leather surfaces. Using a single product on various interior materials simplifies daily interior care and reduces the need to use a separate cleaning product for each surface.

pH-balanced formula

FAB:ULOUS is a pH-balanced interior cleaning solution. This formula is designed for gentle cleaning of various car interior materials and is suitable for regular interior maintenance when used according to the instructions.

Effective removal of dirt and stains

This product helps remove everyday dirt, stains, fingerprints, and greasy residue from the surfaces inside your car. It leaves no sticky residue after cleaning, helping to maintain a neat and clean appearance.

Odor-neutralizing system

The FAB:ULOUS formula includes an odor-neutralizing system that helps reduce unpleasant odors in the car’s interior during cleaning. This is especially useful for cleaning fabrics and other porous interior materials.

Ready for immediate use

This is not a concentrated version, and the product does not need to be diluted with water before use. The 500-ml package is ready for immediate use with a spray bottle. The manufacturer, FAB:ULOUS, offers this product in 500-ml and 1-liter spray bottles.

Easy to use

Apply the product directly to the surface to be cleaned or to a microfiber cloth. Clean the surface as needed, then wipe it dry with a dry cloth or microfiber towel. Do not allow the product to dry on the surface.

Inspection Before Use

Before using the product on the entire surface, it is recommended that you first test it on a small, inconspicuous area to ensure that the specific material is compatible with the cleaning product.

Colorless composition

The manufacturer, FAB:ULOUS, describes this ready-to-use cleaning product as a colorless liquid with a characteristic scent.

500 ml package

For the specific product variant listed, the package volume is 500 ml. On the Detailingmania website, this version is listed under code RIX108052-05SP and EAN 4751047061283.

Specifications:
Product type: car interior cleaner
Product line: FAB:ULOUS
Formula: 4-in-1
Usage: ready to use
pH: balanced
Suitable for surfaces: fabric upholstery, Alcantara, leather
Odor-neutralizing system: Yes
Color: Colorless
Scent: Product-specific
Packaging: Bottle with spray
Volume: 500ml
EAN code: 4751047061283

4AUTOMOTIVE Screen Clean Monitor and Screen Cleaner, 250 ml, antistatic

An effective cleaner for monitors and screens

4AUTOMOTIVE Screen Clean is a ready-to-use cleaning solution for maintaining various monitors and screens. It is designed for plasma, LCD, and LED screens, laptop displays, touchscreens, tablets, and smartphones. It can also be used to clean plastic surfaces.

Removes dirt and fingerprints

This product effectively removes dust, dirt, greasy residue, insect remains, and various stains, including fingerprints. It leaves no streaks after cleaning, helping to keep the screen surface clean and visually flawless.

Antistatic effect

Screen Clean contains an effective antistatic agent that helps repel dust and dirt and reduces their re-accumulation on the cleaned surface.

Suitable for various surfaces of electronic devices

This product is suitable for use on car multimedia and navigation screens, as well as on consumer electronics displays, computer monitors, tablets, and phones. It is also suitable for cleaning plastic parts. 

Safety Information

According to the product safety data sheet, Screen Clean is intended for use in cleaning screens. The product is not classified as a hazardous mixture under the CLP Regulation.

Specifications:
Product Type: Monitor and Screen Cleaner
Application: Monitors, LCD and LED screens, plasma screens, touchscreens, laptop displays, tablets, cell phones, and plastic surfaces
Volume: 500 ml
Packaging: bottle with spray nozzle
Effect: cleaning, antistatic

Car interior cleaning and impregnation set, complete with accessories. The kit includes-

READY INTERIOR CLEANER 250ML, DETURNER INTERIOR DRESSING 250ML, BRUSH, APPLICATOR, MICROFIBER

Ready-made and effective means for cleaning such interior elements as: plastic, vinyl, upholstery and even leather. It has antibacterial properties. Its neutral pH level and no harmful substances make it safe for all surfaces. This will allow you to clean dirt, dust, grease and impregnation preparation residues in one microfiber pass. You can use a brush or brush to remove stubborn dirt. Prepare surfaces for dressing. It has a pleasant, delicate aroma that is not suffocating.

It nourishes all surfaces inside the car such as plastic, vinyl and rubber. Its main task is to improve color and impregnated plastic elements. It does not contain solvents, and the formula is based on natural ingredients, thanks to which all surfaces regain their former moisture and color, leaving a satin effect. Thanks to UV filters, it creates a protective and antistatic layer, reducing the adhesion of dirt. It leaves a pleasant smell inside.

PREWASH (concentrate) is a high-quality, highly concentrated foam for pre-washing cars. The product dissolves even in cold water—formulated for optimal performance. Effectively dissolves road grime. Safe for most non-absorbent car surfaces. The ideal solution for professionals and individual users.

Instructions for Use:

Concentrated. Dilution: foam generators 1:80–1:150, foam guns 100 ml–200 ml per 1 liter of clean water, dosing systems 1.0–2.0%.
Apply the solution to the surface to be cleaned, let the product sit for 1–2 minutes, then rinse with a high-pressure water gun.
Do not allow the product to dry on the surface.
Avoid using PREWASH on hot surfaces or in direct sunlight.

Safety Information:

Signal word: DANGER! Contains: SODIUM HYDROXIDE; Dodecylbenzenesulfonic acid; Sulfonic acids, C14-16 (even-numbered) -alkane hydroxy and C14-16 (even-numbered) -alkene, sodium salts.

Hazard symbols:

H314 Causes severe skin burns and eye damage. 

Safety requirement symbols:

P260 Do not inhale dust / fumes / gas / smoke / vapors / spray. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P303+P361+P353 IF ON SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or take a shower]. P280 Wear protective gloves / clothing and eye / face protection. P310 Immediately contact a POISON CONTROL CENTER / doctor / . . . P264 After use . . . wash thoroughly. P501 Dispose of contents/container in accordance with local regulations. 

Composition in accordance with Regulation (EU) No. 648/2004, as currently in force: 5–15% anionic surfactants.

KiurLab Bubble Fruit pH neitrāls auto šampūns, 500ml, greipfrūtu aromāts

EAN: 5904988127191
Piegādātāja kods: KL1401081201
Pašreizējais ledakcijas.lv SKU: KL140108120

Apraksts

KiurLab Bubble Fruit ir koncentrēts pH neitrāls auto šampūns, kas paredzēts efektīvai un saudzīgai automašīnas mazgāšanai ar rokām. Tas palīdz no virsbūves noņemt ikdienas netīrumus, eļļas un taukainus nosēdumus, vienlaikus saudzējot apstrādāto virsmu.

Neitrāls pH

Neitrālā formula ir droša automašīnas lakai, aizsargplēvēm, vaskiem un keramiskajiem pārklājumiem. Šampūns nebojā iepriekš uzklātus virsbūves aizsarglīdzekļus, tāpēc piemērots regulārai auto kopšanai.

Koncentrēta un ekonomiska formula

Bubble Fruit ir koncentrēts līdzeklis, tādēļ vienai mazgāšanas reizei nepieciešams neliels šampūna daudzums. Ieteicamais daudzums ir 30–40 ml uz 10 l silta ūdens.

Efektīva netīrumu noņemšana

Aktīvās mazgājošās vielas palīdz atdalīt un izkliedēt netīrumus ūdenī, padarot to noskalošanu vieglāku. Šampūns labi puto un ir piemērots lietošanai ar auto mazgāšanas cimdu vai mīkstu sūkli.

Drošs aizsargpārklājumiem

Šampūnu var izmantot automašīnām ar vasku, keramisko pārklājumu vai aizsargplēvi, jo tā pH neitrālā formula nebojā aizsargkārtu.

Greipfrūtu aromāts

Patīkamais greipfrūtu aromāts padara automašīnas mazgāšanu patīkamāku.

Lietošana

Pirms mazgāšanas noskalojiet no automašīnas smiltis, dubļus un citus vaļīgus netīrumus.

Pirms lietošanas pudeli rūpīgi sakratiet.

Pievienojiet 30–40 ml šampūna 10 l silta ūdens.

Mazgājiet automašīnu no augšas uz leju ar mīkstu mazgāšanas cimdu vai sūkli. Ieteicama divu spaiņu metode – viens spainis ar šampūna šķīdumu, otrs ar tīru ūdeni cimda skalošanai.

Neizmantojiet līdzekli uz sakarsušas virsmas vai tiešos saules staros. Nepieļaujiet šampūna nožūšanu uz virsbūves.

Pēc mazgāšanas rūpīgi noskalojiet automašīnu ar tīru ūdeni un nosusiniet ar mikrošķiedras dvieli.

Specifikācija
Ražotājs: KiurLab
Produkts: Bubble Fruit Shampoo
Preces tips: auto šampūns
Tilpums: 500 ml
EAN: 5904988127191
Piegādātāja kods: KL1401081201
pH: neitrāls
Forma: koncentrēts šķidrums
Paredzēts: automašīnu mazgāšanai ar rokām
Piemērots virsmām: auto laka, aizsargplēves, vasks, keramiskie pārklājumi
Ieteicamā deva: 30–40 ml uz 10 l ūdens
Mazgāšanas metode: ar cimdu vai sūkli, ieteicama divu spaiņu metode
Aromāts: greipfrūtu
UFI: 9G10-J0ND-K00G-2YF6

KiurLab Zero – Wipe Out Degreaser

KiurLab Zero is a modern, gentle, non-aggressive Wipe Out surface degreaser designed for perfect paint preparation before applying protective coatings, waxes, and sealants . The precisely engineered formula effectively removes oils, polishing compound residue, silicones, and other contaminants, leaving the surface flawlessly clean, degreased, and ready for protection. 

This product stands out for its ease of use and pleasant scent, ensuring fast, effective, and safe cleaning—even on sensitive lacquered surfaces.

What is KiurLab Zero?

KiurLab Zero is a non-aggressive product designed to remove all residues from the polishing process. It effectively removes greasy films, polishing compound residue, silicones, and other contaminants that can impair the adhesion of coatings or waxes.

Unlike traditional degreasers, KiurLab Zero does not dry out the paint and is completely safe for painted surfaces, plastic, and chrome. Its balanced formula ensures quick evaporation without streaks or residue, while its pleasant scent enhances comfort during use.

What makes KiurLab Zero stand out?

• Effective degreasing—removes oils, polishing compounds, silicones, and other contaminants.

• Gentle formula—safe for all types of nail polish.

• No streaks—a clean, even surface, ready for protection.

• High level of comfort during use—easy to apply and quick-drying.

• A pleasant scent—enhances the user experience.

• Ideal for use before applying coatings, waxes, and the sealant .

How do you use KiurLab Zero?

1. Do not use in direct sunlight—make sure the surface is cool.

2. Shake the bottle before use.

3. Spray a small amount onto a microfiber cloth or directly onto the surface (treat one section at a time).

4. Spread the product evenly with a microfiber cloth.

5. Wipe it down with another dry microfiber cloth.

6. Do not allow the product to dry on the surface.

7. If necessary, repeat the process.

Who is KiurLab Zero intended for?

Ideal for:

• for professional detailers and car care studios;

• paint shops and body repair shops;

• car washes that prepare surfaces for waxing;

• for car enthusiasts who want a perfectly prepared surface for protection.

Professional Tips

• Use two microfiber cloths—one for spreading, the other for wiping.

• Use after each polishing step to check the actual results of the correction.

• Before applying the coating, make sure the surface is completely clean and dry.

An effective and efficient product for use as a car shampoo or active acidic pH foam, ideal for the care of lacquers protected by coatings and waxes. It softens dirt and effectively dissolves atmospheric and lime deposits. It perfectly cleans the pores of the coatings and allows the hydrophobic properties to remain longer.

1. As a foam, use a dilution of 1:8 to 1:14 in the foam sprayer under the high pressure washer, 30 ml per 1 liter of water in the hand foam sprayer.

2. As a shampoo, prepare a 1:200 solution (50 ml per 10 l of water) and lather with a strong jet of water.

3.Wash the car from top to bottom with a soft mitt. Rinse and dry the car thoroughly.

Deturner Xpert line PREPARE Surface preparation agent
Prepare the surface for applying wax, ceramic or other coating by cleaning it completely. Correctly selected additives, including alcohols, will remove residual polishing pastes, greases, waxes and silicones.
Recommended for checking the final quality also on soft varnishes. Increases the bond between the surface and any type of coating.

Usage:

Spray thoroughly on the microfiber and then spread over the entire surface you want to clean.
Wait and then wipe off the excess product with dirt with an appropriate microfibre.
The product can also be sprayed directly on the surface and the excess can be wiped off with an appropriate microfiber.

An effective and efficient product for use as a car shampoo or active acidic pH foam, ideal for the care of lacquers protected by coatings and waxes. It softens dirt and effectively dissolves atmospheric and lime deposits. It perfectly cleans the pores of the coatings and allows the hydrophobic properties to remain longer.

1. As a foam, use a dilution of 1:8 to 1:14 in the foam sprayer under the high pressure washer, 30 ml per 1 liter of water in the hand foam sprayer.

2. As a shampoo, prepare a 1:200 solution (50 ml per 10 l of water) and lather with a strong jet of water.

3.Wash the car from top to bottom with a soft mitt. Rinse and dry the car thoroughly.

An alkaline product for pre-washing the car body and wheels. It removes road grime that builds up while driving and prepares the car body for shampooing. It is a safe product for both the car body and the wheels. The product is suitable for cars with protective coatings and PPF films.

It is a highly concentrated product, diluted 1:10 - 1:20 and applied by spraying. After application, allow to work for 2 - 3 minutes and then rinse thoroughly with water.

Deturner Xpert line PREPARE Surface preparation agent
Prepare the surface for applying wax, ceramic or other coating by cleaning it completely. Correctly selected additives, including alcohols, will remove residual polishing pastes, greases, waxes and silicones.
Recommended for checking the final quality also on soft varnishes. Increases the bond between the surface and any type of coating.

Usage:

Spray thoroughly on the microfiber and then spread over the entire surface you want to clean.
Wait and then wipe off the excess product with dirt with an appropriate microfibre.
The product can also be sprayed directly on the surface and the excess can be wiped off with an appropriate microfiber.

Designed to enhance the vehicle's appearance and provide an additional protective layer for exterior surfaces. Improves water and dirt repellency

Hydro-Ex Pro is a highly effective water-repellent coating. An innovative, high-performance, and highly concentrated product that repels water and dirt. The ideal solution for professional car care specialists and individual users. Easy to use, it delivers immediate results and long-lasting effects.

Usage:

Spray the product evenly onto a clean, cool, and damp surface, and rinse it off immediately after application. If using the product in hot conditions, treat one body panel at a time. Important—do not let the product dry on the surface! Do not use the product in direct sunlight or on hot surfaces.

Specifications:
Volume: 0.5 liters
Density at 20 °C: 1.003 g/cm³
pH: 6.1
Color: yellowish
Odor: odorless
Brand: 4Automotive

DESIGNED TO ENHANCE THE VEHICLE'S APPEARANCE AND PROVIDE ADDITIONAL PROTECTION FOR EXTERIOR SURFACES. IMPROVES WATER AND DIRT REPELLENCE

Hydro-Ex Pro is an exceptionally effective water-repellent coating. Innovative, high-performance, and highly concentrated. The ideal solution for professional detailers and individual users. Easy to use — instant results — long-lasting effect.

Usage:

Spray the product evenly onto a clean, cool, and damp surface—rinse immediately after application. If using the product in hot conditions, treat one section at a time. IMPORTANT—do not let the product dry on the surface! Do not use the product in direct sunlight or on hot surfaces.

DENSITY at 20°C: 1.003g/cm³

pH6.1

COLOR: YELLOWISH

SCENT: UNSCENTED

KIUDINI Quick Detailer by KiurLab - a fast and reliable solution that deepens the colour tone and refreshes the look of your car

KIUDINI Quick Detailer is a professional-grade synthetic designed for users who want to improve the appearance of their car quickly and effectively. It deepens paint tone, adds shine and ensures a clean, well-groomed appearance - streak-free, residue-free and effortless. In minutes, your car will look like it has just had a professional detailing treatment.

KIUDINI Quick Detailer The effect is based on a multifunctional effect on the treated surfaces. On the one hand, QD contains a carefully selected combination of mild cleaning agents that safely remove traces of hard water and residues from previous washing stages. On the other hand, it fills in micro-scratches to form a thin, smoothing protective film. The result is improved light reflection and enhanced colour depth and intensity. An additional effect is hydrophobicity, which promotes the formation and drainage of water beads, facilitating drying and reducing the appearance of water spots.

Why use Quick Detailer?

Quick Detailer products are becoming more and more popular every year - mainly due to their high efficiency, ease of use and impressive visual results. One of the advantages of QD is its ability to visually mask minor body defects. Although it is not a permanent correction (QD does not contain abrasive particles), the visual effect is immediate and very attractive.

Using KIUDINI QD after washing the car, the intensity of the paint is highlighted and a glass gloss effect is given. A few minutes are enough to significantly improve the appearance of the car. In addition, the effect lasts up to 4-6 weeks, allowing you to enjoy excellent body condition for longer with minimum effort.

KIUDINI The benefits will be particularly appreciated by users whose vehicles are protected by waxes, films or ceramic coatings. On the one hand, QD gently removes dust and water spots, on the other hand it forms an additional protective layer against external factors. This KIUDINI is an excellent solution for extending the life of existing coatings.

The advantages of KIUDINI Quick Detailer:

• Technology that improves visual appearance
• Enhances colour depth and enriches tint
• Visual masking of micro scratches and body refresh
• Glass effect - smooth and slippery surface
• Strong hydrophobic effect - formation of water beads
• Safe for use on protective coatings and PPF films
• Quick and easy to use - only a spray bottle and microfibre cloth are required
• Immediate effect - spray on bodywork and buff to a shine
• Extra protection for the paint - protective film against dust, water spots and other external factors
• Long-lasting - the effect lasts up to 4-6 weeks
• Economical - 1 litre is enough for several full car treatments
• Highly effective - 1-2 sprays per body part
• Pleasant fragrance

How to use KIUDINI Quick Detailer by KiurLab?

Read the information on the packaging carefully before use to avoid mistakes and make the most of the product's care properties.

Recommendations before use:

• Wash and dry the car thoroughly before using QD.
• Do not use KIUDINI on hot bodywork.
• Work in the shade - avoid direct sunlight or heat sources.
• Shake bottle well before use.

Method of use:

1. Spray product onto a microfibre cloth or directly onto the bodywork (1-2 sprays per part).
2. Spread evenly in a thin layer with the cloth.
3. Smooth over the surface of the cloth with a thin layer of cloth.
4. Work over the panels to ensure an even finish.

Additional tips:

• If too much product has been applied - wipe off excess with a second, dry microfibre cloth.
• Store the product in a cool, dry place, protect from the sun.

Nano wax

A coating with an immediate hydrophobic effect, apply to a clean and damp varnish to protect and improve the gloss. The treated surface becomes slippery, which makes drying the body after washing more pleasant and faster. Also suitable for treating discs to make it easier to keep them clean for longer.

How to use:

1. Wash and rinse the car thoroughly.
2. Spray the product directly onto a wet car.
3. Rinse the product thoroughly with clean high-pressure water.
4. Do not use the product in direct sunlight, do not allow it to dry.
5. Wipe the clean water off the car with a squeegee or blow the surface.

DETURNER CERAMIC DETAILER Liquid ceramic wax

Usage:

1. Wash and dry the car according to the dithyling technology.
2. Apply the microfibre (350-400GSM) with one blow of the chemical.
3. Then 2-3 blows per panel and spread the product with microfibre.
   
4. If necessary, buff the surface with the other side of the microfibre and enjoy the glossy effect of the body.

Safety information:

Safety requirement signs:

P101 If medical advice is required, relevant information is given on the packaging or label P102 Keep away from children P103 Read the label before use P280 Use protective gloves/protective clothing/eye protection.

Detergent content: < 5% non-ionic surfactants, preservatives: (methylchloroisothiazolinone and methylisothiazolinone, bronopol); Fragrance composition: (d-limonene, eugenol); Colourants

Q² Wax - the most traditional car care product combined with modern technology and innovative packaging.

Based on fluoropolymers

Gyeon are specialists in coatings and have created an unconventional wax containing fluorine. A highly reactive coating and a guarantee of excellent results, hydrophobicity and gloss. A great product for use by enthusiasts who just want a wax, but will also impress professionals as a great, simple 'top coat' on existing ceramic coatings.

DURABLE AND EASY TO USE

Q² WAX is a wax with a beautiful shine for any colour, as well as an excellent hydrophobic (water-repellent) effect. The trump card of this wax is its ease of use, which in turn makes the process unforgettably pleasant.

Surface preparation is the most important step! Make sure the car is washed, free of iron and bitumen, and degreased for maximum results. Apply a thin, even coat of wax to a dry surface and leave it on for a minimum of 30 minutes before wiping it off. For waxing and polishing we recommend Q²M PolishWipe microfibre.

5 of 5

HYDROPHOBIC: 5 of 5

COLOUR STRENGTH: 5 of 6

Visual example of wax properties and application:

Safety information:

Signal word: DANGER! Contains.

Hazard signs:

H226 Flammable liquids and vapours. H315 Irritating to skin. H318 Causes serious eye damage. H332 Harmful by inhalation. H412 Harmful to aquatic organisms with long-lasting effects.

Indications of safety requirements:

P101 In case of medical advice, relevant information is given on the packaging or label. P102 Keep away from children. P261 Avoid inhalation of dust/vapour/gas/fumes/vapour/spray. P271 Use only outdoors or in well-ventilated areas. P273 Avoid release into the environment. P280 Use protective gloves/protective clothing/eye protectors/face protectors/hearing protectors. P305+P351+P338 IN CONTACT WITH ACID: Rinse gently with water for several minutes. Remove contact lenses if they are inserted and if this can be easily done. Continue rinsing. P310 Contact the CONTACT INFORMATION CENTRE/doctor immediately. P501 Dispose of contents/container according to local regulations. Use may form flammable or explosive vapour/air mixture.

GYEON Q ² M WETCOAT is an instant-acting, extremely easy-to-use hydrophobic coating builder. It's a ready-to-use formula that delivers great performance in a very simple and quick spray/rinse process. Despite the simple application, it provides excellent durability and chemical resistance.

GYEON Q ² M WETCOAT can only be used on a wet and cool surface, must not be used in direct sunlight. When using the product in warm or hot climates, it should be applied in sections. NOTE: GYEON Q ² M WETCOAT should be rinsed immediately without waiting for a reaction - it happens when the product is rinsed. No smoothing with a glove or towel is required.

GYEON Q ² M WETCOAT is a revolutionary inflatable protective coating that provides instant protection in minutes - simply spray and rinse. The real advantages are its hydrophobic and self-cleaning effect that appears immediately, combined with a pronounced gloss on painted surfaces.

The biggest benefit with GYEON Q ² M WETCOAT is its universal nature that allows it to be used on any exterior surface. It gives excellent self-cleaning properties not only to the paint, but also to plastic and metallic finishes, wheels or windows.

Features and Benefits:

• Easy to apply - spray on a wet surface for lasting shine and protection.
• Adds hydrophobic protection, repels water, dirt & grease.
• Safe to use on paint, plastic trim, metal, rims and glass.
• Persistence remained up to 3 months
• Used together with GYEON Q²M BATHE+ for even more durable protection

CONSUMPTION: 80 ml/car

pH RESISTANCE: 2-11

CONTACT ANGLE: >90 ⁰

_SiO2 PERCENT: <5%

DURABILITY: up to 12 weeks