STRANDS 10-35V LED STROBO controller, IP68, 100.00 x 17.00 x 50.00mm, black

Voltage (DC)
Input: 10–35 V DC Output: 10–35 V DC
Power consumption (W) 12 V
Maximum power: 6 × 30 W
Power consumption (W) 24V
Maximum power: 6x 30W
IP rating 68
Housing color Black
Connection Cable
Cable length (mm) Output: 450 mm Input: 500 mm
Length (mm) 100
Depth (mm) 50
Height (mm) 17
CC (mm) 90
The strobe controller offers many great features and will take your vehicle to the next level. The strobe controller has 12 flashers, is waterproof, and comes with a 3-year warranty. The strobe controller connects to the parking lights on your work lights, which consume less than 30 W, or to running lights and other lights that you want to flash and that consume less than 30 W. The strobe controller has six output channels; connect the red (positive) wires and black (negative) wires to the lights and keep them in the same order. If you are not using all six channels, insulate the unused cable ends to prevent accidentally causing a short circuit on the PCB. If the light is already connected to ground/the chassis, connect only the red, positive wires. In the incoming power supply, you will find one red, one black, and one yellow wire. The red and black wires are connected to a button in the cabin or to a switch. The yellow wire connects to the red one to select one of the desired patterns. The patterns are dynamic / active, and it is important to connect the channels in the order in which you want the lights to flash.