VICTRON

Product Specifications

Dimensions: 235 × 108 × 65 mm
Weight: 1.55 kg (net 1.30 kg)
Tip: Blue Smart IP22 – 1 output
Voltage: 12 V
Current: 15 A
IP protection rating: IP22

Certification: ECE R10-5, EN 60335-1/-2-29, EN 55014-1, EN 61000-6-3/-3-2

Information:
Automatic battery charger with built-in Bluetooth —you can check the status of the battery and charger on your smartphone or tablet. Very high efficiency (generates up to 4× less heat than the industry standard). A 6-stage charging algorithm automatically optimizes charging based on battery usage. When the battery is fully charged, power consumption drops to 0.5 W.
Storage, “night,” and “low” modes are available: output power is reduced to 50%, and operation is completely silent; “night” mode automatically ends after 8 hours; “low” mode must be turned off manually.
Suitable for all battery types, including lithium-ion. 1 charging output; can be used as a power source.
Protections: overheating (reduces output current at +50 °C ), reverse polarity (fuse), output short circuit.
Aluminum housing, 1.5 m cable with CEE 7/7 plug.
Input: 180–265 V AC, 45–65 Hz.
Charging (normal/night): 15 / 7.5 A.
Efficiency: 93%.
No-load power consumption: 0.5 W.
Operating conditions: −40 °C to +60 °C, relative humidity 98% (non-condensing).

Warranty: 60 months

Description

The SmartSolar MPPT 100/50 charge controller harvests energy from solar panels and stores it in batteries. It maximizes the amount of energy harvested by using the latest and fastest technology, as well as smart management, to ensure that the battery is fully charged in the shortest possible time. The device helps maintain battery health and extends its service life.

MPPT, or Maximum Power Point Tracking technology, continuously monitors the voltage and current of the solar panels, ensuring that all available power is utilized and directed toward storage. This advantage is particularly noticeable on partly cloudy days, when light intensity is constantly changing.

Built-in Bluetooth enables remote monitoring and control by connecting the device to a smartphone or other device via VictronConnect. If the system is connected to the Internet via a GX device, the Victron Remote Management (VRM) portal provides access to the MPPT controller’s features anytime, anywhere. VictronConnect and VRM are available free of charge.

The Smart Load Shut-Off feature prevents damage that can result from excessive battery discharge. You can configure the voltage at which SmartSolar disconnects the load, thereby protecting the battery from excessive discharge. SmartSolar attempts to achieve a 100% charge every day. If this is not possible due to poor weather conditions, the device increases the cut-off voltage each day until the desired result is achieved. This feature is called BatteryLife because it helps maintain battery health and extends its service life.

The SmartSolar charge controller can charge even a heavily discharged battery. It can operate with a battery voltage as low as 0 V, provided the cells are not irreversibly sulfated or otherwise damaged.

Specifications

Dimensions: 130 × 186 × 70 mm
Weight: 1.53 kg (net 1.40 kg)
Model: SmartSolar MPPT 100/50
Voltage: 12/24 V
Current: 50 A
IP Protection Rating: IP43/IP22
Certifications: EN/IEC 62109-1, UL 1741, CSA C22.2
Battery voltage: 12/24 V, automatic selection
Rated PV power: 700/1400 W
Maximum PV open-circuit voltage: 100 V
Maximum PV short-circuit current: 60 A
Self-consumption: 30 mA (12 V) / 20 mA (24 V)
Charging voltage: 13.8–14.4 V / 27.6–28.8 V
Operating temperature: -30 °C to +60 °C
Maximum relative humidity: 95% non-condensing
Power terminals: 16 mm²
Warranty: 60 months

Description

The Victron Energy Blue Smart IP65 12/25 is a smart 12 V battery charger with a 25 A charging current and built-in Bluetooth connectivity. It is suitable for lead-acid, AGM, gel, flooded, and lithium batteries in cars, RVs, motorcycles, boats, and other vehicles.

The adaptive seven-stage charging algorithm automatically adjusts the charging process to the battery's condition, helping to ensure a full charge and extend the battery's service life. A special four-stage charging algorithm is used for lithium batteries.

Using the VictronConnect app, you can monitor the charging voltage and current, view the charging history, select a charging mode appropriate for your battery type, and change the charger settings.

The IP65 protection rating ensures protection against dust, water splashes, and chemical exposure. The charger is protected against reverse polarity, short circuits, and overheating. Passive cooling without a fan ensures quiet operation.

Key Features

Built-in Bluetooth connectivity for control via the VictronConnect app.

An adaptive seven-stage charging algorithm for lead-acid batteries.

A special four-stage charging mode for lithium batteries.

A recharge mode to improve the performance of partially sulfated lead-acid batteries.

Storage mode for long-term battery maintenance without overcharging.

Low-current mode for batteries with lower capacity.

Power supply mode for providing a stable DC voltage.

Automatic temperature compensation.

The ability to start charging a deeply discharged battery from nearly 0 V.

IP65 protection rating.

Protection against reverse polarity, short circuits, and overheating.

The set includes M8 ring clamps and battery clamps.

Specifications
Manufacturer: Victron Energy
Model: Blue Smart IP65 12/25
Supplier code: 1702-87223
Nominal battery voltage: 12 V
Maximum charging current: 25 A
Charging current in low-current mode: 10 A
Rated input voltage: 220–240 V
Input voltage range: 180–265 V
Rated frequency: 50–60 Hz
Frequency range: 45–65 Hz
Maximum efficiency: 94%
Standby power consumption: 0.5 W
Absorption voltage in standard mode: 14.4 V
Trickle voltage in standard mode: 13.8 V
Storage voltage in standard mode: 13.2 V
Absorption voltage in high-voltage mode: 14.7 V
Absorption voltage in lithium mode: 14.2 V
Storage voltage in lithium mode: 13.5 V
Charging algorithm: Adaptive seven-stage algorithm; four-stage algorithm for lithium batteries
Maximum recommended battery capacity: 250 Ah
Minimum lead-acid battery capacity in maximum current mode: 83 Ah
Minimum lead-acid battery capacity in low-current mode: 33 Ah
Minimum lithium battery capacity in maximum current mode: 50 Ah
Minimum lithium battery capacity in low-current mode: 20 Ah
Connection: Bluetooth via the VictronConnect app
Cooling: Passive, fanless
Operating temperature: -40 to 50 °C
Full rated power: up to 30 °C
Maximum relative humidity: 95%
Protection: Against reverse polarity, short circuit, and overheating
Protection rating: IP65
Housing material: Plastic
Color: Black
Power cord length: 1.5 m
Battery cable length: 1.5 m
Battery cable cross-section: 6 mm²
Battery connections: M8 ring terminals and battery clamps
Dimensions (height × width × depth): 75 × 140 × 240 mm
Weight: 1.9 kg
Safety standards: EN 60335-1, EN 60335-2-29
Automotive certification: ECE R10

Description:
Powerful true sine wave inverter with integrated battery charger, adaptive charging technology and fast-acting AC power switch - all in one compact unit.

Key features:

• Non-interrupting function: the main output connection takes over the load in < 20 ms in case of power supply problems

• 2 AC outputs: second output active only when AC input is available, ideal for loads that should not drain the battery

• PowerAssist technology: prevents overloading of limited AC power by reducing the charge or temporarily adding power from the battery

• Three-phase option: 3-unit configuration for three-phase output possible

• Parallel operation: up to 6 units (or 6 sets of 3) can be operated in parallel to increase total output

Inverter parameters:

• Input: 9.5-17 V

• Output: 230 VAC ±2% / 50 Hz ±0.1%

• Continuous power (@25 °C): 3000 W

• Maximum power (peak): 6000 W

• Efficiency: up to 93 %

• No-load consumption: 20 W

Charger parameters:

• Suitable for: lead-acid and lithium-ion batteries

• Battery capacity: 400-1200 Ah

• Recommended fuse: 400 A

• Recommended cable:

  • 0-5 m: 2 × 50 mm²

  • 5-10 m: 2 × 70 mm²

• AC input: 187-265 VAC

• Charging current (for house battery): 120 A

• Charging current (starter battery): 4 A

• Temperature sensor: included

• Remote on/off: yes

Additional information:

• Protection class: IP21

• Operating temperature: -40 °C to +65 °C

• Maximum humidity (non-condensing): 95%

• Weight: 18 kg

  Technical Specifications - VICTRON ENERGY MultiPlus 3000VA

  • Dimensions: 362 × 258 × 218 mm

  • Weight: 20,90 kg (net: 18,85 kg)

  • Type: MultiPlus 3000VA

  • Voltage: 230 VAC / 12 V

  • Power: 3.00 kW

  • Housing material: Aluminium

  • IP protection: IP21

  • Certificates/Approvals:

    • ECE R10-4

    • EN-IEC 60335-1 / -2-29

    • IEC 62109-1

    • EN 55014-1 / -2

    • EN-IEC 61000-3-2 / -3-3 / -6-1 / -6-2 / -6-3

  This model combines an inverter and a battery charger with high efficiency, durability and compliance with strict European safety and EMC standards.

Information:
Low voltage-temperature coefficient improves high temperature performance.
Excellent low-light performance and high light sensitivity across the solar spectrum.
25-year limited warranty on power generation and performance.
5 5 year limited warranty on materials and workmanship.
A sealed, waterproof, multi-functional junction box provides a high level of safety.
High performance bypass diodes reduce power losses caused by shading.
Advanced EVA (ethylene-vinyl acetate) encapsulation system with three-layer back coating meets the most stringent safety requirements for high voltage operation.
Durable, anodised aluminium frame allows modules to be easily roof-mounted using a variety of standard mounting systems.
High-quality, high-transmittance toughened glass for increased rigidity and impact resistance.
High-power models with pre-wired quick-connect system and MC4 (PV-ST01) connectors.

Warranty (in months): 60

Specifications

Dimensions: 360 × 240 × 100 mm

Weight: 7.50 kg (net weight 6.50 kg)

Model: MultiPlus 12/800/35

Voltage: 230 VAC / 12 V

Protection class: IP21

Certifications: ECE R10-5, EN-IEC 60335-1/-2-29, EN 62109-1, EN 55014-1/-2, EN-IEC 61000-3-2/-3-3/-6-1/-6-2/-6-3

Information

35 A battery charger with the POWER ASSIST function, which extends the capacity of the alternative power source. During peak load, the battery charge is automatically reduced to prevent overload, and the required power is drawn from the battery. When the load decreases, the excess current is used to charge the battery.

The NO BREAK feature ensures an uninterrupted power supply. Up to six Multi devices can be operated in parallel for higher power output, while three devices can be configured for a three-phase system.

4-stage charging system and dual battery charging

Powerful charging with customizable charging software optimizes the automatic three-stage charging process based on the battery's condition and adds a fourth trickle-charging mode for extended operation.

High starting power

Suitable for devices with high inrush current, such as LED lamps, halogen lamps, and power tools.

SEARCH MODE

Power consumption is reduced by approximately 70% when there is no load. In inverter mode, the device shuts off when the load is very low and briefly activates every two seconds to check its status. If a sufficient load is detected, the inverter continues to operate.

Programmable Relay and Remote Control

The relay can be used as an alarm relay. System configuration, monitoring, and control are available via the web. The device is ready for use immediately after installation. The battery charging voltage and SEARCH MODE can be adjusted using DIP switches.

Inverter Specifications

Input: 9.5–17 V DC
Output: 230 VAC 50 Hz
Maximum power: 1600 W
Maximum efficiency: 92%
No-load power consumption: 7 W (2 W in SEARCH MODE)

Charger Specifications

Input: 187–265 VAC
Output voltage:

• 14.4 V (absorption)
• 13.8 V (float)
• 13.2 V (storage)

Charging current:

• Main battery: 35 A
• Starting battery: 1 A

Includes a temperature sensor.

General Information

Built-in 150 A DC fuse.
Protection against:

• short circuit
• overload
• battery voltage that is too high or too low
• overheating
• 230 VAC at the inverter output
• excessive voltage ripple

Communication port: VE.Bus

Operating temperature: -40 °C to +65 °C

Maximum relative humidity: 95% non-condensing

Warranty: 60 months

Specifications

Dimensions: 375 × 214 × 110 mm

Weight: 12.00 kg (net weight 11.50 kg)

Model: MultiPlus Compact 800VA

Voltage: 230 VAC / 12 V

Housing material: Aluminum

Protection class: IP21

Certifications: ECE R10-4, EN-IEC 60335-1/-2-29, IEC 62109-1, EN 55014-1/-2, IEC 61000-6-1/-6-2/-6-3

Information

35 A battery charger, a powerful pure sine wave inverter, a modern battery charger with adaptive charging technology and a fast 16 A AC switch, all in one compact unit.

PowerAssist feature

Prevents overloading of a limited AC power source. Battery charging is automatically reduced if there is a risk of overload, and the required additional power is drawn from the battery.

Uninterrupted power supply

The NO BREAK feature ensures an automatic switch to battery power in less than 20 ms, maintaining uninterrupted operation of connected devices.

Parallel and Three-Phase Operation

Three units can be configured in a three-phase system. In parallel operation, up to 6 devices or 6 sets of 3 devices each can be connected to achieve higher power output.

Programmable relay.

Defense

Protection against:

• output short circuit
• overload
• battery voltage that is too low or too high

Inverter Specifications

Input: 9.5–17 V
Output: 230 VAC ±2% / 50 Hz ±0.1%
Power at 25 °C:

• 700 W continuous
• 1,600 W maximum

Maximum efficiency: 92%

Standby power consumption: 8 W

Charger Specifications

Suitable for 40–200 Ah batteries

AC input: 187–265 VAC

Charging current:

• Main battery: 35 A
• Starting battery: 4 A

The kit includes a battery temperature sensor and a remote on/off function.

Operating temperature: -40 °C to +65 °C

Maximum relative humidity: 95%, non-condensing

Battery cables: 1.5 m

AC connection: G-ST18i

Warranty: 60 months

Dimensions: 53.00 x 51.00 x 27.00 mm
Weight: 90g (net 90g)
Type: Orion-Tr 24/12-5
Voltage: 24V→12V
Power: 60 W
Current: 5 A
IP rating: IP43
Approvals: ECE R10-4, EN 60950, EN 61000-6-1/-6-2/-6-3, EN 55014-1/-2
Information: Short-circuit safe, parallel, high temperature protected, input: 18-35V, output nominal: 12.7V, output voltage tolerance: ±0.2V, rms, maximum current: 5A (cont.7A (10s @ nominal output voltage), maximum cable size 3.3 mm², efficiency 95%, no-load current <20mA, IP43 (when screw terminals installed oriented downwards), operating temperature -20°C ... +55°C, RH 95% (non-condensing), fixation: 4xM4