2.4GHz Wi-Fi routers

Description

Wireless connection up to 5 km

The RG-EST350 V2 wireless network bridge kit is designed for fast and stable data transmission over distances of up to 5 km. The two devices included in the kit are pre-paired at the factory, so a point-to-point wireless connection can be established without complicated initial configuration.

High-Speed 5 GHz Data Transmission

The 5 GHz radio with two spatial streams and 2 × 2 MIMO technology provides wireless connection speeds of up to 867 Mbit/s. The built-in 15 dBi directional antenna helps maintain a stable signal over long distances, while two Gigabit Ethernet ports enable fast connection of wired devices.

High data transfer performance

In an open environment without significant signal obstructions, the system's throughput can reach up to 230 Mbit/s at a distance of 1 km, up to 200 Mbit/s at a distance of 3 km, and up to 150 Mbit/s at a distance of 5 km. The system is suitable for connecting video surveillance cameras, buildings, production facilities, warehouses, and remote sites into a network.

Suitable for video surveillance systems

Under optimal conditions, the system supports up to 45 cameras with 2 MP resolution at a distance of 3 km, or up to 20 cameras with 2 MP resolution at a distance of 5 km. The specified performance applies to H.265 cameras with a video bitrate of approximately 3 Mbit/s and a direct line of sight between the two devices.

Easy installation

Automatic pairing allows you to start using the system once the devices have been installed, connected to the network, and powered on. The built-in signal strength LED indicators help you precisely adjust the relative positioning of the two devices to achieve the most stable connection possible.

Flexible Power Supply

Each wireless bridge device can be powered by a 24 V passive PoE power supply or a 12 V DC power supply. A PoE connection allows data to be transmitted and power to be supplied over a single network cable, making it easier to install devices outdoors.

Durable outdoor structure

The IP54 protection rating protects the devices from dust and precipitation. The V0-rated housing and an operating temperature range from −30 °C to 65 °C ensure stable operation in a variety of outdoor conditions.

Remote Management

On the cloud platform and in the mobile app, you can check the connection status of devices, signal strength, and performance statistics, as well as remotely restart devices. The built-in bridge speed test feature helps you evaluate the actual connection performance.

Specifications

Model: RG-EST350 V2
Device Type: Outdoor Wireless Network Bridge Kit
Number of devices in the kit: 2
Connection type: Point-to-point and point-to-multipoint
Operating mode: Base station/CPE
Recommended connection distance: Up to 5 km
Wi-Fi standard: Wi-Fi 5
Wireless standards: IEEE 802.11a/n/ac
Frequency band: 5 GHz
Radio configuration: Single frequency band, two spatial streams
MIMO configuration: 2 × 2 MIMO
Maximum wireless connection speed: 867 Mbit/s
Channel width: Automatic, 20, 40, or 80 MHz
Maximum transmit power: 400 mW or 26 dBm, adjustable
Transmit power adjustment step: 1 dBm
Antenna type: Built-in directional antenna
Antenna gain: 15 dBi
Horizontal coverage angle: 31°
Vertical coverage angle: 14°
Throughput at 1 km: Up to 230 Mbit/s
Throughput at a distance of 3 km: Up to 200 Mbit/s
Throughput at a distance of 5 km: Up to 150 Mbit/s
Signal strength at a distance of 1 km: −58 dBm
Signal strength at a distance of 3 km: −66 dBm
Signal strength at a distance of 5 km: −70 dBm
Number of network ports per device: 2
Network port type: 10/100/1000BASE-T
Maximum network port speed: 1 Gbit/s
Number of PoE input ports: 1
PoE power supply: 24 V/0.5 A passive PoE
DC power supply: 12 V/1 A
Maximum power consumption: 9 W
Reset button: Yes
System status LED indicators: 1
Network port LED indicators: 2
Signal strength LED indicators: 3
Protection class: IP54
Flame resistance class: V0
Operating temperature: −30 °C to 65 °C
Storage temperature: −40 °C to 70 °C
Operating humidity: 5–95%, non-condensing
Storage humidity: 5–95%, non-condensing
Average time between failures: More than 400,000 hours
Mounting type: Wall-mounted or pole-mounted
Certification: CE
Net weight of a single unit: 0.5 kg
Dimensions of a single unit without mounting bracket: 230 × 132 × 48 mm
Cloud management: Yes
Mobile app control: Yes
Automatic pairing: Yes
Self-organizing network feature: Yes
Bridge connection speed test: Yes
Remote restart: Yes
Package weight: 2.3 kg
Package dimensions: 490 × 363 × 80 mm

Package Contents

Wireless network bridge: 2 units
Mounting bracket: 2 pcs.
Mounting clamp: 2 pcs.
Universal connection hub: 2 pcs.
24 V passive PoE power adapter: 2 pcs.
Wall anchor: 6 pcs.
Screw: 8 pcs.
User manual: 1 pc.

Description

A stable wireless connection over long distances

The wireless network bridge kit consists of two factory-paired devices, so the system can be used without complicated initial configuration. It is designed for stable point-to-point or point-to-multipoint data transmission with a recommended connection distance of up to 1 km. Once power is restored, the devices automatically re-establish their connection with each other.

High-Speed 5 GHz Data Transmission

5 GHz dual-stream wireless connectivity with 2 × 2 MU-MIMO technology provides wireless transfer speeds of up to 867 Mbit/s. The manufacturer specifies a bridge throughput of up to 90 Mbit/s at a distance of 100 m and up to 80 Mbit/s at a distance of 1 km, ensuring a stable connection for video surveillance and remote network access needs.

Suitable for video surveillance systems

The kit is designed to connect video surveillance cameras, network recorders, buildings, elevators, production facilities, construction sites, and other remote locations. A 1-kilometer connection can support data transmission for up to 16 cameras with a 3 Mbit/s video stream, up to 10 cameras with a 4–5 Mbit/s stream, or up to 7 cameras with a 6 Mbit/s stream.

Durable outdoor structure

The IP54 protection rating protects the devices from dust and precipitation. The V0-rated fire-resistant housing and an operating temperature range of −30 °C to 55 °C ensure reliable operation in a variety of outdoor conditions.

Easy installation and power supply

The devices can be mounted on a wall or pole using the included mounting hardware. Power can be supplied via a 12 V DC adapter or a 24 V passive PoE connection, allowing both power and data transmission to be provided over a single network cable.

Remote Management

The system supports management via a mobile app and a cloud platform, allowing users to check network topology, connection status, and statistics; change configurations; run diagnostics; and remotely reboot devices.

Specifications

Model: RG-EST310 V2
Device type: Outdoor wireless network bridge kit
Number of devices in the kit: 2
Connection type: Point-to-point and point-to-multipoint
Recommended connection distance: Up to 1 km
Frequency band: 5 GHz
Wireless standards: IEEE 802.11a/n/ac
Wi-Fi standard: Wi-Fi 5
Radio configuration: One 5 GHz frequency band, two spatial streams
MIMO technology: 2 × 2 MU-MIMO
Channel width: Automatic, 20, 40, or 80 MHz
Maximum wireless data rate: 867 Mbit/s
Throughput at a distance of 100 m: Up to 90 Mbit/s
Throughput at a distance of 500 m: Up to 80 Mbit/s
Throughput at a distance of 1 km: Up to 80 Mbit/s
Throughput at a distance of 2 km: Up to 40 Mbit/s
Signal strength at a distance of 100 m: −52 dBm
Signal strength at a distance of 500 m: −65 dBm
Signal strength at a distance of 1 km: −68 dBm
Signal strength at a distance of 2 km: −75 dBm
Antenna type: Built-in directional antenna
Antenna gain: 10 dBi
Horizontal coverage angle: 60°
Vertical coverage angle: 30°
Maximum transmission power: 400 mW or 26 dBm, adjustable
Ethernet ports: 1 × 10/100BASE-T
PoE input ports: 1
Power supply: 12 V DC adapter or 24 V passive PoE
Power consumption: <7 W
RAM: 64 MB
Flash memory: 8 MB
Protection rating: IP54
Flammability rating: V0
Surge protection: 4 kV
Operating temperature: −30 °C to 55 °C
Storage temperature: −40 °C to 70 °C
Operating humidity: 5–95%, non-condensing
Storage humidity: 5–95%, non-condensing
Mean time between failures: >400,000 hours
Mounting type: Wall- or pole-mounted
Dimensions of a single unit: 147 × 76 × 37 mm
Net weight of a single unit: 0.35 kg
Package dimensions: 400 × 231 × 88 mm
Package weight: 1.35 kg
Network protocol: IPv4
VLAN support: IEEE 802.1Q and multi-VLAN transparent forwarding
DHCP: Client support
DNS: Client support
IP addressing: Static IP address
Wireless network security: WPA-PSK, WPA2-PSK, and WPA/WPA2-PSK
SSID hiding: Supported
WLAN QoS: WMM
DFS support: Available
Cloud management: Available
Remote access: Available
Remote reboot: Available
Statistics monitoring: Available
Diagnostic functions: Ping and TraceRoute
Operating modes: Normal, high-performance, and fault-tolerant modes
Reset button: 1
LED indicators: Connection and signal quality indicators

Package Contents

Wireless network bridge: 2 pcs.
Mounting bracket: 2 pcs.
Mounting clip: 4 pcs.
Power adapter: 2 pcs.
Wall anchor: 4 pcs.
Screw: 8 pcs.
User manual: 1 pc.

Description

Wireless connection up to 3 km

The wireless network bridge is designed to establish stable point-to-point and point-to-multipoint connections at distances of up to 3 km. 5 GHz dual-stream wireless communication with 2×2 MIMO technology provides wireless transmission speeds of up to 867 Mbit/s, while the 13 dBi directional antenna focuses the signal within a 30° horizontal and vertical angle.

Suitable for video surveillance systems

The device is equipped with three 10/100BASE-T network ports, two of which provide PoE output. This allows you to directly connect and power up to two compatible video surveillance cameras or other network devices, reducing the number of power cables and adapters required. The total PoE power reserve is up to 15.4 W.

Flexible Power Options

The wireless bridge can be powered by a 12 V DC power supply, 24 V passive PoE, or IEEE 802.3af/at PoE. The 12 V DC connection also allows the device to be used in solar-powered systems.

Stable Transmission on a Busy Network

TDMA technology efficiently allocates transmission time among connected devices, reducing data collisions and delays. The bridge supports operation in base station and CPE modes, as well as up to five point-to-multipoint connections.

Easy configuration and management

The self-organizing network feature allows compatible devices to connect quickly. Features include one-button connection, an antenna alignment tool, frequency spectrum scanning, connection status monitoring, and remote configuration via a cloud platform.

Durable outdoor structure

The IP55 protection rating protects the device from dust and precipitation. It operates at temperatures ranging from −30 °C to 55 °C and is equipped with surge and electrostatic discharge protection, ensuring reliable outdoor operation.

One device per package

This product is sold as a single wireless bridge device. To establish a point-to-point connection, two compatible wireless bridge devices are required.

Specifications

Model: RG-EST330F-P
Device type: Outdoor wireless network bridge
Number of devices per package: 1
Connection type: Point-to-point and point-to-multipoint
Operating mode: Base station/CPE
Maximum operating range: 3 km
Wi-Fi standard: Wi-Fi 5
5 GHz wireless standards: IEEE 802.11a/n/ac
2.4 GHz wireless standards: IEEE 802.11b/g/n
5 GHz radio configuration: Two spatial streams, 2 × 2 MIMO
2.4 GHz radio configuration: One spatial stream
5 GHz maximum data rate: 867 Mbit/s
2.4 GHz maximum data rate: 150 Mbit/s
Total wireless data rate: 1017 Mbit/s
5 GHz channel width: Automatic, 20, 40, or 80 MHz
2.4 GHz channel width: Automatic, 20, or 40 MHz
5 GHz maximum transmit power: 26 dBm
2.4 GHz maximum transmit power: 20 dBm
Antenna type: Built-in directional antenna
5 GHz antenna gain: 13 dBi
2.4 GHz antenna gain: 2 dBi
Horizontal coverage angle: 30°
Vertical coverage angle: 30°
Number of network ports: 3
Network port type: 10/100BASE-T
Maximum network port speed: 100 Mbit/s
Number of PoE input ports: 1
Number of PoE output ports: 2
Supported PoE standards: IEEE 802.3af/at
PoE power reserve: 15.4 W
Power supply: 12 V DC, 24 V passive PoE, or IEEE 802.3af/at PoE
DC power supply: 12 V/1 A or 24 V/1.5 A
Power consumption without PoE output: <9 W
Power consumption with PoE output: <24.4 W
Bridge throughput at a distance of 0.5 km: Up to 90 Mbit/s
Bridge throughput at a distance of 1 km: Up to 80 Mbit/s
Bridge throughput at a distance of 2 km: Up to 60 Mbit/s
Bridge throughput at a distance of 3 km: Up to 40 Mbit/s
Signal strength at a distance of 0.5 km: −54 dBm
Signal strength at a distance of 1 km: −64 dBm
Signal strength at a distance of 2 km: −71 dBm
Signal strength at a distance of 3 km: −75 dBm
Maximum number of point-to-multipoint connections: 5
TDMA support: Yes
Self-organizing network feature: Yes
One-button connection: Yes
Antenna alignment tool: Yes
Frequency spectrum scanning: Yes
Cloud management: Yes
Remote reboot: Yes
Software updates: Yes
Configuration backup and restore: Available
Network diagnostics: Ping, TraceRoute, and DNS lookup
VLAN packet forwarding: Available
DHCP server: Available
DHCP client: Available
Wireless network security: WPA2-PSK
SSID hiding: Yes
LED indicators: 1 system indicator, 3 port indicators, and 3 signal strength indicators
Reset button: Yes
Protection class: IP55
Surge protection: ±4 kV in common-mode, ±2 kV in differential-mode
Electrostatic discharge protection: 8 kV contact discharge, 15 kV air discharge
Operating temperature: −30 °C to 55 °C
Storage temperature: From −40 °C to 85 °C
Operating humidity: 5–95%, non-condensing
Storage humidity: 5–95%, non-condensing
Mean time between failures: >400,000 hours
Certification: CE
Color: White
Net weight: 0.37 kg
Product dimensions without mounting bracket: 198.8 × 102 × 53.4 mm

Description

Stable wireless connection up to 500 m

The RG-EST100-E wireless network bridge kit is designed for data transmission over distances of up to 500 m. A dual-stream 2.4 GHz connection with 2×2 MIMO technology provides wireless transmission speeds of up to 300 Mbit/s.

Suitable for video surveillance systems

A wireless bridge is suitable for connecting video surveillance cameras in locations where installing a network cable is difficult or impractical. The system supports up to 10 cameras with 3 MP resolution at a distance of 100 m, or up to 5 cameras with 3 MP resolution at a distance of 500 m.

Easy installation

The system is designed for quick point-to-point connections without the need for complex device alignment. The built-in directional antennas provide a 70° horizontal and 70° vertical coverage angle.

Durable outdoor structure

The IP55 protection rating protects the devices from dust and precipitation. The wireless bridge operates at temperatures ranging from −30 °C to 60 °C, making it suitable for installation outdoors, in buildings, in elevator shafts, and in other demanding environments.

Remote Management

The Ruijie Cloud platform allows you to monitor connection performance and statistics, as well as perform remote system maintenance. The device supports base station and CPE operating modes, network diagnostics, software updates, configuration backup, and remote restart.

Specifications

Model: RG-EST100-E
Device Type: Wireless Network Bridge Kit
Operating Mode: Base Station/CPE
Wireless Frequency Band: 2.4–2.483 GHz
Wireless Standards: IEEE 802.11b/g/n
Wi-Fi Standard: Wi-Fi 4
Spatial Streams: 2
MIMO Configuration: 2 × 2
Channel Width: Auto/20/40 MHz
Maximum wireless data rate: 300 Mbit/s
Maximum transmit power: 20 dBm
Operating range: Up to 500 m
Connection throughput at 100 m: 60 Mbit/s
Connection throughput at 500 m: 30 Mbit/s
Signal strength at 100 m: −58 dBm
Signal strength at a distance of 500 m: −68 dBm
Number of LAN ports: 2
LAN port type: 10/100BASE-T
Maximum LAN port speed: 100 Mbit/s
Power supply: 12 V passive PoE or 12 V DC connection
Supply voltage and current: 12 V/1 A
PoE output: None
Power consumption: <5 W
Reset button: Yes
System LED indicators: 1
Port LED indicators: 2
Signal strength LED indicators: 3
Antenna type: Built-in directional antenna
Horizontal coverage angle: 70°
Vertical coverage angle: 70°
Protection class: IP55
Operating temperature: −30 °C to 60 °C
Storage temperature: From −40 °C to 70 °C
Operating humidity: 5–95%, non-condensing
Storage humidity: 5–95%, non-condensing
Mean time between failures: >400,000 hours
Wireless network security: WPA2-PSK
Cloud management: Yes
SNMP support: Yes
DHCP server: Yes
DHCP client: Yes
Network diagnostics: Ping, TraceRoute, DNS
Certification: CE
Net weight of product: 0.25 kg
Gross weight of product: 0.30 kg
Dimensions of a single device: 165.5 × 68.7 × 42 mm

Package Contents

Wireless bridge device: 2 ga

Description

High-speed internet using a 4G SIM card: The router is equipped with a Nano SIM card slot and supports the 4G LTE Cat. 4 mobile network. In the EU version, the maximum download speed reaches 150 Mbit/s, while the upload speed — 50 Mbit/s, providing convenient internet access in areas where fixed broadband is not available.

Dual-band AC1200 Wi-Fi 5: The device operates simultaneously in the 2.4 GHz and 5 GHz frequency bands. The maximum wireless transmission speed is 300 Mbit/s in the 2.4 GHz band and 867 Mbit/s in the 5 GHz band. MU-MIMO technology helps serve multiple connected devices more efficiently.

Connectivity for more than 40 devices: The router is suitable for homes, offices, video surveillance systems, exhibition booths, and RVs. The manufacturer recommends connecting up to 40 devices at a time, while the maximum number of supported clients is 128.

Four Ethernet ports: Four 10/100 Mbit/s RJ-45 ports provide a stable wired connection for a TV, computer, game console, printer, or other network devices. One port can be configured as a WAN/LAN connection.

Automatic fallback to a backup internet connection: The router supports WAN, WISP, and 4G connection failover. If the primary wired or wireless Internet connection is lost, the device can automatically switch to the next available connection source.

Cudy Mesh network support: The device can be used as a Cudy Mesh main router and connected to other compatible Cudy devices. Both wireless and wired Mesh connections are supported, allowing you to extend Wi-Fi coverage in your home or office.

Extensive VPN features: The built-in VPN server and client support the WireGuard, OpenVPN, IPsec, ZeroTier, PPTP, and L2TP protocols for secure remote connections to your home or corporate network.

Safety and Parental Controls: WPA, WPA2, and WPA3 encryption help protect your wireless network. Parental control features allow you to create user profiles, set internet usage schedules, temporarily suspend the connection, and filter websites.

Management via an app and cloud service: The router can be managed locally via a web browser or the Cudy app. It also supports remote cloud management, online firmware updates, and network performance monitoring.

Flexible installation: Its compact design makes it suitable for placement on a table or mounting on a wall. Two fixed cellular network antennas and two Wi-Fi antennas help ensure stable signal reception and transmission.

Product Specifications

Model: LT500 2.0
Device type: 4G LTE wireless router
Mobile network standard: 4G LTE Cat. 4
SIM card slots: 1 Nano SIM
Mobile network antennas: 2 fixed
Download speed on LTE-FDD network: Up to 150 Mbit/s
Download speed on LTE-TDD network: Up to 130 Mbit/s
Upload speed on LTE-FDD network: Up to 50 Mbit/s
Upload speed on LTE-TDD network: Up to 30 Mbit/s
Mobile network technology: 2 × 2 MIMO
EU LTE-FDD frequency bands: B1, B3, B5, B7, B8, B20, B28
EU LTE-TDD frequency bands: B38, B40, B41
WCDMA frequency bands: B1, B5, B8

Wi-Fi standard: Wi-Fi 5, IEEE 802.11ac
Wi-Fi frequency bands: 2.4 GHz and 5 GHz
Maximum Wi-Fi speed on the 2.4 GHz band: 300 Mbit/s
Maximum Wi-Fi speed on the 5 GHz band: 867 Mbit/s
Maximum total Wi-Fi speed: 1167 Mbit/s
Wi-Fi data streams: 2 × 2 in each frequency band
Wi-Fi antennas: 2 fixed
MU-MIMO: Yes, in the 5 GHz band
Maximum channel width: 80 MHz
Maximum number of connected devices: 128
Recommended number of connected devices: Up to 40
Maximum operating range: Up to 130 m in open areas
Wireless network security: WPA, WPA2, and WPA3
Guest network: 2.4 GHz and 5 GHz

Ethernet ports: 4 RJ-45
Ethernet speed: 10/100 Mbit/s
WAN/LAN port: 1 configurable
Other ports: LAN
Operating modes: Mobile network router, Wi-Fi router, and WISP
Backup connections: WAN, WISP, and mobile network
Mesh support: Cudy Mesh
Mesh connection: Wired or wireless
WPS button: Yes
Reset button: Yes

VPN Server: WireGuard, OpenVPN, IPsec, ZeroTier, PPTP, and L2TP
VPN Client: WireGuard, OpenVPN, IPsec, ZeroTier, PPTP, and L2TP
Network Protocols: IPv4 and IPv6
Firewall: SPI firewall and DoS protection
Port forwarding: Yes
DMZ: Yes
UPnP: Yes
DDNS: Yes
IPTV/VLAN: Yes
Parental controls: Yes
App management: Cudy app
Remote cloud management: Yes

Processor: 580 MHz single-core MIPS24KEC
Flash memory: 16 MB NOR
RAM: 128 MB DDR2
Power input: 12 V DC, 1 A
Power adapter input: 100–240 V, 50/60 Hz
Operating temperature: 0 °C to 40 °C
Storage temperature: −40 °C to 70 °C
Operating relative humidity: 10–90%, non-condensing
Storage relative humidity: 5–90%, no condensation
Dimensions: 204.8 × 133.2 × 38.3 mm
Net weight: 308 g
Installation: On a table or mounted on a wall
Certification: CE and FCC

Package Contents: LT500 router, power adapter, Ethernet cable, and installation instructions