{"product_id":"ajax-vhfbridge-integracijas-modulis-ajax-vhf-radio-komunikators-8-izejas-savienojams-ar-hub-2-hub-plus-hub-2-plus-balts","title":"Ajax vhfBridge, Integration module, AJAX VHF radio communicator (8 outputs), compatible with Hub 2, Hub Plus, Hub 2 Plus, black","description":"\u003cheader class=\"col-12 text-center\"\u003e\n\u003ch1 class=\"\"\u003evhfBridge Jeweller User manual\u003c\/h1\u003e\n\u003c\/header\u003e\n\u003cdiv class=\"col-12\" data-html2canvas-ignore=\"true\"\u003e\n\u003cdiv class=\"post-thumbnail\"\u003e\u003cimg src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-og-image.jpg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-12 post-content\"\u003e\n\u003cp\u003e\u003cb\u003evhfBridge Jeweller\u003c\/b\u003e\u003cspan\u003e is a module for connecting Ajax security systems to third-party VHF transmitters. \u003c\/span\u003e\u003cspan\u003eIt provides 8 transistor outputs for connection to third-party VHF transmitters. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe device is powered from 100-240 V~ mains and can be operated from a 12 V⎓ backup battery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003evhfBridge Jeweller\u003c\/b\u003e\u003cspan\u003e operates as part of the Ajax security system and connects to the hub via the \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/jeweller-radio-protocol\/\"\u003eJeweller\u003c\/a\u003e\u003cspan\u003e secure radio communication protocol. The hub communication range is \u003c\/span\u003e\u003cb\u003eup to 1,800 meters\u003c\/b\u003e\u003cspan\u003e without obstacles. Supplied in two configurations: with a casing and without it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/vhfbridge\/\"\u003eBuy vhfBridge Jeweller\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv id=\"block1\" class=\"anchor-block\"\u003e\n\u003ch2\u003eFunctional elements\u003c\/h2\u003e\n\u003cdiv id=\"block1-1\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003eCasing elements\u003c\/h3\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-funkczionalnye-elementy.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-funkczionalnye-elementy.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eScrews securing the casing lid. Unscrew with a bundled hexagon key (Ø 4 mm).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eSpace for a 12 V⎓ backup battery.\u003c\/span\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eBattery not included with vhfBridge Jeweller set.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eQR code with the device ID. It is used to pair the device with the Ajax security system.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003ePerforated part of the casing. Necessary for tamper triggering in case of any attempt to detach the device from the surface.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003ePerforated parts of the casing for cable output.\u003c\/span\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eThe presence of the casing depends on the vhfBridge Jeweller package. The device is supplied in two configurations: with a casing and without it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv id=\"block1-2\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003evhfBridge Jeweller board elements\u003c\/h3\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-elementy-platy.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-elementy-platy.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eTerminals for connecting a 12 V⎓ backup battery.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003e100-240 V\u003c\/span\u003e\u003cspan\u003e~\u003c\/span\u003e\u003cspan\u003e power supply input.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eTamper button. Signals if vhfBridge Jeweller\u003c\/span\u003e\u003cspan\u003ecasing \u003c\/span\u003e\u003cspan\u003elid is removed.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003ePower button.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eLED indicator.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eQR code with the device ID. It is used to pair the device with the Ajax security system.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eTerminals for connecting a VHF transmitter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv id=\"block1-3\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003evhfBridge Jeweller terminals\u003c\/h3\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-klemy.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-klemy.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eBATT - input for the 12 V⎓ backup power connection.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eOUT - power output for the 12 V⎓ VHF transmitter (maximum output current is 2 A).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eOUT 1...8 - vhfBridge Jeweller outputs for connecting a VHF transmitter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block2\" class=\"anchor-block\"\u003e\n\u003ch2\u003eLED indication\u003c\/h2\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-indikacziya.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-indikacziya.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003evhfBridge Jeweller LED indicator may light up white, red, or green, depending on the status of the device.\u003c\/p\u003e\n\u003cp\u003ePlease note that the LED indicator is not visible when the casing lid is closed. The LED indicator is used at the stage of vhfBridge Jeweller connecting and configuring. Later on, the state of the device can be monitored in the Ajax app.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLED indication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eEvent\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLights up white.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eConnection with the hub is established, external power supply is connected.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLights up red.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eThere is no connection with the hub, external power supply is connected.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFor example, the hub is turned off or vhfBridge Jeweller is outside the coverage area of the hub's wireless network.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eGoes out for 0.5 seconds, then lights up green and turns off.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eEnabling vhfBridge Jeweller.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eGoes out for 0.5 seconds, then lights up green and fades out over 3 seconds.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDisabling vhfBridge Jeweller.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBlinks red once per second.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003evhfBridge Jeweller is not assigned to a hub. \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLights up for a second once every 10 seconds. \u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNo external power supply is connected to vhfBridge Jeweller.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eThe colour of the indication depends on the status of connection with the hub:\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003elights up white if there is connection with the hub;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003elights up red if there is no connection with the hub.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eDuring an alarm, gradually lights up and goes out once every 10 seconds.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNo external power supply and discharged external battery of vhfBridge Jeweller.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eThe colour of the indication depends on the status of connection with the hub:\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003elights up white if there is connection with the hub;\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003elights up red if there is no connection with the hub.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eLED indication of output status\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLED indication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput status in case of alarm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh potential output (positive trip).\u003c\/td\u003e\n\u003ctd\u003eLights up green.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLow potential output (negative trip).\u003c\/td\u003e\n\u003ctd\u003eGoes out.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block3\" class=\"anchor-block\"\u003e\n\u003ch2\u003eOperating principle\u003c\/h2\u003e\n\u003cp\u003evhfBridge Jeweller is designed to connect third-party VHF transmitters to create an additional channel for transmitting events to the CMS.\u003c\/p\u003e\n\u003cp\u003eThe communication channel with the CMS created using vhfBridge Jeweller can be used as the only or as a backup channel for communicating with the CMS (recommended more reliable option). This means that the hub can simultaneously transmit all events and alarms to the monitoring station of the security company not only through SIA (DC-09), ADEMCO 685, SurGard (Contact ID), and other proprietary protocols but also using vhfBridge Jeweller.\u003c\/p\u003e\n\u003cp\u003eThe transponder receives information about alarms and events from the hub via the Jeweller radio channel. Then, vhfBridge Jeweller transmits it to a third-party VHF transmitter via wires. The VHF transmitter, in turn, transmits all events and alarms to the CMS via a radio channel.\u003c\/p\u003e\n\u003cdiv class=\"wp-video\"\u003e\u003cvideo class=\"wp-video-shortcode\" id=\"video-28353-1\" preload=\"metadata\" controls=\"controls\"\u003e\u003c\/video\u003e\u003c\/div\u003e\n\u003cdiv class=\"video-block full-video\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eEvents can be transmitted to the CMS via the Internet and vhfBridge Jeweller in parallel. Transmission via the Internet works as the main channel because of greater reliability and informativity. The transmitted events may contain the zone number of the triggered detector, group number, user number, and other data. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003evhfBridge Jeweller works as a backup communication channel duplicating all events transmitted via the Internet. The delivery speed of events and alarms in both cases does not exceed 1 second. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAn example of the algorithm of actions in case of an alarm from a MotionProtect motion detector:\u003c\/b\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eMotionProtect has detected an alarm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eMotionProtect transmits the alarm to the hub via the Jeweller radio protocol.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eThe hub receives the MotionProtect alarm and transmits it to vhfBridge Jeweller via the Jeweller radio protocol. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eThe vhfBridge Jeweller receives the alarm from the hub and transmits it to the VHF transmitter over a wired connection.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eThe VHF transmitter receives the alarm and transmits it to the radio receiver on the CMS side via the radio channel. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eThe radio receiver receives the alarm and transmits it to the CMS software.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eThe CMS receives and processes the alarm.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003eOutput types\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan\u003evhfBridge Jeweller has 8 potential outputs for connection to a VHF transmitter. There are two types of outputs: \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eHigh potential output (positive trip). \u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eLow potential output (negative trip).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eThe high-potential output does not supply voltage in the normal state. As soon as an alarm or event occurs, the output supplies a voltage of 12-14 V⎓. The low-potential output works the other way around. In the normal state, the voltage is maintained at 12-14 V⎓, and when an alarm or event occurs, it drops to 0 V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe vhfBridge Jeweller output type and alarm pulse duration are configurable in Ajax apps.\u003c\/p\u003e\n\u003cdiv id=\"block3-1\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003eVHF transmitter power supply\u003c\/h3\u003e\n\u003cp\u003eThe vhfBridge Jeweller can supply a third-party VHF transmitter with 12 V⎓ power (maximum output current is 2 A).\u003c\/p\u003e\n\u003cp\u003eIf the VHF transmitter has a current consumption of more than 2 A, it can be powered by the vhfBridge Jeweller battery. In this case, disable battery charge tracking in the vhfBridge Jeweller settings so that the system users do not receive notifications about the vhfBridge Jeweller battery charging too long.\u003c\/p\u003e\n\u003cdiv id=\"block3-2\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003eSending events to the Central Monitoring Station (CMS)\u003c\/h3\u003e\n\u003cp\u003eThe Ajax security system can transmit alarms to the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/pro-desktop\/\"\u003ePRO Desktop\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003emonitoring app as well as the Central Monitoring Station (CMS) using\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSurGard (Contact ID)\u003c\/strong\u003e,\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eSIA DC-09 (ADM-CID)\u003c\/strong\u003e,\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eADEMCO\u003c\/strong\u003e\u003cstrong\u003e685\u003c\/strong\u003e, and other proprietary protocols. The list of supported protocols is\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/hub-cms-support\/\"\u003eavailable here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/ajax.systems\/connecting-to-cms\/\"\u003eWhich CMSs can the Ajax security system be connected to\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003eWhen an alarm is received, the monitoring station operator of the security company knows what happened and where the rapid response unit has to be sent. All Ajax devices are addressable, so events, the device type, its assigned name and room can be transmitted to the PRO Desktop and the CMS. The list of transmitted parameters may differ depending on the type of the CMS and the selected communication protocol.\u003c\/p\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003e\u003cspan\u003eYou can find vhfBridge Jeweller ID and zone number in the \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/manuals\/vhfbridge\/?_gl=1*1imiaw3*_gcl_au*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*FPAU*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*_ga*MTMxNzQ0ODM3LjE3NTYxMDQ2Mjc.*_ga_DFE4XTFKJQ*czE3NTY4OTcyNTQkbzExJGcxJHQxNzU2ODk3NjAwJGo2MCRsMCRoNTczNjM5MjAx*_ga_1C2WYPSDCY*czE3NTY4OTcyNTQkbzEwJGcxJHQxNzU2ODk3NjAxJGo2MCRsMCRoMA..#block7\" class=\"\"\u003eStates\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ein Ajax apps. The device number corresponds to the loop (zone) number.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block4\" class=\"anchor-block\"\u003e\n\u003ch2\u003eAdding to the system\u003c\/h2\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/warning.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003e\u003cb\u003evhfBridge Jeweller doesn't work with Hub, ocBridge Plus, uartBridge and third-party security central units.\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003eThe device can only be added and configured through the Ajax PRO app by a user with administrator rights.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block4-1\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003eBefore adding a device\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the\u003cspan\u003e \u003c\/span\u003e Ajax\u003ca href=\"https:\/\/ajax.systems\/software\/\" rel=\"noopener\" target=\"_blank\"\u003eapp\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eLog in to your\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/faqs\/how-to-create-the-ajax-account\/\" rel=\"noopener\" target=\"_blank\"\u003eaccount\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor create a new one.\u003c\/li\u003e\n\u003cli\u003eSelect a space or create a new one.\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/ajax.systems\/blog\/new-logic-space\/\" rel=\"noopener\" target=\"_blank\"\u003eWhat is a space\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/how-to-create-space\/\" rel=\"noopener\" target=\"_blank\"\u003eHow to create a space\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003espace\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efunctionality is available for apps of such versions or later:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAjax Security System 3.0 for iOS;\u003c\/li\u003e\n\u003cli\u003eAjax Security System 3.0 for Android;\u003c\/li\u003e\n\u003cli\u003eAjax PRO: Tool for Engineers 2.0 for iOS;\u003c\/li\u003e\n\u003cli\u003eAjax PRO: Tool for Engineers 2.0 for Android;\u003c\/li\u003e\n\u003cli\u003eAjax PRO Desktop 4.0 for macOS;\u003c\/li\u003e\n\u003cli\u003eAjax PRO Desktop 4.0 for Windows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd at least one\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/how-to-configure-a-space\/#block4\" rel=\"noopener\" class=\"\" target=\"_blank\"\u003evirtual room\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eAdd a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/tools\/devices-compatibility\/\" rel=\"noopener\" target=\"_blank\"\u003ecompatible hub\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto the space. Ensure the hub is switched on and has internet access via Ethernet, Wi-Fi, and\/or mobile network.\u003c\/li\u003e\n\u003cli\u003eEnsure the space is disarmed, and the hub is not starting an update by checking statuses in the Ajax app.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/warning.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eOnly a PRO or a space admin with the rights to configure the system can add a device to the hub.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/accounts-and-permissions\/\" rel=\"noopener\" target=\"_blank\"\u003eTypes of accounts and their rights\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv id=\"block4-2\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003eTo connect vhfBridge Jeweller\u003c\/h3\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eOpen the Ajax app. If your account has access to multiple hubs, select the one to which you want to add vhfBridge Jeweller.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eGo to the \u003c\/span\u003e\u003cb\u003eDevices\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/HubFilled-M.svg\" class=\"device-icon\" alt=\"\"\u003e\u003cspan\u003e menu and click \u003c\/span\u003e\u003cb\u003eAdd Device\u003c\/b\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eName the transponder, scan or enter the QR code manually (located on the device \u003c\/span\u003e\u003cspan\u003ecasing \u003c\/span\u003e\u003cspan\u003eand packaging), and select a room and a group (if the group mode is activated).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eClick \u003c\/span\u003e\u003cb\u003eAdd\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e- the countdown will begin.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eSwitch on vhfBridge Jeweller by holding the power button for 3 seconds. Keep in mind that the hub connection request is only sent when the integration module is turning on.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/warning.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003ePlease note that to find and pair the device, the transponder should be located within the hub's radio communication range (on the same secured premises).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eIf the connection has failed, disconnect vhfBridge Jeweller for 5 seconds and try again. If the transponder has already been assigned to another hub, turn off vhfBridge Jeweller and then follow the standard addition procedure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe connected transponder will appear in the list of hub devices in the app. Device status updates depend on \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/jeweller-radio-protocol\/\"\u003eJeweller\u003c\/a\u003e\u003cspan\u003e settings. The default status update period in the app is 36 seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block5\" class=\"anchor-block\"\u003e\n\u003ch2\u003eMalfunction counter\u003c\/h2\u003e\n\u003cfigure id=\"media-59064\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/en-vhfbridge-badge.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003cp\u003e\u003cspan\u003eWhen a vhfBridge Jeweller malfunction is detected (e.g., no external power), the Ajax app will display a red icon with a number in the upper left corner of the device icon. This number indicates the number of malfunctions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll malfunctions can be seen in the transponder states. Fields with malfunctions will be highlighted in red.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block6\" class=\"anchor-block\"\u003e\n\u003ch2\u003eIcons\u003c\/h2\u003e\n\u003cfigure id=\"media-58602\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/en-vhfbridge-badge-1.jpg\" alt=\"\"\u003e\u003c\/figure\u003e\n\u003cp\u003e\u003cspan\u003eIcons display some of the vhfBridge Jeweller states. You can check them in the Ajax app in the \u003c\/span\u003e\u003cb\u003eDevices\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/HubFilled-M.svg\" class=\"device-icon\" alt=\"\"\u003e\u003cspan\u003e tab.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIcon\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMeaning\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/SignalStrength-M.svg\" class=\"device-icon\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eJeweller Signal Strength. Displays the signal strength between the hub and vhfBridge Jeweller.\u003c\/p\u003e\n\u003cp\u003eRecommended value is 2-3 bars.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/Battery80-S.svg\" class=\"device-icon\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003eThe charge level of the battery connected to vhfBridge Jeweller.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/RexConnected-M.svg\" class=\"device-icon\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003eIs displayed when vhfBridge Jeweller is operating via a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/range-extenders\/\"\u003eradio signal range extender\u003c\/a\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/TemporaryDeactivationWholeDevice-S_red.svg\" class=\"device-icon\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003evhfBridge Jeweller is disabled.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/how-to-deactivate-device\/\"\u003eLearn more\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/TemporaryDeactivationTamperRed-M.svg\" class=\"device-icon\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003evhfBridge Jeweller tamper triggering events are disabled.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/how-to-deactivate-device\/\"\u003eLearn more\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/offline.svg\" class=\"device-icon type-2\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003eThe device has lost connection with the hub or the hub has lost connection with the Ajax Cloud server.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/not-transferred.svg\" class=\"device-icon type-2\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eThe device has not been transferred to the new hub.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/data-import\/\" rel=\"noopener\" target=\"_blank\"\u003eLearn more\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block7\" class=\"anchor-block\"\u003e\n\u003ch2\u003eStates\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eStates can be found in the Ajax app:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan\u003eGo to the \u003c\/span\u003e\u003cb\u003eDevices\u003c\/b\u003e\u003cspan\u003e \u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/HubFilled-M.svg\" class=\"device-icon\" alt=\"\"\u003e tab.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSelect vhfBridge Jeweller from the list.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMeaning\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData import\u003c\/td\u003e\n\u003ctd\u003eDisplays the error when transferring data to the new hub:\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFailed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- the device has not been transferred to the new hub.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/data-import\/\" rel=\"noopener\" target=\"_blank\"\u003eLearn more\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eMalfunction\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eClick \u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/Info-M.svg\" class=\"device-icon\" alt=\"\"\u003e\u003c\/span\u003e\u003cspan\u003e to open the list of vhfBridge Jeweller malfunctions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe field is displayed only if a battery charge malfunction is detected.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eJeweller Signal Strength\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eSignal strength between the hub and vhfBridge Jeweller. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRecommended value is 2-3 bars.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConnection via Jeweller\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eConnection status between the hub and vhfBridge Jeweller:\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eOnline\u003c\/b\u003e\u003cspan\u003e - the device is connected.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eOffline\u003c\/b\u003e\u003cspan\u003e - the device is not connected.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eBattery Charge\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eBattery charge level of the device. Displayed as a percentage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/faqs\/what-is-a-tamper\/\"\u003eHow battery charge is displayed in Ajax apps\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso, this field can display the battery status:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eCharging\u003c\/b\u003e\u003cspan\u003e - the battery is charging.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eError\u003c\/b\u003e\u003cspan\u003e - the battery has been charging for more than 40 hours.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eLid\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eThe status of tampers that respond to detachment or violation of the integrity of the casing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/faqs\/what-is-a-tamper\/\"\u003eWhat is tamper\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eExternal Power\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003eThe presence of the 100-240 V~ external power supply:\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eConnected\u003c\/b\u003e\u003cspan\u003e - the external power is connected.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eDisconnected\u003c\/b\u003e\u003cspan\u003e - the external power is disconnected.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eName of ReX range extender\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eRadio signal range extender connection status:\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eOnline\u003c\/b\u003e\u003cspan\u003e - the device is connected.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eOffline\u003c\/b\u003e\u003cspan\u003e - the device is not connected.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePlease note that the field is displayed if vhfBridge Jeweller is operated via a \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/range-extenders\/\"\u003eradio signal range extender\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePermanent Deactivation\u003c\/td\u003e\n\u003ctd\u003eShows the status of the device permanent deactivation function:\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eNo\u003c\/b\u003e\u003cspan\u003e - the device operates in normal mode and transmits all events.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eLid only\u003c\/b\u003e\u003cspan\u003e - the hub admin disabled notifications about tamper alarms.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eEntirely\u003c\/b\u003e\u003cspan\u003e - the device is completely excluded from the system operation by the hub admin. The device does not follow system commands and does not report alarms or other events.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eFirmware\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003evhfBridge Jeweller firmware version. \u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eDevice ID\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003evhfBridge Jeweller ID\/serial number. Also located on the device box, its board, and the \u003c\/span\u003e\u003cspan\u003ecasing\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eDevice No.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eDevice loop (zone) number.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block8\" class=\"anchor-block\"\u003e\n\u003ch2\u003evhfBridge Jeweller settings\u003c\/h2\u003e\n\u003cfigure id=\"media-58615\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/en-vhfbridge-nastrojka.jpg\" alt=\"\"\u003e\u003c\/figure\u003e\n\u003cp\u003e\u003cspan\u003eSettings can be changed in the Ajax app:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan\u003eGo to the \u003c\/span\u003e\u003cb\u003eDevices\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/HubFilled-M.svg\" class=\"device-icon\" alt=\"\"\u003e\u003cspan\u003e tab.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSelect vhfBridge Jeweller from the list.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eGo to \u003c\/span\u003e\u003cb\u003eSettings\u003c\/b\u003e\u003cspan\u003e by clicking the icon \u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/Settings-M.svg\" class=\"device-icon\" alt=\"\"\u003e in the upper right corner.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSet the parameters.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eClick\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBack\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eto save the new settings.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003e\u003cspan\u003ePlease note that after editing the settings, you should click the \u003c\/span\u003e\u003cb\u003eBack\u003c\/b\u003e\u003cspan\u003e button to save them.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eConfiguration\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMeaning\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eName\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003evhfBridge Jeweller name. Displayed in the text of SMS and notifications in the event feed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTo change the device name, click on the pencil icon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe name can contain up to 12 Cyrillic characters or up to 24 Latin characters.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eRoom\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eSelecting the virtual room to which vhfBridge Jeweller is assigned. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe room name is displayed in the text of SMS and notifications in the event feed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eTrack battery charge time\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eSet up the battery charge duration. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen this option is enabled, the system will send a malfunction notification if the battery connected to vhfBridge Jeweller has been charging more than 40 hours.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDisable tracking if the VHF transmitter is powered directly from the battery and not from the vhfBridge Jeweller power terminals.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003ePulse Duration, sec\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003ePulse time on an event (from 1 to 255 seconds). Set in increment of 1 second. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe default value is 5 seconds.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eJeweller Signal Strength Test\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eSwitches vhfBridge Jeweller to the Jeweller signal strength test mode. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe test allows you to check the signal strength between the hub and vhfBridge Jeweller and determine the optimal installation location.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/what-is-signal-strenght-test\/\"\u003eWhat is Jeweller Signal Strength Test?\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePermanent Deactivation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eAllows the user to disable the device without removing it from the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThree options are available:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eNo\u003c\/b\u003e\u003cspan\u003e - the device operates in normal mode and transmits all events.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eEntirely\u003c\/b\u003e\u003cspan\u003e - the device will not execute system commands or participate in automation scenarios, and the system will ignore device alarms and other notifications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cb\u003eLid only\u003c\/b\u003e\u003cspan\u003e - the system will ignore notifications about the triggering of the device tamper only.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/how-to-deactivate-device\/\"\u003eLearn more about permanent deactivation of devices\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eUser Guide\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOpens vhfBridge Jeweller User Guide in the Ajax app.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eUnpair Device\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eUnpairs vhfBridge Jeweller, disconnects it from the hub, and deletes its settings.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block8-1\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003evhfBridge Jeweller output configuration\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eBy default, vhfBridge Jeweller outputs are configured as follows:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003e1st output - intrusion\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003e2nd output - panic button\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003e3rd output - malfunction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003e4th output - tamper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003e5th output - loss of \u003c\/span\u003e\u003cspan\u003evhfBridge Jeweller\u003c\/span\u003e\u003cspan\u003e power supply\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003e6th output - power loss of the hub\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003e7th output - hub battery discharged\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003e8th output - loss of communication \u003c\/span\u003e\u003cspan\u003ebetween the hub\u003c\/span\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cspan\u003evhfBridge Jeweller\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe settings of outputs can be changed in the Ajax app:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eGo to the \u003c\/span\u003e\u003cb\u003eDevices\u003c\/b\u003e\u003cspan\u003e \u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/HubFilled-M.svg\" class=\"device-icon\" alt=\"\"\u003e tab.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eFind vhfBridge Jeweller in the list of devices.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eGo to the \u003c\/span\u003e\u003cb\u003eOutputs\u003c\/b\u003e\u003cspan\u003e menu.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eFind the output in the list and go to its \u003c\/span\u003e\u003cb\u003eSettings\u003c\/b\u003e\u003cspan\u003e by clicking the gear icon \u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/Settings-M.svg\" class=\"device-icon\" alt=\"\"\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eSet the parameters.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eClick \u003c\/span\u003e\u003cb\u003eBack\u003c\/b\u003e\u003cspan\u003e to save the new settings.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv\u003eOperating mode\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eSelecting the output operating mode:\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- vhfBridge Jeweller generates a pulse of a specified duration when activated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBistable\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- vhfBridge Jeweller changes the state of the contacts to the opposite (e.g., closed to open) when activated. In this mode, contacts will reset their state on disarming or system restore (if\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eRestoration after alarm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis enabled for the same event type as the output).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eThis setting is available for users with administrator rights or in the PRO app. If the device is connected to hubs with firmware version OS Malevich 2.27 and later.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eConfiguration\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eMeaning\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eType of Event\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eSelection of the event type to which vhfBridge Jeweller output reacts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCheck the complete list of event types and their icons \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/manuals\/vhfbridge\/?_gl=1*1imiaw3*_gcl_au*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*FPAU*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*_ga*MTMxNzQ0ODM3LjE3NTYxMDQ2Mjc.*_ga_DFE4XTFKJQ*czE3NTY4OTcyNTQkbzExJGcxJHQxNzU2ODk3NjAwJGo2MCRsMCRoNTczNjM5MjAx*_ga_1C2WYPSDCY*czE3NTY4OTcyNTQkbzEwJGcxJHQxNzU2ODk3NjAxJGo2MCRsMCRoMA..#block8-2\" class=\"\"\u003ebelow\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003eConnection type\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eSelection of the output type:\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eHigh potential output (positive trip).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eLow potential output (negative trip).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block8-2\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003eEvent types of vhfBridge Jeweller outputs\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eIcon\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cb\u003eType of event\u003c\/b\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003eOperating mode\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29632\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/notassigned-m-1.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNot assigned\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eNo\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eOutput disabled.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29644\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/intrusionalarm-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eIntrusion\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAlarm when motion, opening, and other detectors are triggered.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29656\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/firealarm-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eFire\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAlarm when fire detectors are triggered.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29668\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/medicalalarm-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003eAuxiliary alarm\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003eAlarm when pressing the auxiliary request alert button.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29680\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/panicbuttonalarm-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePanic button\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eAlarm by clicking:\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/doublebutton\/\"\u003eDoubleButton\u003c\/a\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003ca href=\"https:\/\/ajax.systems\/products\/button\/\"\u003eButton\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ein panic button mode\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eThe panic button on the \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/spacecontrol\/\"\u003eSpaceControl key fob\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eThe panic button connected to the \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/transmitter\/\"\u003eTransmitter\u003c\/a\u003e\u003cspan\u003e or \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/multitransmitter\/\"\u003eMultiTransmitter\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eThe functional button of \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/control\/\"\u003eAjax keypads\u003c\/a\u003e\u003cspan\u003e when it operates in panic button mode\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eThe virtual panic button in \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/software\/\"\u003eAjax apps\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29692\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/generalalarm-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAny alarm\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAlarm of any connected detector.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29704\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/malfunction-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMalfunction\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eAny malfunction of the connected detectors.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29716\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/powerbridge-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTransponder external power failure\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBistable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eLoss of external 110-240 V~ power supply to vhfBridge Jeweller transponder.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29728\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/batterybridge-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTransponder battery low\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBistable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003evhfBridge Jeweller backup battery is discharged.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29740\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/powerhub-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHub external power failure\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBistable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eLoss of external 110-240 V~ power supply to the hub.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29752\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/batteryhub-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHub battery low\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBistable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHub backup battery is discharged.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29764\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/tamper-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eLid\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eTriggering of tamper of any device in the system.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29776\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/armingstate-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eSecurity mode change\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBistable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eChanging the security mode of an object or group.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29788\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/generalalarmconfirmed-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eConfirmed intrusion alarm\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eConfirmed alarm according to \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/system-congifure-pd-6662-2017\/#block1\" class=\"\"\u003ePD 6662:2017\u003c\/a\u003e\u003cb\u003e.\u003c\/b\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29800\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/panicbuttonalarmconfirmed-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eConfirmed hold-up alarm\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePulse\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan\u003eConfirmed hold-up device alarm according to \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/system-congifure-pd-6662-2017\/#block1\" class=\"\"\u003ePD 6662:2017\u003c\/a\u003e\u003cb\u003e.\u003c\/b\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cfigure id=\"media-29812\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2021\/07\/connectionhub-m.jpg\" alt=\"ajax vhfbridge\"\u003e\u003c\/figure\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eHub-transponder connection loss\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eBistable\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eLoss of vhfBridge Jeweller connection with the hub \/ radio signal range extender via Jeweller channel.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003e\u003cspan\u003eThe time before sending an event regarding the loss of communication between the hub and vhfBridge Jeweller to the CMS is calculated with the following formula:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003e\"Hub \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003cspan\u003e- \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003cspan\u003edetector\" polling interval × 30 undelivered packets.\u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith the minimum values of the \"hub \u003c\/span\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003edetector\" polling interval, an event regarding the loss of communication with the hub is sent to the CMS in 6 minutes.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block9\" class=\"anchor-block\"\u003e\n\u003ch2\u003eConnecting VHF transmitter to vhfBridge Jeweller\u003c\/h2\u003e\n\u003ch4\u003eList of recommended VHF transmitters\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eHawk VHF Alarm Transmitter (FSK Electronics)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eTX750C (RDC)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eTR-41 (Puper)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003evhfBridge Jeweller can be connected to any VHF transmitter with relay inputs. Connection via UART, RS-485, and other interfaces is not supported.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003eHow to connect a VHF transmitter to vhfBridge Jeweller\u003c\/h4\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/warning.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eWhen connecting the VHF transmitter, do not twist the wires together, but solder them. The ends of the VHF transmitter wires, which will be inserted into the vhfBridge Jeweller terminals should be tinned or crimped with a special sleeve.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003eTurn off the vhfBridge Jeweller power (if power was connected).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTurn off vhfBridge Jeweller.\u003c\/li\u003e\n\u003cli\u003eSelect vhfBridge Jeweller outputs to which you want to connect the VHF transmitter.\u003c\/li\u003e\n\u003cli\u003ePull the VHF transmitter wires into the vhfBridge Jeweller\u003cspan\u003e \u003c\/span\u003e casing\u003cspan\u003e \u003c\/span\u003ethrough the holes.\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eThere are perforated sections on the casing that can be broken off so that the cable could be pulled through them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConnect the VHF transmitter to the control outputs of vhfBridge Jeweller according to the wiring diagram in the User Guide supplied by the VHF transmitter manufacturer.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFasten the cable securely to the vhfBridge Jeweller terminals using a straight screwdriver (slot PL 3.0).\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eConnect the power to the VHF transmitter.\u003c\/span\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eIf a VHF transmitter requires 12 V power to operate, it can be connected to the power terminals of the corresponding vhfBridge Jeweller zone. Do not connect the external power supply to the transmitter power terminals, as this may damage the device.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnect power to vhfBridge Jeweller.\u003c\/li\u003e\n\u003cli\u003eTurn on vhfBridge Jeweller.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block10\" class=\"anchor-block\"\u003e\n\u003ch2\u003evhfBridge Jeweller functionality testing\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eIntegration module functionality \u003c\/span\u003e\u003cspan\u003etests do not start immediately but not later than over a single \"hub \u003c\/span\u003e\u003cspan\u003e- \u003c\/span\u003e\u003cspan\u003edetector\" \u003c\/span\u003e\u003cspan\u003epolling\u003c\/span\u003e\u003cspan\u003e interval (\u003c\/span\u003e\u003cspan\u003e36 seconds\u003c\/span\u003e\u003cspan\u003e with standard hub settings)\u003c\/span\u003e\u003cspan\u003e. You can change the polling period of devices in the \u003c\/span\u003e\u003cb\u003eJeweller\u003c\/b\u003e\u003cspan\u003e menu of the hub settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTests are available in the device settings menu:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eSign in to the Ajax app.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eGo to the \u003c\/span\u003e\u003cb\u003eDevices\u003c\/b\u003e\u003cspan\u003e menu \u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/HubFilled-M.svg\" class=\"device-icon\" alt=\"\"\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eSelect vhfBridge Jeweller.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eGo to \u003c\/span\u003e\u003cb\u003eSettings\u003c\/b\u003e\u003cspan\u003e by clicking on the gear icon \u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons-new\/Settings-M.svg\" class=\"device-icon\" alt=\"\"\u003e.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cb\u003eAvailable tests:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/what-is-signal-strenght-test\/\"\u003eJeweller Signal Strength Test\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block11\" class=\"anchor-block\"\u003e\n\u003ch2\u003eSelecting vhfBridge Jeweller placement\u003c\/h2\u003e\n\u003cfigure id=\"media-58628\" class=\"wp-block-image\"\u003e\u003cimg decoding=\"async\" class=\"aligncenter\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-mesto-dlya-ustanovki.jpg\" alt=\"\"\u003e\u003c\/figure\u003e\n\u003cp\u003eThe placement of vhfBridge Jeweller determines its distance from the hub and the presence of obstacles between them that impede the passage of the radio signal: walls, inter-floor constructions, or large-sized objects located in the room.\u003c\/p\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eBe sure to check the signal strength at the installation site. If the signal strength is low (a single bar), we cannot guarantee a stable operation of the security system. At the very least, relocate the device as repositioning even by 20 cm can significantly improve signal reception.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eIf poor or unstable signal strength is still reported after the relocation of the device, use the \u003c\/span\u003e\u003ca href=\"https:\/\/ajax.systems\/en\/products\/range-extenders\/\"\u003eradio signal range extender\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen choosing the installation location, consider the distance between vhfBridge Jeweller and the VHF transmitter: the cable length should be sufficient for connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/warning.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eThe minimum distance between vhfBridge Jeweller and the radio transmitter is 2 meters and the maximum distance is 7 meters. The minimum distance is required to avoid signal overlapping. The maximum distance allowed will help avoid signal attenuation in the cable.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eMaterial and cross-section of the cable for connecting a VHF transmitter are determined by the manufacturer's requirements and the maximum current. All requirements can be found in the manual or from the customer service of the VHF transmitter manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block12\" class=\"anchor-block\"\u003e\n\u003ch2\u003evhfBridge Jeweller installation\u003c\/h2\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/warning.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003ePrior to mounting vhfBridge Jeweller, ensure that you have selected the optimal location corresponding to these instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe transponder casing should be mounted on a vertical surface. If installed on a horizontal surface, the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/support.ajax.systems\/en\/faqs\/what-is-a-tamper\/\"\u003etamper\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewill not work when somebody attempts to dismantle the transponder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo install vhfBridge Jeweller:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan\u003eRemove the vhfBridge Jeweller casing lid by unscrewing the bottom and top screws with the bundled hex wrench.\u003c\/span\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-bolty.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-bolty.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eRemove the vhfBridge Jeweller board from the holders by pulling them to the sides.\u003c\/span\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-krepleniya-dlya-platy.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-krepleniya-dlya-platy.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003ePrepare cable openings in advance by carefully breaking out the perforated parts of the casing.\u003c\/span\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-ustanovka.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-ustanovka.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eFasten the casing to a vertical surface at the chosen installation location using the bundled screws. When attaching, use all the fixation points on the casing. One of them, in the perforated part of the mount above the tamper, is needed to trigger the tamper on the back of the board in case of an attempt to tear the casing off the surface.\u003cbr\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/09\/vhfbridge-ustanovka-1.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/09\/vhfbridge-ustanovka-1.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eRun the cables into the transponder casing through the previously made holes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eInstall the vhfBridge Jeweller board into the casing on the racks.\u003c\/span\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-ustanovka-2.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-ustanovka-2.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003ca href=\"https:\/\/support.ajax.systems\/en\/manuals\/vhfbridge\/?_gl=1*1imiaw3*_gcl_au*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*FPAU*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*_ga*MTMxNzQ0ODM3LjE3NTYxMDQ2Mjc.*_ga_DFE4XTFKJQ*czE3NTY4OTcyNTQkbzExJGcxJHQxNzU2ODk3NjAwJGo2MCRsMCRoNTczNjM5MjAx*_ga_1C2WYPSDCY*czE3NTY4OTcyNTQkbzEwJGcxJHQxNzU2ODk3NjAxJGo2MCRsMCRoMA..#block9\" class=\"\"\u003eConnect VHF transmitter to vhfBridge Jeweller\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e.\u003c\/strong\u003e Follow the polarity and connection order of the wires. Securely fasten the conductors to the terminals.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eSecure the cable with cable ties using special mounts inside the casing.\u003c\/span\u003e\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-krepleniya-dlya-fiksaczii-kabelej.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-krepleniya-dlya-fiksaczii-kabelej.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eInstall a 12 V⎓ backup battery on the special holders in the casing. Please note that vhfBridge Jeweller cannot be connected to third-party power supply units.\n\u003cdiv class=\"alert\"\u003e\n\u003cdiv class=\"icon\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/themes\/ajax-support\/assets\/icons\/info.svg\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"text\"\u003e\n\u003cp\u003eWe recommend using a 12 V⎓ battery of 4 or 7 Ah. For such batteries, special holders in the casing are designed. You can also use similar batteries of a different capacity, of the matching size, and with a charging time of no more than 30 hours. The maximum dimensions of the battery to be installed in the casing are 150 × 65 × 94 mm, and the weight is 5 kg.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eConnect a backup battery to the board terminals according to the wiring diagram below (use the bundled cable). Follow the polarity and connection order of the wires. Securely fasten the conductors to the terminals.\n\u003cdiv class=\"wp-block-gallery columns-1\"\u003e\n\u003cdiv class=\"blocks-gallery-item\"\u003e\n\u003cfigure class=\"gallery-item\"\u003e\u003ca href=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-.jpg\"\u003e\u003cimg decoding=\"async\" src=\"https:\/\/support.ajax.systems\/wp-content\/uploads\/2022\/04\/vhfbridge-.jpg\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eConnect 100-240 V~ external power supply.\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003ca href=\"https:\/\/support.ajax.systems\/en\/manuals\/vhfbridge\/?_gl=1*1imiaw3*_gcl_au*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*FPAU*MTc2MTQxMzc5Mi4xNzU2MTA0NjI5*_ga*MTMxNzQ0ODM3LjE3NTYxMDQ2Mjc.*_ga_DFE4XTFKJQ*czE3NTY4OTcyNTQkbzExJGcxJHQxNzU2ODk3NjAwJGo2MCRsMCRoNTczNjM5MjAx*_ga_1C2WYPSDCY*czE3NTY4OTcyNTQkbzEwJGcxJHQxNzU2ODk3NjAxJGo2MCRsMCRoMA..#block4\" class=\"\"\u003eAdd an integration module to the system\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eInstall the lid on the casing and fix it with the bundled screws.\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eTest vhfBridge Jeweller and connected VHF transmitter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv id=\"block12-1\" class=\"anchor-block\"\u003e\u003c\/div\u003e\n\u003ch3\u003eDo not install vhfBridge Jeweller\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eOutdoors. \u003c\/span\u003e\u003cspan\u003eDoing so may cause the device to malfunction or not work properly.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\u003cspan\u003eNear metal objects or mirrors (for example, in a metal cabinet). They can shield and attenuate the radio signal.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eInside premises with temperature and humidity outside the permissible limits. \u003c\/span\u003e\u003cspan\u003eDoing so may cause the device to malfunction or not work properly.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eAt a distance less than 1 meter from the hub \u003c\/span\u003e\u003cspan\u003eor range extender. This could result in the loss of connection with the hub.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003e\n\u003cspan\u003eAt a distance less than 2 meters from the \u003c\/span\u003e\u003cspan\u003eVHF transmitter\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cspan\u003eThe minimum distance is required to avoid signal overlapping\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\"\u003eAt a distance more than 7 meters from the VHF transmitter. The maximum distance allowed will help avoid signal attenuation in the cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block13\" class=\"anchor-block\"\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cfigure id=\"media-30616\" class=\"wp-block-image\"\u003e\n\u003cfigure id=\"media-33615\" class=\"wp-block-image\"\u003e\u003c\/figure\u003e\n\u003c\/figure\u003e\n\u003cp\u003eCheck the functionality of vhfBridge Jeweller regularly. The optimal frequency of checks is once every three months. Clean the casing from dust, cobwebs, and other contaminants as they emerge. Use a soft dry cloth suitable for equipment care. Do not use any substances containing alcohol, acetone, gasoline, and other active solvents to clean the device.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block14\" class=\"anchor-block\"\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/specs\/vhfBridge-jeweller\/\" rel=\"noopener\" target=\"_blank\"\u003eAll technical specifications vhfBridge Jeweller\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/ajax.systems\/products\/specs\/vhfBridge-jeweller-without-casing\/\" rel=\"noopener\" target=\"_blank\"\u003eAll technical specifications vhfBridge Jeweller (without casing)\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"block15\" class=\"anchor-block\"\u003e\n\u003ch2\u003eWarranty\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eWarranty for the Limited Liability Company \"Ajax Systems Manufacturing\" products is valid for 2 years after the purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf the device does not work correctly, you should first contact the support service. \u003c\/span\u003e\u003cspan\u003eIn most cases, technical issues can be resolved remotely.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/ajax.systems\/warranty\"\u003eWarranty obligations\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"hand-link\"\u003e\u003ca href=\"https:\/\/ajax.systems\/end-user-agreement\"\u003eUser Agreement\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ledakcijas","offers":[{"title":"Default Title","offer_id":55852539773263,"sku":"367308960","price":124.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/7005\/0487\/files\/367308960.webp?v=1756897856","url":"https:\/\/ledakcijas.lv\/en\/products\/ajax-vhfbridge-integracijas-modulis-ajax-vhf-radio-komunikators-8-izejas-savienojams-ar-hub-2-hub-plus-hub-2-plus-balts","provider":"Ledakcijas","version":"1.0","type":"link"}