Battery Chargers, Jump Starters and Compressors

Powerful battery starter: this AVAPOW A68 car starter delivers up to 6000A peak current and high power. It can safely start all gas and diesel engines. Suitable for all (12 volt) cars, trucks, motorcycles, boats, RVs or tractor quads, UTVs, lawnmowers, snowmobiles, etc.

Intelligent safety protection: the battery starter operates with an intelligent jumper clamp that provides 8 safety protections to ensure its safe use. Also, a jumper clamp indicator will inform you of common malfunctions.

Portable car power supply: this car jumper is also a car power supply that is equipped with 2 USB output ports, including one for fast charging. This can save you 50% of the time when charging mobile phones, tablets, Kindles or digital cameras.

Extra bright LED light: the car battery charger starter is equipped with 3 LED light modes (Lighting/Flash/SOS) and easily changes lighting modes by toggling the power button. The extra bright light can help you start your car more easily at night, and the strobe and SOS mode can act as a lifesaver in emergency situations.

Waterproof EVA bag, easy to store and carry

Enhanced 4000A capacity — activates in 3 seconds

Regardless of the weather—whether it’s a cold winter or a hot summer—the TM28 provides up to 4,000 A of starting current to quickly jump-start a 12V battery. The device features a jump-start function, and is suitable for passenger cars, SUVs, RVs, ATVs, motorcycles, snowmobiles, and boats—all gasoline and diesel engines. It works even at temperatures as low as -20°C.

Fast and accurate tire inflation — ready in 1 minute

Even if you've never used a compressor before, the TM28 makes it easy. It delivers up to 150 PSI of pressure and offers 5 preset modes (car, bicycles, motorcycles, balls, inflatable accessories). Real-time pressure monitoring and an automatic shut-off feature prevent over-inflation. It can inflate a tire (195/65 R15) from 30 to 36 PSI in about 1 minute.

Starting a High-Performance Vehicle

The AVAPOW E5 PRO provides a maximum starting current of up to 2,000 A and is designed to start 12-volt vehicle batteries. The device is suitable for gasoline engines with a displacement of up to 7 L and diesel engines with a displacement of up to 4 L.

Wide Vehicle Compatibility

The jump starter can be used for cars, trucks, motorcycles, boats, campers, tractors, ATVs, lawn mowers, snowmobiles, and other vehicles equipped with a 12-volt battery.

Force Launch Feature

If the vehicle's battery voltage is below 2 V and a standard start is not possible, hold down the emergency start button for 3 seconds. Once the green indicator light comes on, the vehicle must be started within 30 seconds.

High-capacity 44.4 Wh battery

The built-in 44.4 Wh battery provides power to start the vehicle and charge portable electronic devices. With a fully charged battery, you can start the engine approximately 20 times in a car with a 1.5-liter gasoline engine.

Two USB charging ports

Two 5 V, 3 A USB ports allow you to charge two devices at the same time, such as smartphones, tablets, cameras, e-readers, and other compatible devices.

Smart Battery Terminals

The updated battery terminals feature an enlarged contact surface and double metal conductors, which ensure a more stable electrical connection. The ergonomic design makes it easier to securely attach the terminals to the battery.

Six Security Systems

The smart jump start cable provides protection against reverse polarity, short circuits, overcurrent, excessive temperature, insufficient charge level, and excessive jump-start duration. Light indicators and audible alerts indicate the connection status and any potential errors.

Three-mode LED flashlight

The built-in LED flashlight provides a light output of 100 lm and supports steady-on, flashing, and SOS signal modes. It is suitable for vehicle inspections, working in the dark, and emergency situations.

Durable construction

The housing is designed to protect the device from dust and impacts. The EC5 connector is equipped with a protective cap that helps keep the connector free of dirt.

USB-C Charging

The power supply is charged via a 5 V, 3 A USB-C port. A full charge takes approximately 4.3 hours when using a compatible 5 V, 3 A power adapter.

Long service life

The battery is designed for more than 1,000 charge and discharge cycles. When the device is not in use, it can retain its charge for up to 12 months; however, for optimal battery performance, it is recommended to charge it at least once every three months.

Compact and portable design

The compact 187 × 88 × 43 mm case is easy to store in a car and is ideal for taking along on trips, daily commutes, and in emergencies.

Specifications

Manufacturer: AVAPOW
Model: E5 PRO
Device Type: Portable Car Battery Jumper
Suitable Battery Voltage: 12 V
Maximum Starting Current: 2000 A
Battery capacity: 44.4 Wh
Suitable gasoline engine displacement: Up to 7 L
Suitable diesel engine displacement: Up to 4 L
Suitable vehicles: Cars, trucks, motorcycles, boats, RVs, tractors, ATVs, lawn mowers, and snowmobiles
Jump-start function: Yes
Forced start activation time: 3 s
Vehicle start time after function activation: Up to 30 s
Number of starts on a full charge: Approximately 20 times with a 1.5 L gasoline engine
Number of battery cycles: More than 1,000
EC5 output: 12 V, 2,000 A
Number of USB ports: 2
First USB port: 5 V, 3 A
Second USB port: 5 V, 3 A
USB-C input: 5 V, 3 A
Full charge time: Approximately 4.3 h
LED flashlight power: 1 W
LED flashlight luminous flux: 100 lm
LED flashlight modes: Constant on, flashing, and SOS signal
Number of safety systems: 6
Reverse polarity protection: Yes
Short-circuit protection: Yes
Overcurrent protection: Yes
Over-temperature protection: Yes
Low-charge-level protection: Yes
Start-up time limit protection: Yes
Dust resistance: Yes
Impact-resistant design: Yes
Operating temperature: −5 °C to +55 °C
Storage temperature: −20 °C to +65 °C
Dimensions: 187 × 88 × 43 mm
Included in the package: AVAPOW E5 PRO jump starter, smart jumper cables with battery clamps, USB-A to USB-C cable, and user manual
Power adapter: Not included

Genius Boost HD 2000A UltraSafe Lithium Battery Starter

Key Features

• Powerful and compact:

  • 2000A of power to quickly start an empty battery in seconds.
  • Up to 40 starts on a single charge.
  • Compact and portable, ideal for everyday and emergency situations.

• UltraSafe technology:

  • Patented safety technology provides spark-proof connections and reverse polarity protection.
  • Safe and easy to use for everyone.

• Versatile power source function:

  • Doubles as a portable power source, suitable for charging USB devices such as smartphones and tablets.
  • Can also be used for 12V devices such as tyre pumps or power inverters.

• Wide range of applications:
  Suitable for cars, boats, motorcycles, caravans and other vehicles with petrol engines up to 8 litres and diesel engines up to 6 litres.

Additional features

• 400 lm bright LED light:

  • With 7 lighting modes including SOS and emergency strobe.

• Connectivity and charging:

  • USB output: 2.1A
  • MicroUSB input: 2.1A
  • 12V output: 15A
  • 12V fast charging: 3A

Technical data

• Weight: 2.27 kg
• Package:
  • 1m USB-MicroUSB cable
  • XGC 12V extension cable with XGC 12V adapters (male and female connectors)
• Note: Charger 1700-XGC004 sold separately.

Genius Boost HD 2000A is the ideal solution for fast and reliable engine starting, device charging and power delivery, offering high performance and versatility in any situation.

Features and Details

Quick Start for a Dead Battery: Equipped with a maximum current of 3,000 A and a 16,000 mAh lithium battery, this starter easily starts gasoline engines up to 9 L or diesel engines up to 7 L. Suitable for cars, motorcycles, trucks, boats, and even lawn mowers.

Flashlight function: The car battery starter supports three lighting modes (constant, strobe, and SOS). It provides reliable lighting in emergency situations, such as when the battery is dead at night, while camping, on off-road trips, during night walks, or during unexpected power outages.

As an external battery: Equipped with USB ports, this car battery jump starter also functions as a portable power bank, allowing you to charge your phone, tablet, or laptop while traveling or in an emergency.

Enhanced security measures: Includes 12 protective features, including protection against reverse polarity, sparks, overcharging, reverse charging, overcurrent, overvoltage, overload, short circuits, low or high temperatures, and more. This car starter ensures safe operation every time.

Compact and durable design: Its compact size makes it easy to store the starter in your car. The carrying case makes it easy to transport. The housing is made of durable ABS and PC materials, which are dustproof, impact-resistant, and fire-resistant for long-term use.

Product Description 

The Genius Boost Pro 3000 A lithium-ion jump starter is designed for gasoline and diesel engines of all sizes (including those over 10 liters) in cars, boats, trucks, tractors, and more. The device is compact, very powerful, and safe to use. It is equipped with spark-proof technology and protection against reverse polarity, overcharging, overcurrent, open circuit, and overheating.

A single charge allows for up to 80 engine starts. A full charge from a 12 V source takes approximately 3 hours. The device can also be used as a 12 V power bank and USB charger for mobile devices. Built-in powerful LED flashlight (500 lm) with 7 modes, including SOS and emergency flashing. IP65-rated housing, suitable for operation over a wide temperature range.

Specifications

• Model: Genius Boost Pro

• Voltage: 12 V

• Maximum current: 3,000 A

• Battery type: lithium-ion (Li-ion)

• Net weight: 3.4 kg

• Dimensions (W × D × H): 312 × 177 × 68 mm

• Number of starts per charge: up to 80

• Charging time (from 12 V): ~3 h

• Charging input:

  • USB-C: 5 V / 2.1 A

  • 12 V fast charging: 3 A

• Outputs:

  • USB: 5 V / 2.1 A

  • 12 V power output: 15 A

• LED lighting: 500 lm, 7 modes (including SOS and emergency strobe)

• Protections: against sparks, reverse polarity, overcharge, overcurrent, open circuit, overheating

• Protection Class: IP65

• Operating temperature: −30 °C to +50 °C

• Warranty: 12 months

Package Contents

• USB-C cable (1 m)

• XGC 12 V extension cable with XGC 12 V adapters (male and female)

Features and Details

20 A battery charger:
This smart battery charger supports 6 V / 12 V / 24 V lead-acid batteries (Wet / GEL / MF / CA / EFB / AGM / Calcium) and 12 V / 24 V LiFePO4 batteries. Up to 20 A output current with adjustable voltage and current, as well as a professional mode for non-standard batteries.

Four smart charging modes:
The car battery charger features a charging mode with 7-stage smart charging technology, a maintenance mode for low-current maintenance, a desulfation mode for restoring worn-out batteries, and a forced mode for activating batteries below 1 V.

Several protective mechanisms:
Built-in protection against overvoltage, overcurrent, short circuits, reverse polarity, overheating, low temperature, and overvoltage. With thermal compensation, this lithium battery charger automatically adjusts the current and voltage for safe charging.

LCD display for real-time monitoring:
The LiFePO4 battery charger is equipped with a 3.1-inch LCD display that shows the charging mode, voltage, current, battery level, and battery status in real time. Dedicated buttons ensure quick and easy operation.

Wide range of applications:
A single LiFePO4 lithium battery charger suitable for both small and large devices—ideal for seated vehicles, electric shears, cars, motorcycles, RV, ATVs, small golf carts, and compact lawn mowers, providing a wide range of charging options.

Features and Details

30 A Battery Charger This smart battery charger supports 6 V / 12 V / 24 V lead-acid batteries (Wet / GEL / MF / CA / EFB / AGM / Calcium) and 12 V / 24 V LiFePO4 batteries. Maximum output current up to 30 A with adjustable voltage and current, as well as a professional mode for non-standard batteries.

Four Smart Charging Modes
This car battery charger features a charging mode with 7-stage smart charging technology, a trickle charge mode for maintaining low-current batteries, a desulfation mode for restoring worn-out batteries, and a forced charge mode for activating batteries below 1 V.

Multi-Level Protection: Built-in protection against overvoltage, overcurrent, short circuits, reverse polarity, overheating, and low temperature. With thermal compensation, this lithium battery charger automatically adjusts the current and voltage for safe charging.

Real-Time LCD Display: The
LiFePO4 Battery Charger is equipped with a 3.1-inch LCD display that shows the charging mode, voltage, current, battery charge level, and status in real time. Dedicated control buttons ensure quick and easy operation.

Wide Range of Applications
A single LiFePO4 lithium battery charger for both small and large devices. Suitable for ride-on mowers, electric hedge trimmers, cars, motorcycles, RVs, ATVs, small golf carts, and compact lawn mowers.

Specification

• Weight: 1,18 kg (net)

• Type: Limited series

• Current: 5 A

• IP class: IP65

• Model: MXS 5.0 Power Kit

• Description: Automatic 8-stage battery charger with maintenance charge

• Compatibility: 1.2-110 Ah lead-acid batteries (open, maintenance-free, AGM, gel)

• Optional: Powerbank 5000 mAh

• Warranty: 60 months

Product Specifications

Dimensions: 235 × 108 × 65 mm
Weight: 1.55 kg (net 1.30 kg)
Tip: Blue Smart IP22 – 1 output
Voltage: 12 V
Current: 15 A
IP protection rating: IP22

Certification: ECE R10-5, EN 60335-1/-2-29, EN 55014-1, EN 61000-6-3/-3-2

Information:
Automatic battery charger with built-in Bluetooth —you can check the status of the battery and charger on your smartphone or tablet. Very high efficiency (generates up to 4× less heat than the industry standard). A 6-stage charging algorithm automatically optimizes charging based on battery usage. When the battery is fully charged, power consumption drops to 0.5 W.
Storage, “night,” and “low” modes are available: output power is reduced to 50%, and operation is completely silent; “night” mode automatically ends after 8 hours; “low” mode must be turned off manually.
Suitable for all battery types, including lithium-ion. 1 charging output; can be used as a power source.
Protections: overheating (reduces output current at +50 °C ), reverse polarity (fuse), output short circuit.
Aluminum housing, 1.5 m cable with CEE 7/7 plug.
Input: 180–265 V AC, 45–65 Hz.
Charging (normal/night): 15 / 7.5 A.
Efficiency: 93%.
No-load power consumption: 0.5 W.
Operating conditions: −40 °C to +60 °C, relative humidity 98% (non-condensing).

Warranty: 60 months

Specifications

Weight: 3.50 kg (net 3.50 kg)
Type: 180 A BOOST
Voltage: 12/24 V
Current: 30 A
Application: designed for charging lead-acid batteries and boosting starting power; overload protection; clear and easy-to-read ammeter
Boost current (max.): 180 A
Charging: 12 V – 40 A / 24 V – 35 A (max. 60 A)
Battery capacity: 30–500 Ah
Housing: durable metal housing with handle
Protection class: IP20
Gross weight: 12 kg

Warranty: 12 months

Description

The Victron Energy Blue Smart IP65 12/25 is a smart 12 V battery charger with a 25 A charging current and built-in Bluetooth connectivity. It is suitable for lead-acid, AGM, gel, flooded, and lithium batteries in cars, RVs, motorcycles, boats, and other vehicles.

The adaptive seven-stage charging algorithm automatically adjusts the charging process to the battery's condition, helping to ensure a full charge and extend the battery's service life. A special four-stage charging algorithm is used for lithium batteries.

Using the VictronConnect app, you can monitor the charging voltage and current, view the charging history, select a charging mode appropriate for your battery type, and change the charger settings.

The IP65 protection rating ensures protection against dust, water splashes, and chemical exposure. The charger is protected against reverse polarity, short circuits, and overheating. Passive cooling without a fan ensures quiet operation.

Key Features

Built-in Bluetooth connectivity for control via the VictronConnect app.

An adaptive seven-stage charging algorithm for lead-acid batteries.

A special four-stage charging mode for lithium batteries.

A recharge mode to improve the performance of partially sulfated lead-acid batteries.

Storage mode for long-term battery maintenance without overcharging.

Low-current mode for batteries with lower capacity.

Power supply mode for providing a stable DC voltage.

Automatic temperature compensation.

The ability to start charging a deeply discharged battery from nearly 0 V.

IP65 protection rating.

Protection against reverse polarity, short circuits, and overheating.

The set includes M8 ring clamps and battery clamps.

Specifications
Manufacturer: Victron Energy
Model: Blue Smart IP65 12/25
Supplier code: 1702-87223
Nominal battery voltage: 12 V
Maximum charging current: 25 A
Charging current in low-current mode: 10 A
Rated input voltage: 220–240 V
Input voltage range: 180–265 V
Rated frequency: 50–60 Hz
Frequency range: 45–65 Hz
Maximum efficiency: 94%
Standby power consumption: 0.5 W
Absorption voltage in standard mode: 14.4 V
Trickle voltage in standard mode: 13.8 V
Storage voltage in standard mode: 13.2 V
Absorption voltage in high-voltage mode: 14.7 V
Absorption voltage in lithium mode: 14.2 V
Storage voltage in lithium mode: 13.5 V
Charging algorithm: Adaptive seven-stage algorithm; four-stage algorithm for lithium batteries
Maximum recommended battery capacity: 250 Ah
Minimum lead-acid battery capacity in maximum current mode: 83 Ah
Minimum lead-acid battery capacity in low-current mode: 33 Ah
Minimum lithium battery capacity in maximum current mode: 50 Ah
Minimum lithium battery capacity in low-current mode: 20 Ah
Connection: Bluetooth via the VictronConnect app
Cooling: Passive, fanless
Operating temperature: -40 to 50 °C
Full rated power: up to 30 °C
Maximum relative humidity: 95%
Protection: Against reverse polarity, short circuit, and overheating
Protection rating: IP65
Housing material: Plastic
Color: Black
Power cord length: 1.5 m
Battery cable length: 1.5 m
Battery cable cross-section: 6 mm²
Battery connections: M8 ring terminals and battery clamps
Dimensions (height × width × depth): 75 × 140 × 240 mm
Weight: 1.9 kg
Safety standards: EN 60335-1, EN 60335-2-29
Automotive certification: ECE R10

Features and Details

Support for various battery types: This 12 V 60 A DC–DC charger is compatible with lead-acid and lithium batteries and works with various types of generators (alternators). It is ideal for charging backup batteries in RVs, trucks, and boats.

Multiple levels of protection: Built-in protection against overvoltage, undervoltage, overheating, and reverse polarity ensures safe and stable operation. Isolated input/output protects the vehicle’s electrical system from interference.

Smart multi-stage charging: The charger provides multi-stage charging modes for LiFePO4 batteries (2 stages) and lead-acid batteries (3 stages: fast charge, absorption, float), ensuring optimal charging and extending the battery’s service life.

Compact and easy to install: The elegant aluminum alloy design with pre-drilled mounting holes makes it easy to install this DC-DC charger in any suitable location.

Battery Activation: Thanks to the lithium battery reactivation feature, this DC–DC battery charger can quickly restore inactive or deeply discharged batteries, ensuring they are ready for use at any time.

Technical Specifications

Weight: 4.00 kg (net 4.00 kg)
Model: 300 A BOOST
Voltage: 12/24 V
Current: 30 A
Information: designed for charging lead-acid batteries and providing a boost for starting; overload protection; clear and easy-to-read ammeter;
— starting boost (max.): 300 A
— charging: 12/24 V, 35 A, max. 45 A
— Suitable for 30–450 Ah batteries;
Durable metal housing, wheels, IP20 protection rating.

Warranty: 12 months

Characteristics

Voltage: 6 / 12 V
Current: 1 A
Model name: BX4
Information: 5 phases, automatic mode switching with memory function
For batteries: 1.2–20 Ah
Dimensions: 109 × 65 × 39 mm

Description

Universal 6/12/24 V Charging
The VEVOR smart battery charger provides up to 20 A of charging current and is designed for 6 V, 12 V, and 24 V systems. It is suitable for lead-acid batteries as well as 12 V and 24 V LiFePO4 batteries, making it usable for cars, motorcycles, lawn mowers, ATVs, RVs, and other equipment.

7-stage smart charging
The automatic charging process adapts to the battery’s condition and includes pulse, full-current, constant-voltage, charge verification, and maintenance phases. This helps ensure efficient charging and proper battery maintenance over the long term.

Maintenance and Desulfation Modes
The Maintain mode is designed for long-term battery maintenance, while the Desulfation mode uses pulsed operation to help reduce sulfate buildup on the plates of lead-acid batteries and restore aged batteries.

LCD display for real-time monitoring
The large LCD screen allows you to view the charging mode, voltage, current, battery charge level, and status. This makes it easy to monitor the charging process without the need for separate measuring devices.

Protection for Everyday Use
Built-in protection features help protect the charger and battery against overvoltage, overcurrent, short circuits, reverse polarity, overheating, and low temperatures. The charger also uses thermal compensation to adjust charging parameters based on temperature changes.

Wide Range of Applications
The charger is designed for a variety of vehicle and garden equipment batteries—cars, motorcycles, ATVs, lawn mowers, small golf carts, RVs, and other equipment.

Specifications

• Brand: VEVOR
• Model: XFH-SS03
• Maximum charging current: 20 A
• Supported voltage: 6 V / 12 V / 24 V
• Battery types: lead-acid, LiFePO4, and lithium batteries
• Types of lead-acid batteries: Wet, Gel, MF, CA, EFB, AGM, Calcium
• LiFePO4 support: 12 V / 24 V
• Charging technology: 7-stage smart charging
• Modes: Charging, Maintain, Desulfation, Force/Supply
• Desulfation function: Yes
• LCD display: Yes
• Thermal compensation: Yes
• Protection: against overvoltage, overcurrent, short circuits, reverse polarity, overheating, and low temperature
• Housing material: ABS + PC
• Operating temperature: –10 to +40 °C
• Power cord length: 1.8 m
• Battery cable length: 1.2 m

The main advantage

One charger for multiple battery systems. The VEVOR XFH-SS03 combines a powerful charge of up to 20 A, 6/12/24 V compatibility, support for LiFePO4 and various lead-acid batteries, automatic 7-stage charging, desulfation and trickle charge modes, as well as LCD status monitoring. It is a practical solution for both daily charging and long-term battery maintenance.

Features and Details

Universal Compatibility: With a charging current of up to 30 A, this smart battery charger supports 6 V, 12 V, and 24 V lead-acid, LiFePO4, and ternary lithium batteries. It provides a single charging solution for cars, large RVs, trucks, boats, and other vehicles.

7-stage smart charging: The car battery charger uses pulse charging, trickle charging, constant-current charging, constant-voltage charging, full-charge self-test, float maintenance mode, and charge termination. This ensures efficient energy transfer and reliable charging.

Pulse Desulfation Mode: The smart car battery charger is equipped with a professional pulse desulfation function that helps reduce sulfate deposits on the battery plates, restore old or deeply discharged batteries, and reduce replacement costs.

Multiple protection features: The LiFePO4 battery charger responds quickly to overvoltage, overcurrent, overheating, short circuits, reverse polarity, and low temperatures, helping to ensure stable operation of the charger, the battery, and connected equipment.

LCD display for real-time monitoring: The lead-acid and lithium battery charger is equipped with a clear, large LCD screen that displays voltage, current, battery charge level, operating mode, and other important information, allowing you to easily monitor the charging status.

Features and Details

Universal Compatibility: With a charging current of up to 25 A, this smart battery charger supports 6 V, 12 V, and 24 V lead-acid, LiFePO4, and ternary lithium batteries. It provides a single charging solution for cars, medium-sized RVs, motorcycles, and other vehicles.

7-stage smart charging: The car battery charger uses pulse charging, trickle charging, constant-current charging, constant-voltage charging, full-charge self-test, floating maintenance mode, and charge termination. This ensures efficient energy transfer and reliable charging.

Pulse Desulfation Mode: The smart car battery charger is equipped with a professional pulse desulfation function that helps reduce sulfate deposits on the battery plates, restore old or deeply discharged batteries, and reduce replacement costs.

Multiple protection features: The lithium and LiFePO4 battery charger quickly responds to overvoltage, overcurrent, overheating, short circuits, reverse polarity, and low temperatures, helping to ensure stable operation of the charger, the battery, and connected equipment.

LCD display for real-time monitoring: The lead-acid and lithium battery charger is equipped with a clear, large LCD screen that displays voltage, current, battery charge level, operating mode, and other important information, allowing you to easily monitor the charging status.

Features and Details

Support for various battery types: This 12 V 20 A DC–DC charger is compatible with lead-acid and lithium batteries and works with various types of generators (alternators). It is ideal for charging backup batteries in RVs, trucks, and boats.

Multiple levels of protection: Built-in protection against overvoltage, undervoltage, overheating, and reverse polarity ensures safe and stable operation. Isolated input/output protects the vehicle’s electrical system from interference.

Smart multi-stage charging: The charger provides multi-stage charging modes for LiFePO4 batteries (2 stages) and lead-acid batteries (3 stages: fast charge, absorption, float), ensuring optimal charging and extending the battery’s service life.

Compact and easy to install: The elegant aluminum alloy design with pre-drilled mounting holes makes it easy to install this DC–DC charger in any suitable location.

Battery Activation: Thanks to the lithium battery reactivation feature, this DC–DC battery charger can quickly revive inactive or deeply discharged batteries, ensuring they are ready for use at any time.

Features and Details

Support for various battery types: This 12 V 30 A DC–DC charger is compatible with lead-acid and lithium batteries and works with various types of generators (alternators). It is ideal for charging backup batteries in RVs, trucks, and boats.

Multiple levels of protection: Built-in protection against overvoltage, undervoltage, overheating, and reverse polarity ensures safe and stable operation. Isolated input/output protects the vehicle’s electrical system from interference.

Smart multi-stage charging: The charger provides multi-stage charging modes for LiFePO4 batteries (2 stages) and lead-acid batteries (3 stages: fast charge, absorption, float), ensuring optimal charging and extending the battery’s service life.

Compact and easy to install: The elegant aluminum alloy design with pre-drilled mounting holes makes it easy to install this DC–DC charger in any suitable location.

Battery Activation: Thanks to the lithium battery reactivation feature, this DC–DC battery charger can quickly restore inactive or deeply discharged batteries, ensuring they are ready for use at any time.

Product Information

SKU: 1-92254

Package size: 1/12

Dimensions: 100 × 65 × 38 mm

Weight: 1.25 kg

Voltage: 6 / 12 V

Current: 750 mA

Information: Automatic 3-stage battery charger. Maintenance voltage range: 6.4–6.7 V and 12.8–13.2 V. Suitable for 6 V / 12 V batteries with a capacity of 1.2–20 Ah.

Warranty: 12 months

SKU: 1-92606
Package size: 1/5
Weight: 600 g (net 600 g)
Voltage: 12–24 V

The C-PWR BAT-T is a universal battery tester suitable for 12V and 24V lead-acid, AGM, EFB, and GEL batteries with a capacity ranging from 100 to 2000 CCA.
Features:

• Checking the Battery Status

• Charge Check

• Cold-Start Power Test

• Inspection of the Generator (Charging System)

The tester features a multilingual control system—Finnish, English, German, French, and other languages are available.

Warranty: 12 months

Description:

High-Power 12V to 230V Voltage Converter

The KAMAR E1928 is a voltage converter designed to convert the voltage of a 12V DC power system to 230V. It allows you to use various 230V electrical devices in locations where only a 12V power source from a vehicle or battery is available.

1500 W continuous power

The inverter has a continuous output power of 1,500 W, so it is designed to power relatively high-power electrical devices. The manufacturer cites various power tools and household appliances as examples of devices that need to be used away from a permanent power source.

3,000 W maximum power

The peak power reaches 3,000 W. This power reserve allows the converter to temporarily handle a higher load than its rated continuous power of 1,500 W.

Suitable for vehicles, RVs, and boats

The 12V input voltage allows the converter to be used in passenger cars, campers, and boats with a compatible 12V battery power system. It is a practical solution for providing mobile 230V power in locations where the electrical grid is not available.

Efficiency greater than 85%

At full load, the inverter's efficiency exceeds 85%. This means that a large portion of the electrical energy received by the battery is used to provide 230V power to the connected devices.

Wide operating temperature range

The converter is designed for operation at ambient temperatures ranging from -5°C to +65°C, which allows it to be used in a variety of operating conditions for vehicles and mobile power supply systems.

Battery Connection Cable Set

The technical specifications for this particular product list a battery cable kit designed to connect the converter to a 12V battery power source.

Not intended for inductive or refrigeration loads

In the product description, the manufacturer specifically states that this converter is not intended for use with inductive loads or refrigeration equipment. When selecting a connected device, consider not only its rated power but also the type of load.

Sturdy design for mobile use

The converter is designed for mobile power supply and for powering higher-capacity electrical devices from a 12V battery system. The manufacturer emphasizes stable operation and efficient use of battery power.

2-year warranty

The manufacturer's website lists a 2-year warranty for this specific KAMAR E1928 voltage converter.

Specifications:
Product type: voltage converter
Input voltage: 12V
Output voltage: 230V
Continuous power: 1500W
Maximum peak power: 3000W
Efficiency at full load: >85%
Operating temperature: -5°C to +65°C
Connection: battery cable set
Not intended for: inductive loads and refrigeration equipment
Package dimensions: 360x130x206mm
Weight: 2.25kg
EAN code: 5905358308066
Warranty: 2 years