Details: wireless forklift camera, magnetic: easy to mount on fork arm - powered by rechargeable battery, 7" display, automatic pairing, wireless transmission range up to 100 m, 4 channel inputs: Supports dual screen mode, single screen mode and automatic display mode loop switching, each channel can be individually set for scanning, built-in recorder (supports 128 GB Micro SD card), real-time recording and video playback CAMERA: Wireless: operating frequency 2400-2483.5 MHz, IP69K - 10G - Metal housing: robust and reliable, CMOS, PAL/NTSC, 756x504px, internal sync, scanning system: 2:1 Interlace, video output: 1.0Vp-p 75Ω, 1-3m night vision, minimum illumination 0.1 Lux, 100 m viewing range, lens f=6.0 mm, 45° viewing angle, gamma consumption: 0.45, automatic AGC, S/N ratio better than 46.5 dB, automatic white balance, electronic shutter: Auto 1/60 (NTSC) / 1/50(PAL) - 1/100,000 sec, Auto BLC, MPEG4 video code, PAL frame rate: 25f/s, NTSC: 30f/s, Spread spectrum FHSS, Delay 120ms, RF bit rate 4Mbps, Operating temperature -20℃... +70 ℃ RH95%MAX, storage temperature -30 ℃ ... +80 ℃ RH95%MAX, power supply 10-32VDC - BATTERY PACK for camera, rechargeable, 8700mAh - 31.32Wh, charging voltage 5-16V: usb-cord, supplied cable with wires and 240VAC power supply, charging time 12h (5V) - 4h (12V), discharge time (@160-180mA): 12-14h, charging temp -20°C ... +45°C, discharge and storage temp -20°C ... . +60°C, IP69K, magnetic mount, 110.5x64.5x40.7mm, 400g - DISPLAY: 7", wireless: operating frequency 2400-2483.5MHz, 800x3x480 px, 500:1, 400 cd/m², 16:9, viewing angle U: 50/D: 70, R/L: 70, remote control, 4 channels, MPEG4 decompression format, reception sensitivity -89 dBm, modulation 2.4G FSK /GFSK, memory capacity. 128G, power supply 10-32VDC, power consumption max. 6W, Speaker: 1.5W/8Ω, Operation: -20~+70ºC, RH 90%, Storage: -30~+80℃, RH 90%, Supplied with U-bracket and stand for fixing in the center
