VEVOR two-speed SPA pump, 56 frame, 1900 W high mode: 43 m³/h with a 18 m head or 450 W low mode 21.5 m³/h with a 4.4 m head, 2″ connection with a 90° swivel joint, TÜV certified

Features and Details

Standard pump model: The 56-frame motor is suitable for replacing OEM models. The kit includes two 2-inch (5.6 cm) connectors, ensuring compatibility with various spa tubs. Note: The selection of a spa pump is based on input power, not output power—check the specifications of your existing pump before purchasing.

Two-speed design: To better adapt to real-world applications, the pump has two operating modes — high speed at 1,900 W (flow rate 43 m³/h) and low speed at 450 W (airflow 21.5 m³/h). Power is provided by a pure copper-wound motor with anti-slip bearings that precisely control the impeller speed. Each motor has passed an 80,000-cycle electrical endurance test, ensuring stable, long-term operation.

Leak Protection: The SPA pump uses fluororubber shaft seals that are resistant to high temperatures, corrosion, oils, and aging, ensuring a reliable seal even under demanding operating conditions. This effectively prevents the leakage of liquids and particles, allowing you to enjoy massage modes without worry.

90° swivel connection: The SPA pump head and connection can be rotated 90° simply by unscrewing the fasteners. This allows for easy adjustment of the installation angle for tight spaces or non-standard mounting requirements, simplifying pipe connections and facilitating future maintenance.

Safe operation: For added safety, a high-precision thermal protection system with fast response and low power consumption is integrated to continuously monitor the motor's temperature. If the set limit is exceeded, the system automatically cuts off the power, protecting the motor from damage and ensuring safe operation.

This SPA pump for whirlpool baths features a two-speed design — a high setting at 1900 W and a low setting at 450 W. The included Ø50 mm inlet and outlet connections are precisely compatible with existing spa systems. The pure copper motor, which has passed an 80,000-cycle electrical endurance test, combined with anti-slip bearings, ensures smooth, stable, and long-lasting operation.

To better suit real-world applications, the pump has two operating speeds — a high setting of 1900 W (flow rate 43 m³/h) and a low setting of 450 W (airflow 21.5 m³/h). The motor is equipped with anti-slip bearings and has passed an 80,000-cycle electrical endurance test, ensuring stable and long-lasting operation.

Leak protection is essential for SPA pumps used in whirlpool baths, which is why fluororubber shaft seals are used—they are resistant to high temperatures, corrosion, oils, and aging. They ensure a reliable seal even under demanding operating conditions and effectively prevent fluid leaks.

This SPA pump for whirlpool baths is equipped with Texas Instruments thermal protection, which ensures high precision, fast response, and low energy consumption. If the motor temperature exceeds the set limit, the system automatically cuts off the power supply, protecting the motor from damage.

• Before installation and use, carefully read and follow all instructions.

• Connect only to protected electrical circuits.

• Suitable for permanently installed pools.

• After installation, seal all connections and fasteners tightly.

• In the event of unusual behavior, perform the inspection only after the power has been turned off.

Product Specifications

• Model Number: HDP2200II

• Connection rotation angle: 90°

• Speed type: two-speed

• High setting (power / airflow / lift): 1900 W / 43 m³/h / 18 m

• Low setting (power / flow / lift): 450 W / 21.5 m³/h / 4.4 m