Chemicals for machinery care

DETURNER CERAMIC DETAILER Liquid ceramic wax

Usage:

1. Wash and dry the car according to the dithyling technology.
2. Apply the microfibre (350-400GSM) with one blow of the chemical.
3. Then 2-3 blows per panel and spread the product with microfibre.
   
4. If necessary, buff the surface with the other side of the microfibre and enjoy the glossy effect of the body.

Safety information:

Safety requirement signs:

P101 If medical advice is required, relevant information is given on the packaging or label P102 Keep away from children P103 Read the label before use P280 Use protective gloves/protective clothing/eye protection.

Detergent content: < 5% non-ionic surfactants, preservatives: (methylchloroisothiazolinone and methylisothiazolinone, bronopol); Fragrance composition: (d-limonene, eugenol); Colourants

Nano wax

A coating with an immediate hydrophobic effect, apply to a clean and damp varnish to protect and improve the gloss. The treated surface becomes slippery, which makes drying the body after washing more pleasant and faster. Also suitable for treating discs to make it easier to keep them clean for longer.

How to use:

1. Wash and rinse the car thoroughly.
2. Spray the product directly onto a wet car.
3. Rinse the product thoroughly with clean high-pressure water.
4. Do not use the product in direct sunlight, do not allow it to dry.
5. Wipe the clean water off the car with a squeegee or blow the surface.

Deturner Xpert line PREPARE Surface preparation agent
Prepare the surface for applying wax, ceramic or other coating by cleaning it completely. Correctly selected additives, including alcohols, will remove residual polishing pastes, greases, waxes and silicones.
Recommended for checking the final quality also on soft varnishes. Increases the bond between the surface and any type of coating.

Usage:

Spray thoroughly on the microfiber and then spread over the entire surface you want to clean.
Wait and then wipe off the excess product with dirt with an appropriate microfibre.
The product can also be sprayed directly on the surface and the excess can be wiped off with an appropriate microfiber.

GYEON Q²M FABRIC CLEANER

DEEP CLEANING FOR FABRICS

A powerful cleaner for fabric interiors and surfaces. Formulated to remove stains, dirt and odours not only effectively but also safely from all types of fabrics. The product will leave your interior clean, fresh and ready for protection with Q² FabricCoat.

Q²M FabricCleaner can be used both as a one-step cleaner (with brush and microfibre) and as an effective spray before wet cleaning with a washer. It cleans and prepares fabrics for the protective coating.

Usage:

Spray a liberal amount on the surface. Work the product through with Q²M LeatherBrush or another brush suitable for fabrics. Wipe and dry the residue with Q²M BaldWipe Microfibre. Repeat the process if necessary. For light soiling, spray onto the microfibre and wipe the desired surface. For deep stains, work the product into the fabric with a brush and vacuum the surface.

Safety information:

EUH208 Contains linalool; 3,7-dimethyl-1,6-octadien-3-ol; dl-linalool, (R)-p-menth-1,8-diene; d-limonene. May cause allergic reaction.

Detergent content: < 5 % phosphates, < 5 % non-ionic surfactants, fragrances (Linalool, Limonene).

Deturner Xpert line PREPARE Surface preparation agent
Prepare the surface for applying wax, ceramic or other coating by cleaning it completely. Correctly selected additives, including alcohols, will remove residual polishing pastes, greases, waxes and silicones.
Recommended for checking the final quality also on soft varnishes. Increases the bond between the surface and any type of coating.

Usage:

Spray thoroughly on the microfiber and then spread over the entire surface you want to clean.
Wait and then wipe off the excess product with dirt with an appropriate microfibre.
The product can also be sprayed directly on the surface and the excess can be wiped off with an appropriate microfiber.

Removes and destroys various odors and unpleasant aromas in car interiors

N0 Odor is an innovative car interior odor eliminator and remover that effectively and quickly rids the car interior of unpleasant odors. Its special formula breaks down and breaks down organic dirt, which is often the source of unpleasant odors. The product contains enzymes that help in this process and are protected by a patent.

After cleaning, when the surfaces come into contact with moisture again, the molecules in the product "reactivate", ensuring a long-lasting effect and a disinfected environment. It doesn't just mask odors, it actually kills them. In addition, it gives a pleasant aroma to the car interior.

The average amount of use is 40 ml per car. It works effectively against smoke, pet odors, moisture, food residue and urine, ensuring a fresh and clean car environment.

The product is safe for various surfaces and has a pH level of 9.5

Follow these steps to remove bad odors from your car with N0 Odors:

1. Spray the product directly on the surfaces to be cleaned - mats, seats, floors, etc
2. Spray the product evenly
   
3. Wait until the product dries - do not rub into fabrics! ( If using on skin or hard surfaces such as plastic, spray and wipe with a damp cloth.)
4. If necessary, apply a second application after the surface has dried, especially if the odor is persistent.

Use the product in its pure form, without dilution. Especially if the odors are on fabrics and particularly persistent (eg milk or urine), spray more product, wait 5 minutes and wipe the surface with a clean, damp cloth.

An effective and efficient product for use as a car shampoo or active acidic pH foam, ideal for the care of lacquers protected by coatings and waxes. It softens dirt and effectively dissolves atmospheric and lime deposits. It perfectly cleans the pores of the coatings and allows the hydrophobic properties to remain longer.

1. As a foam, use a dilution of 1:8 to 1:14 in the foam sprayer under the high pressure washer, 30 ml per 1 liter of water in the hand foam sprayer.

2. As a shampoo, prepare a 1:200 solution (50 ml per 10 l of water) and lather with a strong jet of water.

3.Wash the car from top to bottom with a soft mitt. Rinse and dry the car thoroughly.

Piece/Pack: 3
Dimensions: 350,00 x 350,00 mm
Weight: 10g (net 10g)
Details: 2 x dark grey and light grey
Warranty (months): 12

FX PROTECT WHEEL-G B-2 GRAPHENE COATING

Packageīmeet the new superhydrophobic carbonļa-ceramic compound pārklājumu and lift your carsīyour car's drive protectionīfullīfully newā līmenī!

PCHARACTERISTICS

• Resistant to extremely high temperatures (up to 850°C)
• Bonded to graphene
• Durability up to 2 years
• Creates a thick protective layer on the treated surface
• Impressive colour saturation
• Provides excellent durability and physical resistance
• Protects against dirt and harmful weather conditions
• UV protection
• Fills small imperfections in the paint surface
• Improves slipperiness
• Improves paint clarity

APPLICATIONSURFACE

• All disc types: aluminium, painted, chrome, unpainted aluminium
• Brake calipers
• Blowers

Before first use, test the application of the product on a less visible surface. Improper application may cause unavoidable damage to the surface.

TECHNICAL DATA

APPLICATION METHODS

Chemical cleaning is required before application.

Application instructionsInstructions:

• Clean the surface with a degreasing fluid (we recommend FX PROTECT SURFACE AGENT).
• Shake well before application.
• Apply suede microfibre to applicator (included)
• Apply a few drops of the coating on the prepared applicator
• Apply evenly to small surfaces
• Remove* product residue with a clean microfibre (clean-up time may vary from 30- 60 seconds depending on conditions)
• Using a second microfibre, lightly buff the surface to a gloss

* remember to remove excess product at the right time. If left for too long it will crystallise and can be very difficult to remove.

Recommendation:

We recommend using a short fluff of quality microfibre:

• ROYAL CORAL/POLAR WHITE 320gsm
• MYSTIC BLUE 350gsm
• BLUE SKY 500gsm

Safety Information:

Signal word: DANGER! Contains: xylolsm Cyclosilazanes, di-Me, Me hydrogen, polymers with di-Me, Me hydrogen silazanes, reaction products with 3-(triethoxysilyl)-1-propanam 3-aminopropyltriethoxysilane.

Hazard statements:

H226 Flammable liquids and vapours. H314 Causes severe burns to skin and eye. H412 Harmful to aquatic organisms with long-lasting effects. H302+H312+H332 Harmful if swallowed, in contact with skin or in respiratory tract.

Indications of safety requirements:

P101 If medical advice is required, relevant information is given on the packaging or label. P102 Keep away from children. P280 Use protective gloves/protective clothing/eye protection/face protection. P301+P330+P331 IN CASE OF DANGER: Rinse mouth. DO NOT induce vomiting. P303+P361+P353 IN CONTACT WITH SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with water or shower. P305+P351+P338 CONTACT WITH EYES: Rinse gently with water for several minutes. Remove contact lenses if they are inserted and if this can be easily done. Continue rinsing. P310 Contact a doctor immediately. P501 Dispose of contents/container by handing over to person responsible for disposal or returning to supplier.

GTECHNIQ C5 WHEEL ARMOUR

C5 Wheel Protection offers the best protection for wheels, repelling brake dust and other dirt, making them easier to maintain.

Thanks to C5's unique, exceptionally fine surface rheology and chemical bonding mechanism, its performance is second to none. These properties give the coating excellent resistance to stains and dirt, while the chemical bond formed between the wheel surface and C5 makes the coating extremely durable.

C5 retains its integrity up to temperatures of 600°C, making it suitable for all parts of a car's rims and brake calipers.

Instructions for use:

1. Ensure wheels are clean and dry before application.
2. Clean each wheel with GtechniqPanel Wipe before application - this will ensure the best adhesion. Be careful with wheel repairs as this can damage the paintwork.
3. Shake the bottle well before use and wear gloves.
4. Wet the supplied AP1 lint free applicator with a few drops of the product and apply the coating to the disc surface - no more than ½ disc at a time.
5. After application, buff off any residue with the MF1 ZeroR Microfibre Polishing Cloth within 30-60 seconds.
6. Repeat the process for all wheels.
7. Allow the coating to cure indoors for 12 hours before exposing it to the environment.
8. Suitable for gloss, satin and matt finish wheels.
9. Suitable for chrome surfaces but not for polished metals.
10. Store in a cool, dry place.
11. Use within 3 months after opening.

Aquapel Glass Treatment is a nano-coating for car windows, developed using state-of-the-art technology. Unlike traditional glass waxes that form a superficial coating, Aquapel chemically bonds to the glass surface, becoming part of it and providing up to six times more durability.

Aquapel coating makes the glass highly water-repellent, improving wiper performance, reducing water and dirt adhesion and ensuring excellent visibility even in rainy and dark driving conditions.

- 34% better visual perception

- 25 m shorter stopping distances

(Data from official studies conducted at the University of Michigan.)

- 100% genuine product from the USA

- Product comes in individual packaging

- The disposable applicator is designed to treat one windscreen or two side windows.

DETURNER X-LINE TYRE & RUBBER CLEANER

Product for cleaning tyres and rubber parts such as seals and rubber mats. It effectively removes all types of stubborn dirt, including greasy stains and oils. The product gives tyres a clean appearance. It degreases the surface and prepares it for the application of the coating, prolonging its effect.

Wear protective gloves.

Apply the product to the wet surface and leave for one minute.

Brush or brush on.

Rinse thoroughly with water.

Apply to a cold surface in a shaded area. Do not allow to dry.

Weight: 130g (net 130g)
Information: Includes cleaning tool, installation tool and 5 patches.
Warranty (months): 12
Packing dimensions: 150 x 30 x 250 mm (W x H x D)

Piece/pack: 3
Weight: 440g (net 440g)
Information: w. extension bar
Warranty (months): 12

BadBoys Ceramic Hydro Wax -
Powerful concentrated Hydro Wax. Safe to use on all types of paints and car bodies. Does not harm previously applied protective coatings.

Features:

- Protects

- Helps dry the surface faster

- Gloss

- Makes the surface slippery, so the car will stay clean longer

- Gives a hydrophobic effect

- Pleasant masculine fragrance

Especially recommended for automatic and hand car washes.

Concentration: Recommended up to 1:100 (very good hydrophobic effect) For surface drying 1:200 up to 1:500