Control units, measuring instruments, and switches

The wireless Cruise Light Controller is the first to control all your vehicle's lighting at the touch of a button. You get outstanding features to take your driving experience to the next level. For every driver, every day.

The Cruise Light Wireless Controller is suitable for all vehicles and can control all vehicle lighting. This is all possible thanks to the included relay box with six different output channels, totaling 700 W. 2x 150W (15A) for Cruise Light Roof bars and 4x 100W (10A) for any type of vehicle lighting.

The output channels can be controlled by wireless control or signal cable. Use the controller wirelessly with batteries (4x AAA, not included) or place it somewhere in your cab and connect the controller with the included USB cable. The relay box can withstand harsh environments, is waterproof, IP rated to IP67, and rubber seals protect the cables.

The wireless controller is colour coordinated. Nine buttons are amber, eight are white and one is blue. The amber buttons are designed for Cruise Light Roof bars and can control bar functions such as changing patterns or turning them on and off. For most functions, the button will be highlighted on the active ones and the roof bar patterns will also be displayed in the ambient LEDs. You also get buttons for confirmation in day mode, night mode and cruise light mode.

Three buttons, left, centre and right, are used for traffic information, flashing from right to left, centre and out and left to right. The blue button turns on and off all connected lights and the lights will return to the same status before switching off using the built-in memory function. Pressing for three seconds will switch on all channels.

If you want to control all lighting with a relay box, use a signal cable. The signal cable allows, for example, to connect a reversing lamp to one of the four channels and use it as a work light with wireless control. This becomes a double function. With the Cruise Light Wireless Controller and the included relay box, you'll always be ready to make your passion visible and take your driving experience to the next level. For every driver, every day.

Dimensions: 115.00 x 65.00 mm
Weight: 2.30 kg (net 2.30 kg)
Voltage: 12–24 V
Information: The Optibeam control panel is designed for, 
to speed up and simplify the installation of additional devices
 and control in various 12–24 V operating environments with a total current of up to 60 amps
 Fuses specific to the device,
 Relays or automatic switches no longer need to be installed,
 but the functions used are directly connected to the 8-channel control unit,
 which are operated using their own 8-button control switch.
Warranty (months): 12

Product specification
Dimensions: 125 × 55 mm
Weight: 2100 kg (net 1950 kg)
Voltage: 12-24 V
Current: 60 A

Information:
The Optibeam control panel is designed to facilitate the installation and control of additional devices in 12 V environments with a total power of up to 60 A. Separate fuses, relays or switches are no longer required - the functions used are connected directly to the inputs of the 8-channel control unit, which are operated by an 8-button control switch.

Product Specifications
Dimensions: 147 × 31 mm
Weight: 1,650 kg (net 1,500 kg)
Voltage: 12–24 V
Current: 60 A

Information:
The Optibeam control panel is designed to facilitate the installation and control of additional devices in various 12-volt environments with a total current capacity of up to 60 A. Separate fuses, relays, or switches are no longer necessary—the required functions are connected directly to the 4-channel control unit, which is operated via a 6-button control switch.

12-group switch panel, wireless, adjustable RGB colour brightness, multi-function toggle strobe, auxiliary control unit for cars, off-road trucks, SUVs, campers, yachts

Wireless panel, wireless control - no wiring required between switch panel and control unit. Includes a switch panel holder so you can easily remove the switch panel at any time and use it as a remote control

Rechargeable and long-lasting - approx. 14 days standby or 8 hours continuous use after a full charge (2-3 hours). With battery indicators (white) to show the remaining battery charge level, and the charge indicator turns red when it is charging and green when it is full. Type C charging cable included.

Multifunctional and customisable - adjust the device control for each switch: constant, momentary and strobe mode. 8 colour options displayed in different backlight modes.

Robust panel, improved stability: 720 W/12 V, 1440 W/24 V, maximum current: 80 A. High sensitivity and strong anti-interference capability ensure stability. IP65 waterproof. Aluminium alloy back cover with rigid metal bracket for durability and long service life. Equipped with 5 fuses to effectively protect vehicles from electrical damage.

Wiring has never been so easy - as you know, our wireless feature has saved you some wiring hassle, but that's not all. You can choose to connect it to ACC or battery as a power source, just flip the switch to ACC or battery! This flexible power supply design eliminates a lot of messy wiring.

Includes: switch panel, holder, control box, mounting brackets and accessories, 5 fuses (30A x2, 20A, 15A, 10A), 140 marking stickers, antenna and charging cable. Suitable for motorhomes, marine vehicles, cars, trucks, off-road vehicles, quad bikes, boats, yachts, caravans, etc.

Dimensions: 30,00 x 30,00 x 50,00 mm
Weight: 30g
Type: XBB PowerUnit
Plug type: 5-pin
Information: for connecting additional devices (15A + 5A) to the 1605-WK070 control kit

SKU: 1605-WK078
Info: Wireless remote control, Control additional lighting with the wireless push button. It communicates via Bluetooth with your XBB Dongle, so you don't need to connect any wires. The push button can be programmed to activate or deactivate outputs 1 and 2 of the XBB power supply. In this way, one button can have several functions

Pārslēgšanās panelis bākugunīm – slēdžu panelis bākuguņu un brīdinājuma gaismu režīmu pārslēgšanai kabīnē.

• Der: bākugunīm, brīdinājuma gaismām
• Garantija: 2 gadi
• Artikuls: 29-1536-C

Pārslēgšanās panelis bākugunīm – slēdžu panelis bākuguņu un brīdinājuma gaismu režīmu pārslēgšanai kabīnē.

• Der: bākugunīm, brīdinājuma gaismām
• Garantija: 2 gadi
• Artikuls: 29-1535

Slēdzis vadu komplektiem ar DT savienotāju un 2 m vadu – gatavs slēdzis ar Deutsch DT spraudni, ko pieslēdz Plug&Drive vai releja vadu komplektam bez lodēšanas. Montējams panelī kabīnē.

• Savienotājs: Deutsch DT
• Vada garums: 2 m
• Garantija: 2 gadi
• Artikuls: 1605-WK052

Weight: 30g (net 30g)
Type: ON-OFF
Voltage: 12V
Power: 10A
Plug Type: 3-pin open cable
Lead Length: 500mm
Details: 22mm diameter handlebar

Slēdzis ar indikatoru ROOF LIGHT 12/24 V – panelī montējams slēdzis jumta lukturu (LED bāra) ieslēgšanai ar izgaismotu simbolu un indikatoru. Standarta 20×33 mm montāžas atvere kravas auto un bezceļa auto paneļiem.

• Izmēri: 25×45 mm
• Montāžas atvere: 20×33 mm
• Spriegums: 12/24 V
• Indikators: izgaismots simbols
• Aizsardzība: IP20
• Garantija: 2 gadi
• Artikuls: PLJ15

Specifications

Weight: 90 g

Information:
Gray switch for the power-on function.

Slēdzis stroboskopa lampām 12/24 V – ieslēgšanas slēdzis brīdinājuma gaismām un stroboskopiem kabīnē, ar režīmu pārslēgšanas pogu.

• Spriegums: 12/24 V
• Der: stroboskopiem, brīdinājuma gaismām
• Garantija: 2 gadi
• Artikuls: TT.A80

Svirslēdzis darba gaismai ar simbolu – divu pozīciju slēdzis ar darba luktura simbolu kravas auto un tehnikas panelim.

• Pozīcijas: 0–1
• Simbols: darba gaisma
• Garantija: 2 gadi
• Artikuls: 29-1449-C

AUTOLINE svirslēdzis 0–1 – vienkāršs divu pozīciju slēdzis papildlukturu un citu 12/24 V patērētāju ieslēgšanai, montējams panelī.

• Pozīcijas: 0–1
• Garantija: 2 gadi
• Artikuls: 1569-30237

AUTOLINE slēdzis ON/OFF ar zilu LED apgaismojumu – kompakts slēdzis ar 12 mm montāžas atveri, stiprināms ar uzgriezni, 3 × 6,3 mm plakanās spailes. Der papildlukturu un salona apgaismojuma vadībai.

• Tips: ON/OFF
• Apgaismojums: zils LED
• Montāžas atvere: Ø12 mm
• Spailes: 3 × 6,3 mm
• Garantija: 2 gadi
• Artikuls: 1569-20127

Apaļš rocker slēdzis ON-OFF, melns – fiksējošs 2 kontaktu slēdzis Ø19,8 mm montāžas atverei, 6 A / 250 V. Der 12/24 V auto, tehnikas un salona apgaismojuma vadībai; pieejams caurspīdīgs aizsargvāciņš SW-RMCAP07.

• Tips: ON-OFF, fiksējošs, SPST
• Kontakti: 2
• Strāva: 6 A / 250 V
• Montāžas atvere: Ø19,8 mm
• Krāsa: melna
• Garantija: 2 gadi
• Artikuls: KE-RO-BL

Apaļš rocker slēdzis ON-OFF, balts – fiksējošs 2 kontaktu slēdzis Ø19,8 mm montāžas atverei, 6 A / 250 V, RoHS. Der 12/24 V auto, tehnikas un salona apgaismojuma vadībai; pieejams caurspīdīgs aizsargvāciņš SW-RMCAP07.

• Tips: ON-OFF, fiksējošs, SPST
• Kontakti: 2
• Strāva: 6 A / 250 V
• Montāžas atvere: Ø19,8 mm
• Krāsa: balta
• Garantija: 2 gadi
• Artikuls: KE-RO-W

Apaļš rocker slēdzis ON-OFF 10 A, balts – fiksējošs 2 kontaktu slēdzis Ø19,8 mm montāžas atverei, 10 A / 250 V. Jaudīgāka versija papildlukturiem un tehnikai; pieejams caurspīdīgs aizsargvāciņš SW-RMCAP07.

• Tips: ON-OFF, fiksējošs, SPST
• Kontakti: 2
• Strāva: 10 A / 250 V
• Montāžas atvere: Ø19,8 mm
• Krāsa: balta
• Garantija: 2 gadi
• Artikuls: KE-RO-W-10A

Technical data

• Dimensions: Ø20 mm
• Type: 1-0-2
• Voltage: 12-24V
• Additional information:
  • 1-0-2 function
  • Without LED
  • To be installed in a 20 mm hole
  • Flat connectors: 3x4.7 mm male

Caurspīdīgs aizsargvāciņš SW-RM sērijas apaļajiem slēdžiem – pasargā slēdzi no mitruma un netīrumiem, der KE-RO sērijas Ø19,8 mm slēdžiem.

• Der: SW-RM / KE-RO apaļajiem slēdžiem
• Materiāls: caurspīdīgs silikons
• Garantija: 2 gadi
• Artikuls: SW-RMCAP07

Details: +sensor 0-10Bar, 52mm. 1/8 NPT

Details: +sensor 40-120°C, 52mm. 1/8 NPT

Voltmetrs 16–32 V, Ø52 mm – analogs rādītājs 24 V sistēmu akumulatora sprieguma kontrolei kravas auto un tehnikā. Standarta Ø52 mm montāža panelī, izgaismota skala.

• Mērījums: spriegums 16–32 V
• Sistēma: 24 V
• Diametrs: Ø52 mm
• Garantija: 2 gadi
• Artikuls: 1704-80970

Voltmetrs 6–33 V ar LED displeju, Ø37 mm – digitāls akumulatora sprieguma rādītājs 12 un 24 V auto, kemperiem un tehnikai. Montāžas atvere 29 mm, panelis 45×63 mm, skrūvju attālums 48 mm, 2 × 6,3 mm plakanie savienotāji.

• Mērījums: spriegums 6–33 V
• Displejs: LED
• Diametrs: Ø37 mm, atvere 29 mm
• Panelis: 45×63 mm, skrūves 48 mm
• Savienotāji: 2 × 6,3 mm
• Garantija: 2 gadi
• Artikuls: 1800-031926

Voltage (DC)
Input: 10–35 V DC Output: 10–35 V DC
Power consumption (W) 12 V
Maximum power: 6 × 30 W
Power consumption (W) 24V
Maximum power: 6x 30W
IP rating 68
Housing color Black
Connection Cable
Cable length (mm) Output: 450 mm Input: 500 mm
Length (mm) 100
Depth (mm) 50
Height (mm) 17
CC (mm) 90
The strobe controller offers many great features and will take your vehicle to the next level. The strobe controller has 12 flashers, is waterproof, and comes with a 3-year warranty. The strobe controller connects to the parking lights on your work lights, which consume less than 30 W, or to running lights and other lights that you want to flash and that consume less than 30 W. The strobe controller has six output channels; connect the red (positive) wires and black (negative) wires to the lights and keep them in the same order. If you are not using all six channels, insulate the unused cable ends to prevent accidentally causing a short circuit on the PCB. If the light is already connected to ground/the chassis, connect only the red, positive wires. In the incoming power supply, you will find one red, one black, and one yellow wire. The red and black wires are connected to a button in the cabin or to a switch. The yellow wire connects to the red one to select one of the desired patterns. The patterns are dynamic / active, and it is important to connect the channels in the order in which you want the lights to flash.

USB-A 3.0 + USB-C lādētājs 12–24 V ar noņemamu stieņa kronšteinu – divi ātrās uzlādes porti 2 × 3 A / 5 V telefonam un navigācijai kravas auto, traktorā, kvadriciklā vai laivā. Vads 2 m, stiprināms pie stūres vai roktura.

• Porti: USB-A 3.0 + USB-C
• Izeja: 2 × 3 A / 5 V
• Spriegums: 12–24 V
• Vads: 2 m
• Stiprinājums: noņemams stieņa kronšteins
• Garantija: 2 gadi
• Artikuls: 1800-0346

Dimensions: 53.00 x 51.00 x 27.00 mm
Weight: 90g (net 90g)
Type: Orion-Tr 24/12-5
Voltage: 24V→12V
Power: 60 W
Current: 5 A
IP rating: IP43
Approvals: ECE R10-4, EN 60950, EN 61000-6-1/-6-2/-6-3, EN 55014-1/-2
Information: Short-circuit safe, parallel, high temperature protected, input: 18-35V, output nominal: 12.7V, output voltage tolerance: ±0.2V, rms, maximum current: 5A (cont.7A (10s @ nominal output voltage), maximum cable size 3.3 mm², efficiency 95%, no-load current <20mA, IP43 (when screw terminals installed oriented downwards), operating temperature -20°C ... +55°C, RH 95% (non-condensing), fixation: 4xM4