KIURLAB RH+ 500ml - Wheel cleaner and degreaser

Deironizer RH+ from KiurLab - the best disc cleaner

RH+ Deironizer is a special cleaner designed to remove metallic contaminants from the surfaces of discs and brake system components. Iron and its contaminants (e.g. metallic dust from brake disc wear) often accumulate on discs as tiny specks or dirt that are difficult to remove with conventional cleaners. RH+ Disc Deioniser chemically dissolves and removes these contaminants, leaving your discs clean and shiny.

Deironizer RH+ - an advanced deironizer for disc cleaning

Deironizer RH+ KiurLab is a specialised product that effectively removes hard-to-clean metallic contaminants from aluminium and painted discs. It also helps to clean the outer surfaces of the braking system of these contaminants. Our disc cleaner works by using a de-ironing effect. Dissolving metal residues (such as iron deposits or fine rust dust) produces the so-called "bleeding disc" effect - the contaminants react with the fluid and turn red.

Advantages of the KiurLab RH+ Deioniser:

• Fast action - the product starts to "bleed" after just a few seconds
• Perfect consistency - slightly gel-like texture, which allows the product to spread well and stay on the surface to be cleaned longer
• Active cleaning agents - RH+ disc product binds metallic impurities, dissolves typical dirt and penetrates deep into the surface pores for maximum cleaning quality and effectiveness
• Longer drying time - under the right conditions, the product can remain on the surface for several minutes, making dirt removal easier and safer

How to use KiurLab RH+ Deodoriser?

RH+ Disc Deioniser is a powerful chemical product for professional use. Always use it according to the instructions. Ensure good room ventilation when working, always use protective gloves, mask and goggles.

Recommendations before use:

• Make sure the surface to be cleaned is cold.
• Shake the bottle to mix the contents
• Test the product on an inconspicuous area to ensure that it is safe for wheels or other parts of the car

KiurLab RH+ Deironizer Instructions for use:

1. Spray the product on the disc from a distance of approximately 10 cm
2. In case of heavy soiling or hard to reach areas, apply the product with a brush or toothbrush
3. Wait a few minutes for the "bleeding" effect to appear
4. Rinse the product with cold water under high pressure
5. If necessary, repeat the procedure