Ūdens pumpji un aksesuāri

Features and Information

Durable material: The freshwater pump is made of high-strength polypropylene, which is water-resistant and wear-resistant, ensuring a long service life. Inlet and outlet connections: 1/2 NPT.

Excellent performance: The diaphragm water pump provides a smooth and steady flow with a rated capacity of 11 l/min. The 12-volt pump has low power consumption, ensuring energy-efficient operation.

Removable filter: The set includes a removable filter that is easy to install and protects the pump from debris. The transparent design makes it easy to see when the filter needs to be cleaned.

Safety Measures: The pump is equipped with a built-in check valve that prevents backflow. In addition, it features built-in thermal protection and automatic pressure protection for safe use.

Wide range of applications: A lightweight and portable water pump, suitable for sprinklers, garden irrigation systems, boat water taps, campers, RVs, car washing, and garden irrigation.

Features and Information

Hot water is always available: A specially designed hot water circulation system ensures that hot water is available throughout the home—whether for your morning shower or for washing dishes in the kitchen. Forget about waiting and discomfort.

Quiet and powerful airflow: The circulation pump provides a maximum water flow of up to 38 l/min, a pressure of up to 0.6 bar, and a head of up to 6.6 m. The heat-resistant PPO impeller and 304 stainless steel pump head ensure exceptionally quiet operation — a noise level of approximately 3 dB, ensuring comfortable and undisturbed use.

Hot water in half the time: An electric water circulation pump with a programmable timer allows you to set the pump's operating times. This reduces wait times, prevents unnecessary hot water consumption, and helps lower water costs, providing a more efficient and environmentally friendly solution.

Quick and easy installation: Installation requires only a wrench to connect the DN20 inlet/outlet hose using the DN15 adapter. Once installed, continuous hot water circulation is ensured in all weather conditions. Important: After installation, the shaft must be in a horizontal position.

Without backflow: The built-in check valve separates the hot water from the cold water line, allowing both hot and cold water to be used at the same time. Brass fittings and a water shut-off valve ensure a clean, safe, and reliable water supply without leaks or corrosion.

Features and Information

Portable water pump: This cordless submersible water pump offers complete mobility and is compatible with DEWALT 20 V / 4 A batteries (not included). Suitable for use at home, while camping, or in the garden, allowing you to pump water anywhere without a power connection.

Powerful performance: Equipped with a brushless copper-core motor capable of up to 16,500 rpm, the pump delivers a maximum flow rate of up to 33 L/min and a head of up to 20 m. Suitable for draining swimming pools, watering gardens, and other water pumping tasks.

3-mode timer: Built-in adjustable timer with 5-, 10-, and 15-minute intervals that automatically turns off the pump after the set time. This improves ease of use, reduces energy consumption, and prevents unnecessary operation.

Adjustable hose holder: The adjustable hose hook securely holds the hose in place, preventing it from slipping during use. This ensures a steady flow of water without leaks or mess.

Clean water flow: The built-in filter at the bottom effectively traps dirt and particles, ensuring a clean water supply. The removable filter makes maintenance easier and extends the service life of the cordless water pump.

Features and Information

Efficient water pumping: Enjoy precise and efficient water control with the VEVOR 12 V DC water pump, rated at 75 W. It delivers a flow rate of up to 23 l/min and a head of up to 14 m.
Notes:

1. The pump is intended for short-term use—it is recommended that each operating cycle not exceed 2 hours.

2. The standard motor operates at high RPM and produces significant noise; it is recommended to wear hearing protection.

Stable operation: The flat base design, with a larger contact area, ensures stability during operation, preventing the pump from slipping or tipping over.

Resistance to wear and corrosion: The pump is made of a durable aluminum alloy that is lightweight, wear-resistant, and designed for long-term use. The electrostatic coating ensures a smooth surface and protection against dirt and corrosion. The carrying handle makes it easy to transport.

Complete set: The portable electric pump is equipped with a power switch and battery terminals, ensuring convenient use even outdoors. The set includes a 183 cm suction hose, a water intake strainer, and a spare impeller. Suitable for draining aquariums, swimming pools, and flooded areas, as well as for watering the garden.

Instructions for Use: Before using the pump for the first time, fill the inlet with water to fully submerge the impeller. Do not operate the pump in water, and ensure that the water source does not contain large particles of debris. Do not allow the pump to run dry. Turn off the pump when the water level drops below 3 mm.

Features and Information

High-efficiency cleaning power: The high-pressure washer’s pump delivers water pressure of up to 214 bar and a maximum flow rate of 9.5 l/min, allowing you to quickly tackle a variety of cleaning tasks—from household to commercial use. (Recommended operating pressure: 179 bar, to extend service life.)

Wide compatibility: Designed for engines with a 22 mm (7/8″) vertical shaft and front exhaust. The pump is compatible with most 180–196 cm³ engines with a power output of approximately 4.8–5.2 kW and a standard SAE bolt pattern, ensuring a simple and efficient replacement.

Complete set of accessories: The spare pump kit includes 5 nozzles for various cleaning tasks, as well as 1 nozzle cleaning needle, 1 siphon tube, 2 shaft wedges, 3 M8 flat washers, and 3 sets of M8 hex screws and nuts.

Maintenance-free design: The replacement pump for the high-pressure washer is equipped with a maintenance-free crankshaft housing that does not require oil changes. Suitable for pressure washers with an operating pressure of 172–207 bar and a flow rate of 9.5 l/min, ideal for cleaning walls, fences, sidewalks, vehicles, and other surfaces.

Sturdy and durable construction: The pump housing is made of cast aluminum, which ensures high resistance to corrosion and wear. The design is intended for reliable operation for up to 150 hours of continuous use, ensuring stable and long-lasting performance.

Features and Information

Always crystal-clear pool water: This high-performance sand filter provides a flow rate of up to 14.8 m³/h, ensuring even water circulation and fast cleaning. Enjoy fresh and clear pool water without having to wait for the filtration process to finish.

A design intended for long-term use: The sand filter is made of a corrosion-resistant polymer material that is resistant to rust, impact, and adverse environmental conditions. It reliably withstands rain, sun, and freezing temperatures during the winter, ensuring a long service life without frequent replacement.

7 modes, easy to use: The sand filter for above-ground pools offers 7 simple modes: filtration, backwash, rinse, recirculation, drain, winter mode, and off mode. For optimal filtration performance, it is recommended to use silica sand with a grain size of 0.5–0.8 mm.

Easy maintenance and installation: The filter is designed for easy maintenance. The drain plug slows the flow of water, preventing freezing and making maintenance easier in the winter. The 38 mm inlet and outlet connections ensure quick and easy installation.

Suitable for all pool needs: This pool's sand filtration system is versatile and compatible with all above-ground and in-ground pools, including backyard pools, indoor villa pools, and pools at sports facilities and hotels.

Features and Information

A clean and clear pool: Tired of sand in your pool? The VEVOR sand filter provides an effective solution. A maximum flow rate of up to 12.5 m³/h improves water clarity and ensures optimal filtration. Its ability to quickly treat the entire volume of pool water lets you enjoy a safe and refreshing swim free of sand and other contaminants.

Durable construction: The sand filter for an in-ground pool is made of a durable, corrosion-resistant polymer material that ensures a long service life. Designed for reliable operation in all weather conditions, it is an effective and economical filtration solution.

7-position multi-port filter: The filter offers 7 operating modes: filtration, backwashing, rinsing, recirculation, drainage, winter mode, and shut-off mode, making maintenance exceptionally simple. For optimal performance, it is recommended to use filter sand with a grain size of 0.5–0.8 mm.

Easy maintenance and installation: The drain plug facilitates maintenance during the winter, allowing water to slowly drain from the pipes and preventing freezing. The sand filter tank is equipped with threaded connections and 38 mm inlet/outlet ports, ensuring easy installation. The kit includes easy-to-follow instructions for quick installation.

Suitable for a variety of needs: The VEVOR sand filter is suitable for both residential and commercial use. It is compatible with various above-ground and in-ground pools, including backyard pools, indoor villa pools, and pools at sports centers and hotels.

Features and Information

A clean and clear pool: Tired of sand in your pool? The VEVOR sand filter provides an effective solution. With a maximum flow rate of up to 10.2 m³/h, it improves water clarity and ensures optimal filtration. The filter can quickly process the entire volume of pool water, ensuring a safe and enjoyable swimming experience free of sand and other impurities.

Durable construction: This in-ground pool sand filter is made of durable, corrosion-resistant polymer material, ensuring a long service life. Designed for reliable operation in various weather conditions, it is an effective and economical filtration solution.

7-position multi-port valve: The filter has 7 operating modes: filtration, backwashing, rinsing, recirculation, drainage, winter mode, and standby mode, which significantly simplify maintenance. For optimal performance, it is recommended to use filter sand with a particle size of 0.5–0.8 mm.

Easy maintenance and installation: The drain plug facilitates maintenance in the winter by allowing water to gradually drain from the pipes and preventing freezing. The filter tank is equipped with threaded connections and 38 mm inlet/outlet ports, ensuring easy installation. The kit includes clear instructions for quick assembly.

Suitable for a variety of needs: The VEVOR sand filter is suitable for both residential and commercial use. It can be used for above-ground and in-ground pools, including backyard pools, indoor villa pools, and pools at gyms and hotels.

Features and Details

A Crystal-Clear Pool Without the Hassle
Tired of sand and dirt in your pool? The VEVOR sand filter, with a maximum flow rate of 132 l/min, improves water clarity and ensures optimal filtration. Thanks to its ability to quickly circulate all the water in the pool, you can enjoy a safe and refreshing swim free of sand and other contaminants.

Durable Construction
This sand filter for in-ground pools is made of durable, corrosion-resistant polymer materials that ensure a long service life and reliable performance. It is designed for reliable performance in all weather conditions and is an effective, economical solution for your filtration needs.

7-Position Multifunctional Filter The sand filter is equipped with 7 modes: filtration, backwash, rinse, recirculation, drain, winterization, and standby mode. This functionality significantly simplifies maintenance and allows you to adapt operation to various situations. For optimal performance, it is recommended to use filter sand of fraction 20.

Easy Maintenance and Installation
The drain plug facilitates maintenance during the winter by allowing water to slowly drain from the pipes and reducing the risk of freezing. The filter tank is equipped with threaded connections and 38 mm inlet/outlet ports, ensuring quick and easy installation. Clear installation instructions allow you to install the filter in just a few minutes.

Wide Range of Applications
The VEVOR sand filter is suitable for both residential and commercial use. It is compatible with various above-ground and in-ground pools, including backyard pools, indoor villa pools, gym pools, and hotel pools.

Features and Details

1,100 GPH high flow rate – The automatic sump pump is equipped with a high-performance copper-wound motor rated at 6,600 rpm, an efficient, clog-resistant impeller, and a 29 mm diameter discharge. This ensures rapid water drainage at a rate of up to 69 l/min, with a lift height of up to 4 m.

Automatic On/Off – When the brown-and-white wire is connected to the battery’s positive terminal (+) and the black wire to the negative terminal (−), the pump operates in automatic mode. It turns on when the water level rises to 40–50 mm above the filter base and turns off when the level drops to 20–30 mm above the base.

High-quality motor – Copper windings ensure good conductivity, while the stainless steel shaft provides corrosion resistance. The motor operates quietly and efficiently, and its sealed, waterproof housing provides additional protection. Insulation class B ensures reliable operation even under prolonged loads.

Durable and long-lasting design – The automatic boat bilge pump is equipped with a pressure-resistant and corrosion-resistant ABS747 waterproof housing, a reinforced switch, a clog-resistant filter base, and a non-clogging impeller, ensuring reliable operation in a variety of conditions.

Wide Range of Applications – This bilge pump, featuring fast and continuous water drainage and an automatic on/off function, is suitable for fishing boats, kayaks, and motorboats to prevent excessive flooding of the hull and ensure the safety of personnel, equipment, and cargo. It is also suitable for basements as a backup pump for draining rainwater.

Features and Details

3,000 GPH flow rate – The automatic bilge pump is equipped with a high-performance copper-wound motor rated at 3,300 rpm, an efficient, clog-resistant impeller, and a 40-mm-diameter discharge port. This ensures rapid water drainage at a rate of up to 189 l/min, reaching a distance of up to 5.5 m.

Automatic On/Off – When the brown wire is connected to the battery’s positive terminal (+), the pump operates in automatic mode. When the water level rises 30 cm above the filter base, the pump automatically begins draining the water.

High-quality motor – The motor is manufactured with copper windings for better conductivity and a stainless steel shaft for enhanced corrosion resistance. It operates quietly and efficiently, while the sealed, waterproof motor housing provides additional protection. Insulation class B ensures reliable operation even during prolonged use.

Durable and long-lasting design – The automatic sump pump is equipped with a pressure-resistant and corrosion-resistant ABS747 waterproof housing, a reinforced switch, a clog-resistant filter base, and a non-clogging impeller. This design ensures reliable operation under a variety of conditions.

Wide Range of Applications – This bilge pump with continuous and automatic water drainage is suitable for fishing boats, kayaks, and motorboats to prevent excessive flooding of the hull and ensure the safety of personnel, equipment, and cargo. It is also suitable for basements as a backup sump pump for rainwater drainage.

Features and Details

High-Flow Pump – This pump for the boat’s live fish tank provides a water flow of up to 32 l/min, increasing the oxygen supply to the fish and ensuring the long-term viability of the fish and bait in the tank.

Easy Installation – The straight-tube design allows the aerator pump to be mounted on the bottom or side of the boat’s hull. Installation is quick and easy, requiring minimal tools and skills. Instructions are included in the kit.

Durable ABS Housing – The boat bilge pump is made of high-strength ABS material and is fully submersible in both saltwater and freshwater. High corrosion resistance ensures long-lasting performance.

Dual-intake design – Equipped with two intake ports, this marine aerator pump allows you to connect various water supply hoses, ensuring effective water circulation in a live fish tank with a single pump.

Easy maintenance – The aerator pump features a quick-release design for removing the motor, which simplifies both installation and regular cleaning.

Features and Details

High-Flow Pump – This pump for the boat’s live fish tank provides a water flow of up to 50 l/min, maximizing oxygen supply to the fish and ensuring the long-term viability of both fish and bait in the tank.

Easy installation – The straight-tube design allows the aerator pump to be mounted on the bottom or side of the boat’s hull. Installation is quick and easy, requiring minimal tools and skills. Instructions are included in the kit.

Durable ABS Housing – The boat bait tank pump is made of high-strength ABS material and is fully submersible in both saltwater and freshwater. Excellent corrosion resistance ensures long-lasting performance.

Dual-intake design – Equipped with two intake ports, this marine aerator pump allows you to connect various water supply hoses, ensuring effective water circulation in a live fish tank with a single pump.

Easy maintenance – The aerator pump features a quick-release design for removing the motor, which simplifies both installation and regular cleaning.

Features and Details

High-Flow Pump – This boat livewell pump provides a water flow of up to 69 l/min, increasing the oxygen supply to the fish and ensuring the long-term viability of fish and bait in the tank.

Easy Installation – The straight-tube design allows the aerator pump to be mounted on the bottom or side of the boat’s hull. Installation is quick and easy, requiring minimal tools and skills. Instructions are included in the kit.

Durable ABS Housing – The Laivas baitwell pump is made of high-strength ABS material and is fully submersible in both saltwater and freshwater. High corrosion resistance ensures long-lasting performance.

Dual-inlet design – Equipped with two inlet ports, the pump allows for the connection of various water supply hoses, ensuring efficient water circulation in the fish tank with a single pump.

Easy maintenance – The aerator pump features a quick-disconnect design that allows for easy removal of the motor, making installation and regular cleaning faster and more convenient.

Features and Details

Contemporary vintage style – This hand-operated well pump features a classic retro design suitable for use in ponds, wells, gardens, campsites, backyards, farms, and parks. It is both decorative and practical, and when not in use, it serves as an attractive garden accent.

Efficient Water Pumping – Designed for shallow wells, this cast-iron hand pump can lift water from depths of up to 6 m. Suitable for most groundwater levels. Works without electricity—just set it up and start using it.

Durable cast iron construction – Made of cast iron with a rust-resistant coating, ensuring a long service life. The reinforced tube can withstand an impact load of up to approximately 9 kg and is suitable for use in rain, snow, heat, and cold.

Ergonomic handle – The ergonomic handle is contoured to fit the palm, ensuring smooth and effortless pumping even during repeated use. The hook-shaped spout design allows you to hang the bucket securely without splashing.

Easy installation – Equipped with a standard 32 mm NPT connection. Installation takes only 2–3 minutes using a screwdriver. After installation, simply move the handle up and down to get water on demand.

Features and Details

Contemporary vintage style – This hand-operated well pump features a classic retro design, making it suitable for use in ponds, wells, gardens, campgrounds, backyards, farms, and parks. It is both decorative and practical, and when not in use, it serves as an attractive garden accent.

Efficient Water Pumping – Designed for shallow wells, this cast-iron hand pump can lift water from depths of up to 6 m. Suitable for most groundwater levels. Works without electricity—just set it up and start using it.

Durable cast iron construction – Made of cast iron with a rust-resistant coating, ensuring a long service life. The reinforced pipe can withstand an impact load of up to approximately 9 kg and is suitable for use in rain, snow, heat, and cold.

Ergonomic handle for easier use – The ergonomic handle is contoured to fit the palm, ensuring smooth and effortless pumping even during repeated use. The hook-shaped spout design allows you to hang the bucket securely without splashing.

Easy installation – Equipped with a standard 32 mm NPT connection. Installation takes only 2–3 minutes using a screwdriver. After installation, all you have to do is move the handle up and down to get water on demand.

Features and Details

Antique water pump stand – The hand pump stand is 66 cm tall, which increases the pump’s overall height and allows the well water pump to be used in a more comfortable working position.

Cast iron construction – The tripod is made of cast iron; the tubing has a wall thickness of 8 mm, ensuring high strength and stability. The surface is coated with a protective layer of paint to prevent rust and corrosion. The stand weighs 13.5 kg.

Easy Installation – The well water pump stand is easy to assemble and disassemble. The top and bottom sections have pre-drilled mounting holes. All you need is a screwdriver, and the process takes 2–3 minutes.

Sturdy Construction – The tripod features a lighthouse-shaped design capable of withstanding heavy loads from above. The flared base evenly distributes pressure at both the top and bottom, absorbs shocks, and increases stability.

Versatile Use – Thanks to its vintage look and well-thought-out design, the hand pump stand is suitable for use in family ponds, yards, and gardens, adding a unique touch to the surroundings.

Features and Details

Antique Hand-Operated Water Pump – The pump features a high water flow rate and is easy to use; its maximum pumping depth reaches 6 m, which fully meets everyday watering needs. The ergonomic handle allows you to get the pump ready for use quickly and efficiently. The retro and rustic design adds a distinctive touch to your garden.

Stable pump stand – The hand pump stand is 66 cm tall, which increases the pump’s overall height and allows it to be used in a more comfortable position, without having to bend over or squat.

Cast iron construction – The well water pump and stand are made of cast iron; the pipe walls are 8 mm thick, ensuring high strength and stability. The surface is coated with a protective layer of paint to prevent rust and corrosion.

Easy Installation – The well water pump is easy to assemble and disassemble. The kit includes mounting screws; all you need for installation is a screwdriver, and the process takes 2–3 minutes.

Versatile Use – Thanks to its vintage look and effective pumping function, this hand pump with a stand is suitable for use in family ponds, backyards, and gardens, adding a unique touch to the surroundings.

Features and Details

Contemporary vintage style – This hand-operated well pump features a classic retro design, making it suitable for use in ponds, wells, gardens, campgrounds, backyards, farms, and parks. Both decorative and practical—when not in use, it serves as an attractive garden feature.

Efficient Water Pumping – Designed for shallow wells, this pump can lift water from depths of up to 7.6 m. Suitable for most groundwater levels. Works without electricity—just install it and start using it.

Durable cast iron construction – Made of cast iron with a rust-resistant coating, ensuring a long service life. The reinforced tube can withstand an impact load of up to approximately 9 kg and is suitable for use in rain, snow, heat, and cold.

Ergonomic handle – The ergonomic shape of the handle is designed to fit the palm, ensuring smooth and effortless pumping even during prolonged use. The hook-shaped spout design allows you to hang the bucket securely without spilling.

Easy installation – Equipped with a standard 32 mm NPT connection. Installation takes only 2–3 minutes using a screwdriver. After installation, simply move the handle up and down to get water as needed.

Features and Details

Powerful shredder pump: The sewage pump is equipped with a 500-watt copper motor, which ensures high performance and a long service life. With a maximum lift height of up to 8 m and a maximum flow rate of up to 6,600 l/h, it is ideally suited for basement wastewater systems. It collects, treats, and discharges sanitary wastewater without the need for extensive remodeling.

Oiled for use with hot water: The motor is filled with oil to provide protection and withstand continuous operation in water at 75 °C or for up to 4 hours in water at 90 °C. Enhanced heat resistance ensures greater durability and a longer service life.

Effective antibacterial protection: A specially designed silver-ion water tank provides up to 99% inhibition efficiency, effectively preventing the formation of unpleasant odors. The grinder pump is maintenance-free.

Well-thought-out design: The macerator pump is equipped with four shock-absorbing mounts that reduce noise levels during operation. The built-in check valve prevents fluid backflow without the need for an external check valve. An improved seal design ensures better leak-tightness.

Suitable for various rooms: The VEVOR toilet sewage pump is compact and suitable for shallow installation locations, including behind the toilet. Three built-in water inlets allow for connection to a bathtub, shower, laundry sink, kitchen sink, or other plumbing fixtures.

Features and Details

ANTIQUE WATER PUMP STAND – The stand for the hand pump is 66 cm tall, which raises the height of the corresponding hand pump and makes it easier to use the well pump.

CAST IRON MATERIAL – The stand is made of cast iron; the wall thickness of the stand’s tubes is 8 mm, ensuring strength and stability. The surface is coated with paint to protect against rust and corrosion. The stand weighs 15.5 kg.

EASY INSTALLATION – The well water pump stand is easy to assemble and disassemble. There are pre-drilled holes at the top and bottom. All you need is a screwdriver, and installation takes 2–3 minutes.

STABLE CONSTRUCTION – The tripod features a lighthouse-shaped design capable of withstanding heavy loads from above. The flared base at the bottom and top evenly distributes pressure, absorbs vibrations, and increases stability.

WIDE RANGE OF USES – Thanks to its vintage look and well-thought-out design, the hand pump stand is suitable for use in family ponds, backyards, and gardens, adding a unique touch to the surroundings.

Features and Details

Classic vintage style: This manual well pump features a classic retro design and is suitable for use in ponds, wells, gardens, campgrounds, backyards, farms, and parks. It is both a practical and decorative solution and serves as an aesthetic garden feature when not in use.

Efficient Water Pumping: Designed for shallow wells or wellheads, this cast-iron hand pump can lift water from a depth of up to 7.6 m. Suitable for most groundwater levels. No electricity required—just set it up and start pumping.

Durable cast iron construction: Made of cast iron with an anti-corrosion coating, the pump is designed for long-term use. The reinforced hose can withstand impacts of up to 9.1 kg, as well as harsh outdoor conditions—rain, snow, heat, and cold.

Ergonomic handle: The handle is contoured to fit the curve of the palm, ensuring smooth and effortless operation even during repeated use. The hook-shaped spout design allows you to hang the bucket securely without spilling.

Easy installation: Equipped with a standard 1¼" NPT connection, this manual water pump can be installed in 2–3 minutes using only a screwdriver. Once installed, simply move the handle up and down to draw water as needed.