VEVOR two-speed SPA pump, 48 frame, 1100 W high mode 35 m³/h with a 13 m head or 250 W low mode 14 m³/h with a 2.8 m head, Ø50 mm connection with a 90° swivel joint, TÜV certified

Features and Details

Standard pump model: The 48-frame motor is suitable for replacing OEM models. The set includes two Ø50 mm (5.6 cm) connectors, ensuring compatibility with various spa tubs. Note: The selection of a spa pump is based on input power, not output power—check the specifications of your existing pump before purchasing.

Two-speed design: To better suit real-world applications, the pump has two operating modes — a high mode at 1,100 W (flow rate 35 m³/h) and a low mode at 250 W (flow rate 14 m³/h). Power is provided by a pure copper-wound motor with anti-slip bearings that precisely control the impeller speed. Each motor has passed an 80,000-cycle electrical endurance test, ensuring stable, long-term operation.

Leak Protection: The SPA pump uses fluororubber shaft seals that are resistant to high temperatures, corrosion, oils, and aging. They maintain a stable seal even under demanding operating conditions and effectively prevent the leakage of liquids and particles.

90° swivel connection: The SPA pump head and connection can be rotated 90° simply by unscrewing the fasteners. This makes it easy to adjust the installation angle for tight spaces or non-standard mounting requirements, simplifying pipe connections and facilitating future maintenance.

Safe operation: Integrated Texas Instruments thermal protection, featuring high precision, fast response, and low power consumption, continuously monitors the motor temperature. If the set limit is exceeded, the system automatically cuts off the power supply, protecting the motor from damage and ensuring safe operation.

This spa pump for whirlpool tubs features a two-speed design — a high setting at 1,100 W and a low setting at 250 W. The included Ø50 mm inlet and outlet connections are precisely compatible with existing spa systems. The pure copper motor, which has passed an 80,000-cycle electrical endurance test, combined with anti-slip bearings, ensures smooth, stable, and long-lasting operation.

To better suit practical use, the pump has two operating speeds — a high setting of 1,100 W (flow rate of 35 m³/h) and a low setting of 250 W (airflow 14 m³/h). The motor is equipped with anti-slip bearings and has passed an 80,000-cycle electrical endurance test, ensuring stable and long-lasting operation.

Leak protection is essential for SPA pumps used in whirlpool baths, which is why fluorocarbon shaft seals are used; they are resistant to high temperatures, corrosion, oils, and aging, maintaining a stable seal even under challenging operating conditions.

This SPA pump for whirlpool tubs is equipped with Texas Instruments thermal protection, which ensures high precision, fast response, and low energy consumption. If the motor temperature exceeds the set limit, the system automatically cuts off the power supply, protecting the motor from damage.

• Before installation and use, carefully read and follow all instructions.

• Connect only to protected electrical circuits.

• Suitable for permanently installed pools.

• After installation, seal all connections and fasteners tightly.

• In the event of unusual operation, perform the inspection only after the power has been turned off.

Product Specifications

• Model Number: HSP1100II

• Connection rotation angle: 90°

• Speed type: two-speed

• High setting (power / airflow / lift): 1,100 W / 35 m³/h / 13 m

• Low setting (power / flow / head): 250 W / 14 m³/h / 2.8 m